Passive voltage probes ship standard with most oscilloscopes and provide a low cost, general purpose probing solution. Generally, these probes lack the performance of an active voltage probe but provide the ruggedness and wide dynamic range suitable for visualizing signals over a broad range of applications.
The P6101B and P3010 probes are designed to complement the Tektronix family of portable DSO and ART instruments.
The P6101B, and P3010 probes are designed to complement the Tektronix family of portable DSO and ART instruments. The core of each probe's performance is supplied by a Tektronix HYBRID/SMT device.
| Key Features |
| 1 MΩ inputs |
P6101B:
1X, 15 MHz, 300 V CAT II
Readout
|
P3010:
10X, 100 MHz
|
| Molded passive voltage probes |
| Single-piece, molded rubber body |
| Lightweight ergonomic design |
| 10-times improvement in durability |
| HYBRID/SMT circuitry on multi-layer circuit board for improved performance and reliability |
| New stronger, replaceable probe tip |
Safety certification:
UL3111-2-031, CSA1010.2.031, EN61010-2-031, IEC61010-2-031
|
| UL3111-2-031, CSA1010.2.031, EN61010-2-031, IEC61010-2-031 |
| 1-year unconditional guarantee |
| Miniature probe tip compatible with a wide range of Tektronix accessories and adapters |
Mixture of high, medium, and low-frequency general-purpose relative measurements:
Engineering and Design
Service
Manufacturing
|
| Specifications |
|
|
P3010 P6101B
Passive Voltage Probes
|
|
|
| Model | P6101B | P3010 |
| Attenuation | 1X | 10X |
| Bandwidth | 15 MHz | 100 MHz |
| Comp. Range (Typical) | N.A. | 10 pF to 15 pF |
| System Input resistance | 1 MΩ | 10 MΩ |
| Input Capacitance (Typical) | 100 pF | 13 pF |
| Input RMS | 300 Vʀмѕ CAT II | 300 Vʀмѕ CAT I & II ¹
150 Vʀмѕ CAT III ²
|
| Readout |
| X |
Note:
¹ 500 V peak, duty factor
² 250 V peak, duty factor
| Specifications |
|
P3010 P6101B
Passive Voltage Probes
|
|
| Model Overview |
|
| Model | Description |
| P6101B | 1X, 15 MHz Passive Voltage Probe. |
| P3010 | 10X, 100 MHz Passive Voltage Probe |
| Specifications |
|
|
|
|
| Passive Probe |
|
|
|
|
| Model Overview |
|
|
|
|
| Model | Attenuation | Bandwidth | Input Impedance | Maximum Voltage |
| TPP0051 | 10x | 50 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0101 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0100 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0201 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0200 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| P2220 | 1X / 10X
| 10X: 200 MHz
1X: 6 MHz
| 10X: 10MOhm|| 17pF
1X: 1MOhm|| 110pF
| 10X: 300 Vrms CAT II
1X: 150 Vrms CAT II
|
| P2221 | 1X / 10X | 10X: 200 MHz
1X: 6 MHz
| 10X: 10 MΩ || 110 pF
1X: 1 MΩ || 17 pF
| 10X: 300 Vrms CAT II
1X: 150 Vrms CAT II
|
| P3010 | 10X | 100 MHz | 10 MΩ || 13 pF | 300 Vrms CAT II |
| P6101B | 1X | 15 MHz | 1 MΩ || 100 pF | 300 Vrms CAT II |
| TPP0250 | 10X | 250 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
| TPP0500B | 10X | 500 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
| TPP0502 | 2X | 500 MHz | 2 MΩ || 12.7 pF | 300 Vrms CAT II |
| P5050B | 10X | 500 MHz | 10 MΩ || 11 pF | 300 Vrms CAT II |
| P6139B | 10X | 500 MHz | 10 MΩ || 8 pF | 300 Vrms CAT II |
| TPP1000 | 10X | 1 GHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
