Passive voltage probes ship standard with most oscilloscopes and provide a low cost, general purpose probing solution. Generally, these probes lack the performance of an active voltage probe but provide the ruggedness and wide dynamic range suitable for visualizing signals over a broad range of applications.
Tektronix passive probe solutions provide high reliability and testing accuracy for basic oscilloscope measurements.
The P2220 and P2221 are compact passive probes with selectable 1X/10X attenuation designed for use with selected Tektronix oscilloscopes.
The P2220 probe is compatible with TDS200, TDS1000, TDS1000B, TDS2000, TDS2000B, and TPS2000 Series oscilloscopes. The P2220 probe also provides floating measurement capability up to 30 VRMS with TPS2000 Series oscilloscopes only.
(Note: Do not float with TDS2000, TDS2000B, TDS1000, TDS1000B, or TDS200 Series oscilloscopes.)
| Key Features |
| 1x/10x attenuation |
| 200 MHz bandwidth |
| 1.5 m length |
| UL3111-1, CSA1010.1, EN61010-1, EN61010-2-031, and IEC61010-2-031 |
| Applications |
| Relative low-frequency measurements |
| Low-frequency computer and telecom measurements |
| Power supplies |
| Low-frequency amplifiers |
| Specifications |
|
|
P2220 P2221
Passive Voltage Probe - 1x/10x
|
|
|
| Model Overview |
|
|
| Feature | 10X | 1x |
| Bandwidth | DC to 200 MHz | DC to 6 MHz |
| Probe Length | 1.5 m | 1.5 m |
| Attentuation Ratio | 10:1 | 1:1 |
| Compensation Range |
| All oscilloscopes with 1 MΩ input |
| P2220: 15 to 25 pF |
|
| P2221: 10 to 25 pF |
|
| Input Capacitance | 17.0 pF | 110 pF |
| Input Resistance | 10 MΩ | 1 MΩ |
| Maximum Input Voltage | 300 V Cat II | 150 V Cat II |
| Maximum Voltage between Reference Lead and Earth Ground | 30 Vʀмѕ ¹ | 30 Vʀмѕ ¹ |
Note:
¹ The float voltage must be subtracted from the tip to earth ground voltage. For example, if the reference lead is floated to 30 V ʀмѕ while the probe is in the 10x position, the tip voltage to the reference lead is limited to 270 V ʀмѕ.
| Specifications |
|
P2220 P2221
Passive Voltage Probe - 1x/10x
|
|
| Model Overview |
|
| Model | Description |
| P2220 | Passive Probe, 1x/10x, 200 MHz Passive Voltage Probe
Includes:
Retractable hook tip (013-0107-xx)
6-inch ground lead (196-3466-xx)
Adjustment tool (003-1433-xx)
Marker band set (016-1315-xx)
Instruction manual (071-1464-xx). ¹
|
| P2221 | Passive Probe, 1x/10x, 200 MHz Passive Voltage Probe for MSO/DPO2000 Series oscilloscopes
Includes:
Retractable hook tip (013-0107-xx)
6-inch ground lead (196-3466-xx)
Adjustment tool (003-1433-xx)
Marker band set (016-1315-xx)
Instruction manual (071-2335-xx). ¹
|
Note:
¹ The accessory quantities may differ when multiple probes are shipped with an oscilloscope/probe system.
| Specifications |
|
|
|
|
| Passive Probe |
|
|
|
|
| Model Overview |
|
|
|
|
| Model | Attenuation | Bandwidth | Input Impedance | Maximum Voltage |
| TPP0051 | 10x | 50 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0101 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0100 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0201 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| TPP0200 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
| P2220 | 1X / 10X
| 10X: 200 MHz
1X: 6 MHz
| 10X: 10MOhm|| 17pF
1X: 1MOhm|| 110pF
| 10X: 300 Vrms CAT II
1X: 150 Vrms CAT II
|
| P2221 | 1X / 10X | 10X: 200 MHz
1X: 6 MHz
| 10X: 10 MΩ || 110 pF
1X: 1 MΩ || 17 pF
| 10X: 300 Vrms CAT II
1X: 150 Vrms CAT II
|
| P3010 | 10X | 100 MHz | 10 MΩ || 13 pF | 300 Vrms CAT II |
| P6101B | 1X | 15 MHz | 1 MΩ || 100 pF | 300 Vrms CAT II |
| TPP0250 | 10X | 250 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
| TPP0500B | 10X | 500 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
| TPP0502 | 2X | 500 MHz | 2 MΩ || 12.7 pF | 300 Vrms CAT II |
| P5050B | 10X | 500 MHz | 10 MΩ || 11 pF | 300 Vrms CAT II |
| P6139B | 10X | 500 MHz | 10 MΩ || 8 pF | 300 Vrms CAT II |
| TPP1000 | 10X | 1 GHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
