Productos Fabricantes Servicios Soluciones Recursos Promociones About Us

Presupuesto Rápido: Keysight Technologies N9912C

+1 800 553 2255¿Necesita ayuda? Hable con nuestros expertos.

Keysight Technologies N9912C

FieldFox RF Analyzer; 3 kHz to 4 / 6.5 / 10 GHz

Modelo

N9912C

Familia de productos

Cable

Fabricante

Keysight Technologies

Los modelos configurados tienen las siguientes opciones:

CableAntenna & PIM AnalyzersSite Masters / Cable Testers

Configuraciones

Especificaciones clave

Vista general del producto

Recursos

Permítanos ayudarlo con su configuración exacta

Utilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.

También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.

Vista general del producto

With fully upgradable and license-key activated frequency, bandwidth, and over 20 software applications, easily customize your analysis to your requirements. Mix and match VNA and SA frequencies, and effortlessly upgrade the capabilities of your analyzer as your needs change. Choose the FieldFox software-defined configuration that best meets your needs.

Key Features

Select from cable and antenna analyzer (CAT), Vector Network Analyzer (VNA), and/or Spectrum Analyzer with desired maximum frequency.

Capture elusive signals with up to 40 MHz gap-free, real-time bandwidth.

Measure all four S-parameters simultaneously with 115 dB dynamic range.

Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup.

Perform over-the-air measurements for 5G NR and LTE.

Use GPS/GNSS for geolocation and timestamping.

Carry one lightweight unit at 3.4 kg (7.4 lb).

Base unit	FieldFox RF analyzer	Available Upgrades
Instrument functions (must pick one from CA, NA and SA, only can pick one from each group CA, NA and SA)
N9912C-CA4	Cable and antenna analyzer 4 GHz
N9912C-CA6	Cable and antenna analyzer 6.5 GHz	Frequency can be upgraded via N9912CU
N9912C-CAX	Cable and antenna analyzer 10 GHz	Frequency can be upgraded via N9912CU
N9912C-NA4	Vector network analyzer 4 GHz	Full 2 port VNA
N9912C-NA6	Vector network analyzer 6.5 GHz	Frequency can be upgraded via N9912CU
N9912C-NAX	Vector network analyzer 10 GHz	Frequency can be upgraded via N9912CU
N9912C-SA4	Spectrum analyzer 4 GHz
N9912C-SA6	Spectrum analyzer 6.5 GHz	Frequency can be upgraded via N9912CU
N9912C-SAX	Spectrum analyzer 10 GHz	Frequency can be upgraded via N9912CU
Measurement options
N9912C-010	VNA time domain	Requires network analyzer (NA)
N9912C-030	Remote control capability	Requires an iOS or an Android device
N9912C-208	USB power sensor meas. versus frequency	Require option 302
N9912C-215	TDR cable measurements	Requires an CA option
N9912C-220	Tracking generator	Requires spectrum analyzer unless VNA option is ordered
N9912C-235	Pre-amplifier	Require spectrum analyzer
N9912C-236	Interference analyzer and spectrogram	Require spectrum analyzer
N9912C-238	Spectrum analyzer time gating	Require spectrum analyzer
N9912C-302	USB power sensor support	Need to order USB power sensor. See FAQ A
N9912C-307	GPS receiver	Need to order GPA antenna, N9910X-825. See FAQ C
N9912C-308	Vector voltmeter	Require VNA option
N9912C-309	DC bias variable-voltage source	Recommend N9910X-713 cable. See FAQ D
N9912C-310	Built-in power meter	No power meter required
N9912C-312	Channel scanner	Require spectrum analyzer
N9912C-330	Pulse meas. with USB peak power sensor	Require option 302
N9912C-350	Real-time spectrum analyzer (RTSA)	Require spectrum analyzer
N9912C-352	Indoor and outdoor mapping	Require channel scanner at one from option 312, 370, 371, 378 and GPS option 307
N9912C-355	Analog demodulation	Require spectrum analyzer
N9912C-358	EMF measurements	Require spectrum analyzer and 85572A Tri-axial antenna
N9912C-361	EMI measurements	Require Spectrum analyzer
N9912C-366	Interference finder (manual mode)	Require Spectrum analyzer, GPS option 307, and 85574A Handheld direction antenna
N9912C-370	Over-the-air (OTA) LTE FDD	Require Spectrum analyzer and GPS option 307
N9912C-371	Over-the-air (OTA) LTE TDD	Require Spectrum analyzer and GPS option 307
N9912C-378	Over-the-air (OTA) 5G NR	Require Spectrum analyzer and GPS option 307
N9912C-B04	Analysis bandwidth, 40 MHz	Require Spectrum analyzer

Keysight FieldFox Models and frequency ranges:

Model	Description	CAT & VNA Frequency Range	SA Frequency	Connector
N9912C	FieldFox RF analyzer	3 kHz to 4/6.5/10 GHz	3 kHz to 4/6.5/10 GHz 2	Type-N (f)
N9913B	4 GHz FieldFox RF analyzer	30 kHz to 4 GHz	9 kHz to 4 GHz	Type-N (f)
N9912C	FieldFox RF analyzer	3 kHz to 4/6.5/10 GHz	3 kHz to 4/6.5/10 GHz 2	Type-N (f)
N9913C	4 GHz FieldFox RF analyzer	3 kHz to 4 GHz	3 kHz to 4 GHz	Type-N (f)
N9914B	6.5 GHz FieldFox RF analyzer	30 kHz to 6.5 GHz	9 kHz to 6.5 GHz	Type-N (f)
N9914C	6.5 GHz FieldFox RF analyzer	3 kHz to 6.5 GHz	3 kHz to 6.5 GHz	Type-N (f)
N9915B	9 GHz FieldFox microwave analyzer	30 kHz to 9 GHz	9 kHz to 9 GHz	Type-N (f)
N9915C	10 GHz FieldFox RF analyzer	3 kHz to 10 GHz	3 kHz to 10 GHz	Type-N (f)
N9916B	14 GHz FieldFox microwave analyzer	30 kHz to 14 GHz	9 kHz to 14 GHz	Type-N (f)
N9917B	18 GHz FieldFox microwave analyzer	30 kHz to 18 GHz	9 kHz to 18 GHz	Type-N (f)
N9918B	26.5 GHz FieldFox microwave analyzer	30 kHz to 26.5 GHz	9 kHz to 26.5 GHz	3.5 mm (m)
N9950B	32 GHz FieldFox microwave analyzer	300 kHz to 32 GHz	9 kHz to 32 GHz	2.4 mm (m)
N9951B	44 GHz FieldFox microwave analyzer	300 kHz to 44 GHz	9 kHz to 44 GHz	2.4 mm (m)
N9952B	50 GHz FieldFox microwave analyzer	300 kHz to 50 GHz	9 kHz to 50 GHz	2.4 mm (m)
N9953B	54 GHz FieldFox microwave analyzer	300 kHz to 54 GHz	9 kHz to 54 GHz	1.8 mm (m)

¿No encuentra lo que está buscando?

Póngase en contacto con nosotros