Configured models contain the following attributes:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopOption | Description |
---|---|
OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9 (hardware option) | |
Resolution bandwidth up to 80 MHz 20MHz, 40 MHz, 50 MHz and 80 MHz additionally; not installable postfactory (hardware option) For R&S®FSW43/50/67/85 | |
External generator control, retrofittable in Rohde & Schwarz service (hardware option) | |
Solid state drive, 128 GB, with analyzer firmware, for instruments with IPC11 CPU board and Windows 10 (hardware option) | |
LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option) | |
RF preamplifier, 30dB, 100kHz to 8/13GHz, for FSW8 und FSW13, retrofit in Rohde & Schwarz service (hardware option) | |
RF preamplifier, 30dB, 100kHz to 50GHz, for R&S®FSW50; retrofit in Rohde & Schwarz service (hardware option) | |
USB mass memory write protection, disables writing to USB memory sticks, ex factory only (software license) | |
Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option) | |
Extension to 80MHz signal analysis bandwidth, includes microwave preselector bypass (software license) | |
Extension to 160MHz signal analysis bandwidth, includes microwave preselector bypass, retrofittable in Rohde & Schwarz service (hardware option) | |
Real-time spectrum analyzer, 160 MHz including bandwidth extension from 80 MHz to 160 MHz (hardware option) | |
Extension to 320MHz signal analysis bandwidth, retrofittable in Rohde & Schwarz service (hardware option) | |
Extension to 512 MHz signal analysis bandwidth including 200 MHz IF filter excludes R&S®FSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option) | |
Real-time spectrum analyzer, 512 MHz including 200 MHz IF filter excludes R&S®FSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option) | |
Real-time spectrum analyzer 800 MHz, includes signal analysis bandwidth 2 GHz, for R&S®FSW26/43/50/67/85 retrofittable in R&S service (hardware option) | |
Extension to 1200 MHz signal analysis bandwidth excludes R&S®FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R (retrofit in service) (hardware option) | |
Extension to 1200 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option) | |
Extension to 2 GHz signal analysis bandwidth retrofittable in R&S service requires an R&S®RTO1044 or R&S®RTO2044 with R&S®RTO-B4 oscilloscope as external digitizer. (hardware option) | |
Extension to 2000 MHz internal signal analysis bandwidth excludes R&S®FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R only for R&S®FSW43, R&S®FSW50 (retrofit in service) (hardware option) | |
Extension to 4400 MHz signal analysis bandwidth; retrofittable in Rohde & Schwarz Service (hardware option) | |
Extension to 6400 MHz signal analysis bandwidth (HW opt.) | |
Pulse measurement application (software license) | |
AM/FM/PM Modulation analysis application for modulation analysis of analog single carrier signals (software license) | |
GSM measurement application, GSM, EDGE, EDGE Evolution and VAMOS (software license) | |
Power amplifier and envelope tracking measurement application (software license) | |
Direct DPD measurement application Requires R&S®FSW-K18 (software license) | |
Frequency response measurement application Requires R&S®FSW-K18 (software license) | |
Noise power ration measur | |
Noise figure measurement application, noise source required, preamplifier R&S®FSW-B24 recommended (software license) | |
Phase noise measurement application (software license) | |
Measurement application for detection and display of low level spurious signals (software license) | |
Transient measurement application (software license) | |
Transient measurements, extension chirp analysis, R&S®FSW-K60 required (software license) | |
Vector signal analysis application, for modulation analysis on digital modulated single carrier signals (software license) | |
3GPP FDD (WCDMA) MS measurement application, incl. HSUPA and HSUPA+ (software license) | |
CDMA2000® MS measurement application (software license) | |
3GPP 5G-NR downlink Measurement Application (software license) | |
3GPP 5G-NR uplink Measurement Application (software license) | |
User defined frequency response correction by SnP file in touch stone file format. Corrects frequency response (amplitude and phase) of measurement setup. (software license) | |
Upgrade to 2 GHz signal analysis bandwidth for R&S®FSW50 (retrofittable in service) Requires an R&S®RTO1044 or R&S®RTO2044 oscilloscope with option R&S®RTO-B4 as external digitizer. (hardware option) | |
Upgrade from 1200 MHz to 2000 MHz signal analysis bandwidth, option R&S FSW-B1200 or R&S FSW-U1200 required, user-retrofittable (software license) | |
Windows 10 OS |
Showing 1 - 6 of 36 results
Product ID: P-216810
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Product ID: P-222698
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Product ID: P-558449
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Product ID: P-549242
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Product ID: P-653962
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Product ID: P-216804
Availability confirmed on quote
Quote
Enquire about our range of financial solutions
Showing 1 - 6 of 36 results