Quick quote: Rohde & Schwarz FSW85 (1312.8000.85)

Rohde & Schwarz FSW85 (1312.8000.85)

Signal and Spectrum Analyzer; 2 Hz to 85 GHz
Model
FSW85 (1312.8000.85)
Product Family
RF & Microwave Spectrum Analyzers
Manufacturer
Rohde & Schwarz

Configured models contain the following attributes:

RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance50GHz <= 85GHzDC <= 1kHzBenchtop
Configurations
Key Specs
Product Overview
Resources

Choose your configuration

Show:

Available Options for Rohde & Schwarz FSW85 (1312.8000.85)

OptionDescription
OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9 (hardware option)
Resolution bandwidth up to 80 MHz 20MHz, 40 MHz, 50 MHz and 80 MHz additionally; not installable postfactory (hardware option) For R&S®FSW43/50/67/85
External generator control, retrofittable in Rohde & Schwarz service (hardware option)
High pass filter, improved dynamic range for measurement of harmonics, suppression of fundamental signals from 500MHz to 1.5GHz (software license)
LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option)
RF preamplifier, 30dB, 100kHz to 67GHz, for R&S®FSW67, retrofittable in R&S service (hardware option)
Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option)
Maximum Frequency 90 GHz for R&S®FSW85, without preselection for frequencies > 85 GHz (software license, only ex factory)
Extension to 160MHz signal analysis bandwidth, includes microwave preselector bypass, retrofittable in Rohde & Schwarz service (hardware option)
Real-time spectrum analyzer, 160 MHz including bandwidth extension from 80 MHz to 160 MHz (hardware option)
Extension to 320MHz signal analysis bandwidth, retrofittable in Rohde & Schwarz service (hardware option)
500MHz Signal analysis BW
Extension to 512 MHz signal analysis bandwidth
Real-time spectrum analyzer, 512 MHz including 200 MHz IF filter excludes R&S®FSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option)
Real-time spectrum analyzer 800 MHz, includes signal analysis bandwidth 2 GHz, for R&S FSW26/43/50/67/85 retrofittable in R&S service (hardware option)
Extension to 1200 MHz signal analysis bandwidth excludes R&S FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R (retrofit in service) (hardware option)
Extension to 2 GHz signal analysis bandwidth retrofittable in R&S service requires an R&S®RTO1044 or R&S®RTO2044 with R&S®RTO-B4 oscilloscope as external digitizer. (hardware option)
Extension to 4400 MHz signal analysis bandwidth, retrofittable in Rohde & Schwarz Service (hardware option)
Extension to 5 GHz signal analysis bandwidth for R&S FSW85, Requires an R&S RTO2064 oscilloscope as external digitizer (hardware Option, only ex factory)
Pulse measurement application (software license)
AM/FM/PM Modulation analysis application for modulation analysis of analog single carrier signals (software license)
Multi carrier group delay measurement application (software license)
Power amplifier and envelope tracking measurement application (software license)
Frequency response measurement application Requires R&S FSW-K18 (software license)
Noise Power Ratio Measurement (SL) (software license)
Noise figure measurement application, noise source required, preamplifier R&S®FSW-B24 recommended (software license)
Phase noise measurement application (software license)
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Transient measurements, extension chirp analysis, R&S®FSW-K60 required (software license)
Vector signal analysis application, for modulation analysis on digital modulated single carrier signals (software license)
WLAN 802.11ad measurement application R&S®FSW-B2000 is required (software license)
User defined frequency response correction by SnP file in touch stone file format. Corrects frequency response (amplitude and phase) of measurement setup. (software license)

Showing 1 - 6 of 6 results

1

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-651020

FSW-B5000 (1331.6997.85) • Extension to 5 GHz signal analysis bandwidth for R&S FSW85, Requires an R&S RTO2064 oscilloscope as external digitizer (hardware Option, only ex factory)FSW-B71 (1313.1651.26) • Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option)FSW-B90G (1331.7693.02) • Maximum Frequency 90 GHz for R&S®FSW85, without preselection for frequencies > 85 GHz (software license, only ex factory)FSW-B1200 (1331.6400.04) • Extension to 1200 MHz signal analysis bandwidth excludes R&S FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R (retrofit in service) (hardware option)FSW-B21 (1313.1100.28) • LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

2

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-229379

FSW-B4 (1313.0703.02) • OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9 (hardware option)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

3

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-647042

FSW-B10 (1313.1622.02) • External generator control, retrofittable in Rohde & Schwarz service (hardware option)FSW-K18F (1338.7230.02) • Frequency response measurement application Requires R&S FSW-K18 (software license)FSW-K19 (1331.8283.02) • Noise Power Ratio Measurement (SL) (software license)FSW-B13 (1313.0761.02) • High pass filter, improved dynamic range for measurement of harmonics, suppression of fundamental signals from 500MHz to 1.5GHz (software license)FSW-K18 (1325.2170.02) • Power amplifier and envelope tracking measurement application (software license)FSW-K50 (1325.2893.02) • Measurement application for detection and display of low level spurious signals (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

4

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-648547

FSW-K7 (1313.1339.02) • AM/FM/PM Modulation analysis application for modulation analysis of analog single carrier signals (software license)FSW-K30 (1313.1380.02) • Noise figure measurement application, noise source required, preamplifier R&S®FSW-B24 recommended (software license)FSW-K18 (1325.2170.02) • Power amplifier and envelope tracking measurement application (software license)FSW-K17 (1313.4150.02) • Multi carrier group delay measurement application (software license)FSW-K19 (1331.8283.02) • Noise Power Ratio Measurement (SL) (software license)FSW-K50 (1325.2893.02) • Measurement application for detection and display of low level spurious signals (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

5

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-366359

FSW-B512 (1331.7106.14) • Extension to 512 MHz signal analysis bandwidthFSW-B2000 (1325.4750.02) • Extension to 2 GHz signal analysis bandwidth retrofittable in R&S service requires an R&S®RTO1044 or R&S®RTO2044 with R&S®RTO-B4 oscilloscope as external digitizer. (hardware option)FSW-B21 (1313.1100.28) • LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option)FSW-B4 (1313.0703.02) • OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9 (hardware option)FSW-B71 (1313.1651.26) • Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

6

Signal and spectrum analyzer 2 Hz to 85 GHz

Product ID: P-558451

FSW-B21 (1313.1100.28) • LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option)FSW-B5000 (1331.6997.85) • Extension to 5 GHz signal analysis bandwidth for R&S FSW85, Requires an R&S RTO2064 oscilloscope as external digitizer (hardware Option, only ex factory)FSW-B512 (1331.7106.14) • Extension to 512 MHz signal analysis bandwidthFSW-B71 (1313.1651.26) • Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

Showing 1 - 6 of 6 results

NOTE: If you’re in Canada, please use the ‘Quote’ option. Online Purchase is currently only available for US addresses, either via Card or Purchase Order.

How do I select a configuration?

You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.

What’s the difference between Quote and Buy?

You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.

Can I add extra items or make special requests?

Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.

* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm lead times.

Can't find what you are looking for?

Get in touch
Can't find what you are looking for?
loader
loader logo