Keysight Technologies DSAV164A

The Infiniium V-Series family has the best-in-class signal integrity real-time oscilloscopes in the industry, delivering the most margin for your design validation. They are ideal for spectral analysis of transients and wideband RF applications.

DSA models come standard with 100 Mpts/channel, EZJIT Complete (N8823B), and Serial Data Analysis (E2688A). EZJIT Complete software (N8823B) includes all of the advanced jitter analysis features of EZJIT (E2681A) and EZJIT Plus (N5400A) and adds vertical noise analysis capabilities.

Key Features:

•      True analog bandwidth to 33 GHz on 2-CH (16GHz on 4-Ch)
•      Lowest noise floor (2.10 mV at 50 mV/div, 33 GHz)
•      Lowest intrinsic jitter (100 fs)
•      Highest Effective Number Of Bits (ENOB) values in excess of 5.5
•      Flattest frequency magnitude and phase response
•      Spurious Frequency Dynamic Range (SFDR) exceeding 50 dBc
•      80 GSa/s sample rate 2 channels / 40 GSa/s sample rate 4 channels
•      Industry deepest memory with up to 2 Gpts (100 Mpts per ch std DSA)
•      Industry longest 160-bit, 12.5 Gb/s hardware serial trigger

Infiniium V 系列家族擁有業界一流的訊號完整性即時示波器，為您的設計驗證提供最大的餘裕。它們非常適合瞬態頻譜分析和寬頻射頻應用。

DSA 型號標配 100 Mpts/通道、EZJIT Complete (N8823B) 和串列資料分析 (E2688A)。 EZJIT Complete 軟體 (N8823B) 包含 EZJIT (E2681A) 和 EZJIT Plus (N5400A) 的所有進階抖動分析功能，並增加了垂直噪音分析功能。

主要特徵：

• 2 頻道上的真實類比頻寬高達 33 GHz（4 頻道上為 16GHz）
• 最低本底雜訊（50 mV/格時為 2.10 mV，33 GHz）
• 最低的固有抖動 (100 fs)
• 最高有效位數 (ENOB) 值超過 5.5
• 最平坦的頻率幅度和相位響應
• 雜訊頻率動態範圍 (SFDR) 超過 50 dBc
• 80 GSa/s 取樣率 2 通道 / 40 GSa/s 取樣率 4 通道
• 業界最深的內存，高達 2 Gpts（每通道 100 Mpts 標準 DSA）
• 業界最長的 160 位元、12.5 Gb/s 硬體串列觸發

立即前往挑選更多 : Keysight 示波器

Most of these applications also support Spread Spectrum Clocking (SSC) where the highspeed signal is modulated, and the V-Series hardware serial trigger is able to track the SSC with its unique external reference  clock input. The hardware serial trigger will recover and generate a sub-rate clock when locked to the signal

PRBS Error Detector:

Industrys First PRBS error detector can trigger and display the bit error of the PRBS-7, 15, 23 and 31 signals. It identifies the error when the pattern does not match the expected PRBS pattern that has been set in the oscilloscope. When the next error happens, the oscilloscope will replace the display with the next bit error. This allows you to discover if the error is related to the bit pattern, which is related to Inter-Symbol Interference (ISI). The hardware serial trigger provides an eyescan plot to show the signal quality of the signal received.

Wideband and Multi-channel FFT measurements:

For frequency domain measurements that require you to see more than 500 MHz of signal spectral bandwidth and multiple FFTs simultaneously, the V-Series offers wider bandwidth than spectrum analyzers and comes standard with 4 ports (channels) per instrument.  The V-Series enables users to make wideband measurements up to 33 GHz and up to 16 simultaneous FFTs. You can analyze even higher bandwidth signals by combining the V-Series with a down converter circuit.