You are browsing the TW site. Would you like to be redirected to another country or region to see content and products specific to your location?

快速報價: EXFO FLS-300-23BL-XX

+886 701 0152 200需要幫忙？請與我們的專家聯繫

EXFO FLS-300-23BL-XX

Optical Laser Source; Handheld, 1310nm/1550nm

型號

FLS-300-23BL-XX

產品類別

Network & Fiber Installations

製造商

EXFO

配置型號包含以下特性:

Network & Fiber InstallationsFiber Optic Light Sources

配置

技术指标

產品總覽

資源

讓我們為您提供準確的配置

請使用“獲取快速報價”，我們將根據您的需求與您聯繫並報價。

您也可以選擇保持聯繫，我們會為您提供正確的應用和採購解決方案。

產品總覽

With up to three singlemode wavelengths on a single port, or four wavelengths (two multimode, and two singlemode) on two ports, the FLS-300 is the most versatile, complete light source available.

Key Features

Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters

Autonomy of 120 hours

Instrument identification available in six languages

Highest output power in the industry

Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership

Benefits
An FTTx Test Solution	This product is part of EXFO's series of FTTx optical test products. It allows for the testing of passive optical networks (PONs) at the three main wavelengths (1310, 1490 and 1550 nm) used in fiber-to-the-home (FTTH) and fiber-to-the-premises (FTTP) networks and complies with the ITU-T G.983 and G.984 Recommendation series and the IEEE 802.3ah standard.
Auto-Wavelength Recognition	The FLS-300 Light Source can transmit with a wavelength-identification digital encrypted protocol, so that any compatible unit—the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set—can automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error.
Distant Referencing	Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart.

Specifications¹
FLS-300 Lightsource Network Testing Optical
Model²	23BL	234BL	235BL	12D
Central Wavelength (nm)	1310 ± 20 1550 ± 20	1310 ± 20 1550 ± 20 1625 ± 15	1310 ± 20 1490 ± 10 1550 ± 20	850 ± 25 1300 +50/–20
Spectral Width³ (nm)	≤5	≤5	≤5	50/135
Output Power (dBm)	≥1/≥1	≥1/≥–3/≥–5	≥1/≥–4.5/≥–3	≥–20/≥–20 (62.5/125 µm)
Power Stability ⁴ (dB) (8 Hours)	±0.10	±0.10	±0.10	±0.10
Battery Life ⁵ (Hours)	120	100	120	120
Enables Automatic Wavelength Recognition	Yes	Yes	Yes	Yes
Tone Generation (Hz)	270, 1 k, 2 k	270, 1 k, 2 k	270, 1 k, 2 k	270, 1 k, 2 k
Warranty and Recommended Calibration Interval (years)	3	3	3	3

Notes:

¹. Guaranteed unless otherwise specified.

². All specifications valid at 23 °C ± 1 °C, with an FC connector.

³. rms for lasers and —3 dB width for LEDs; typical values for LEDs.

⁴. After 15 minutes warmup; expressed as ± half the difference between the maximum and minimum values measured during the period, with an APC connector on the power meter.

⁵ . Typical autonomy in Auto mode.

Specifications
FLS-300 Light Source
Model Overview
Model (FLS-300-XX)	Description
FLS-300-12D	850/1300 nm LED 62.5/125 µm
FLS-300-23BL	1310/1550 nm laser 9/125 µm *
FLS-300-234BL	1310/1550/1625 nm laser 9/125 µm
FLS-300-235BL	1310/1490/1550 nm laser 9/125 µm *
FLS-300-12D-23BL	850/1300 nm LED 62.5/125 µm 1310/1550 nm laser 9/125 µm
Connector (FLS-300-XX-XX)
EI-EUI-28	UPC/DIN 47256
EI-EUI-76	UPC/HMS-10/AG
EI-EUI-89	UPC/FC narrow key
EI-EUI-90	UPC/ST
EI-EUI-91	UPC/SC
EI-EUI-95	UPC/E-2000
EI-EUI-98	UPC/LC
EA-EUI-28	APC/DIN 47256 *
EA-EUI-89	APC/FC narrow key *
EA-EUI-91	APC/SC
EA-EUI-95	APC/E-2000 *
EA-EUI-98	APC/LC

Note:

* EA-EUI only available on models 23BL, 234BL and 235BL.

找不到您要的?

聯繫方式