You are browsing the MEA site. Would you like to be redirected to another country or region to see content and products specific to your location?

Rohde & Schwarz ZNA26 (1332.4500.22)

Vector Network Analyzer; 2 Port, 3.5 mm (m) Connectors, 10 MHz to 26.5 GHz
Model
ZNA26 (1332.4500.22)
Product Family
RF & Microwave Network Analyzers
Manufacturer
Rohde & Schwarz

Configured models contain the following attributes:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz3.5mm-Male (Jack)Benchtop
Configurations
Key Specs
Product Overview
Resources

Choose your configuration

Show:

Available Options for Rohde & Schwarz ZNA26 (1332.4500.22)

OptionDescription
mmWave converter LO, 10 MHz to 26.5 GHz, for R&S ZNA Enables mmWave converter setups utilizing a R&S ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S ZNA-B26, Direct IF access, or R&S ZNA-B5, 2nd inte
Direct IF access for R&S ZNA (Hardware option)
mmWave converter support for R&S ZNA, R&S ZVA-Zxxx, R&S ZCxxx (software license)
Precision frequency reference for R&S®ZNA (Hardware option)
Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
Direct source and receiver access for R&S®ZNA26 (2 ports) Installation ex factory only (Hardware option)
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Direct IF access for R&S®ZNA (Hardware option)
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)
Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Low noise pre-amplifier receiver port 2
Low power spurious reduction, Port 1
Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
19 inch adapter BW2010, cabinet 6HU 1/1

Showing 1 - 3 of 3 results

1

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product ID: P-248448

ZNA26-B16 (1332.4581.22) • Direct source and receiver access for R&S®ZNA26 (2 ports) Installation ex factory only (Hardware option)ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA26-B501 (1332.5220.11) • Low power spurious reduction, Port 1ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote

Enquire

Source New

Enquire about our range of financial solutions

2

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product ID: P-558555

ZNA-B26 (1332.4598.02) • Direct IF access for R&S ZNA (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S ZNA Enables mmWave converter setups utilizing a R&S ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S ZNA-B26, Direct IF access, or R&S ZNA-B5, 2nd inteZNA-K8 (1332.5388.02) • mmWave converter support for R&S ZNA, R&S ZVA-Zxxx, R&S ZCxxx (software license)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote

Enquire

Source New

Enquire about our range of financial solutions

3

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product ID: P-411674

ZNA26-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-K7 (1332.5371.02) • Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)ZZA-KN6 (1175.3056.00) • 19 inch adapter BW2010, cabinet 6HU 1/1ZNA26-B501 (1332.5220.11) • Low power spurious reduction, Port 1ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B7 (1332.4546.02) • Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
Rent

Availability confirmed on quote

Quote

Buy Used

Availability confirmed on quote

Enquire

Source New

Enquire about our range of financial solutions

Showing 1 - 3 of 3 results

* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, VAT or sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm timescales.

Can't find what you are looking for?

Get in touch
Can't find what you are looking for?
loader
loader logo