Los modelos configurados tienen las siguientes opciones:
Telecommunication Transmission TestersTransmission Tester Portable >100GBitOpción ID | Descripción |
---|---|
Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564) and multi-stream support for 25GE optical rate. It includes dual port layer 2 EtherBERT capabilities. | |
Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564) and multi-stream support for 40GE /IEEE802.3ba (41.25 Gb/s) optical rate. It includes dual port layer 2 EtherBERT capabilities. | |
128 GB internal flash storage | |
Enables EtherBERT, RFC2544, EtherSAM Y.1564, Traffic Generation and Monitoring, and Smart Loopback at 200G based on IEEE802.3bs Includes the following options: � 200GE [Notes] ! Available for MAX-840-100 ! Available for MAX-840-400 | |
Fiber Channel package includes 1X,2X,4X,8X,10X,16X,32X Rates, Includes the following options: FC1X, FC2X, FC4X, FC8X, FC10X, FC16X, FC32X | |
MF READY Digital Video Inspection Probe - NO Automated PASS-FAIL analysis - Triple Magnification - ConnectorMax2 Software [APC or UPC Bulkhead and Patchcord tips] **(-XX): APC or UPC must be specified upon ordering UPC Bulkhead Includes: - FIPT-400-FC-SC: FC-SC Bulkhead tip - FIPT-400-U25M: Universal patchcord tip (2.5mm ferrule) APC Bulkhead Includes: - FIPT-400-SC-APC: SC APC tip for bulkhead adapter - FIPT-400-U25MA: Universal patchcord tip for 2,5 mm ferrules APC [Also including] - FIPT-BOX: Compartmented plastic case for tips - GP-2175: Protective cap & cord assembly - GP-3108: Compartmented soft pouch | |
MF READY Analysis Digital Video Inspection Probe - Automated PASS-FAIL analysis - Triple Magnification - Auto Center - ConnectorMax2 Software [APC or UPC Bulkhead and Patchcord tips] **(-XX): APC or UPC must be specified upon ordering UPC Bulkhead Includes: - FIPT-400-FC-SC: FC-SC Bulkhead tip - FIPT-400-U25M: Universal patchcord tip (2.5mm ferrule) APC Bulkhead Includes: - FIPT-400-SC-APC: SC APC tip for bulkhead adapter - FIPT-400-U25MA: Universal patchcord tip for 2,5 mm ferrules APC [Also including] - FIPT-BOX: Compartmented plastic case for tips - GP-2175: Protective cap & cord assembly - GP-3108: Compartmented soft pouch | |
MF READY Analysis Digital Video Inspection Probe - Automated PASS-FAIL analysis - Triple Magnification - Auto Center - ConnectorMax2 Software [APC or UPC Bulkhead and Patchcord tips] **(-XX): APC or UPC must be specified upon ordering UPC Bulkhead Includes: - FIPT-400-FC-SC: FC-SC Bulkhead tip - FIPT-400-U25M: Universal patchcord tip (2.5mm ferrule) APC Bulkhead Includes: - FIPT-400-SC-APC: SC APC tip for bulkhead adapter - FIPT-400-U25MA: Universal patchcord tip for 2,5 mm ferrules APC [Also including] - FIPT-BOX: Compartmented plastic case for tips - GP-2175: Protective cap & cord assembly - GP-3108: Compartmented soft pouch* | |
MF READY Wireless Analysis Digital Video Inspection Probe - Automated Focus - Automated PASS-FAIL analysis - Triple Magnification - Auto Center - ConnectorMax2 Software - ConnectorMax2 Mobile Software ! Available on App Store and Google Play [APC or UPC Bulkhead and Patchcord tips] **(-XX): APC or UPC must be specified upon ordering UPC Bulkhead Includes: - FIPT-400-FC-SC: FC-SC Bulkhead tip - FIPT-400-U25M: Universal patchcord tip (2.5mm ferrule) APC Bulkhead Includes: - FIPT-400-SC-APC: SC APC tip for bulkhead adapter - FIPT-400-U25MA: Universal patchcord tip for 2,5 mm ferrules APC [Also including] - FIPT-BOX: Compartmented plastic case for tips - GP-2225: USB to Micro USB cable - GP-2226: Rechargeable battery (qty:1) - GP-2227: USB AC adapter ! For North America, Japan, China, Europe, Argentina, India Australia and New-Zealand, United-Kingdom - GP-2175: Protective cap & cord assembly - GP-3108: Compartmented soft pouch | |
SFP Multirate Optical Transceiver module Rates: 155/622 Mb/s, 2.5/2.7 Gb/s, GigE/FC/2FC 1310 nm, LC, SMF, 15 km reach | |
SFP Multirate Optical Transceiver module Rates: 155/622 Mb/s, 2.5/2.7 Gb/s, GigE/FC/2FC 1550 nm, LC, SMF, 40 km reach | |
SFP Multirate Optical Transceiver module Rates: GigE/FC/2FC 850 nm, LC, MMF, < 500 m reach | |
SFP Multirate Optical Transceiver module Rates: GigE/FC/2FC 1310 nm, LC, SMF, 10 km reach | |
SFP Bi-Directional Optical Transceiver module Rates: 1000 Base-BX10 1490 TX / 1310 RX, SMF, 10 km reach [Notes] ! Should be sold as a pair with FTB-8597 | |
SFP Bi-Directional Optical Transceiver module Rates: 1000 Base-BX10 1310 TX / 1490 RX, SMF, 10 km reach [Notes] ! Should be sold as a pair with FTB-8596 | |
SFP Bi-Directional Optical Transceiver module Rates: 1000 Base-BX40 1310 TX / 1490 / 1550 RX, SMF, 40 km reach [Notes] ! Should be sold as a pair with FTB-8599 | |
SFP Bi-Directional Optical Transceiver module Rates: 1000 Base-BX40 1550 TX / 1310 RX, SMF, 40 km reach [Notes] ! Should be sold as a pair with FTB-8598 | |
SFP+ Multirate Optical Transceiver module FC10X, 10GigE LAN/WAN Rates: 9.95-10.3 Gb/s 850 nm, LC, MMF, 300 m reach [Notes] ! Not rated for SONET/SDH | |
SFP+ Multirate Optical Transceiver module Sonet/SDH, FC10X, 10GigE LAN/WAN Rates: 9.95-11.1 Gb/s 1550 nm, LC, SMF, 40 km reach | |
SFP+ Multirate Optical Transceiver module Sonet/SDH, FC8/10X, 10GigE LAN/WAN, OTU2, OTU1e/2e Rates: 9.95-11.1 Gb/s 1550 nm, LC, SMF, 80 km reach | |
Large Size Soft Carrying Case | |
Ruggedized Carrying Case | |
Alternative Rigid Carrying Case order code Replace the default GP-10-072 Large Size Soft Carrying Case by a GP-10-097 Ruggedized Carrying Case [Notes] ! MUST be ordered along with the related unit and on the same P.O. | |
Transceiver System Filler | |
Transceiver System Protective Case | |
IP testing | |
Enables Layer 2 Control Protocol tests within EtherSAM at 1, 10, 40 and 100GE. [Notes] ! Not supported at 25GE, 50GE, 200GE and 400GE | |
Capability to display Link Layer Discovery Protocol (LLDP) information at supported Ethernet rates. | |
Remove Built-in Wi-Fi and Bluetooth HARDWARE This option makes impossible the addition of RF without returning the mainframe to one of EXFO's service center for upgrade. | |
QSFP-DD Innolight 400G-DR4 500m MPO-12 Innolight QSFP-DD 400G-DR4 1310nm 500m SMF 4x106G PAM4 MPO-12 | |
QSFP-DD Innolight 400G-FR4 2km LC Innolight QSFP-DD 400G-FR4 1310nm 2km SMF 4x106G PAM4 LC | |
QSFP-DD Innolight 400G-DR4+ 2km MPO-12 Innolight QSFP-DD 400G-DR4+ 1310nm 2km SMF 4x106G PAM4 MPO-12 | |
QSFP-DD Innolight 400G-LR4 10km LC Innolight QSFP-DD 400G-LR4 1310nm 10km SMF 4x106G PAM4 LC | |
Finisar 40GBASE-LR4 10km 1310nm 4x10 CWDM LC | |
Innolight, QSFP28 DR Single lambda 100GBASE-DR 500m, SMF, 1310nm Duplex LC | |
Innolight, QSFP28 FR1 Single lambda 100G-FR 2km, SMF, 1310nm Duplex LC | |
Innolight - QSFP28 LR1 Single lambda 100G-LR 10km, SMF, 1310nm Duplex LC | |
Finisar - QSFP28 Fin 100GBASE-SR4/OTU4 128GFC Multi Rate 100 m MMF 4x25/28G MPO12 | |
Finisar QSFP28 100GBASE-LR4/OTU4 Multi-Rate 10 km SMF 4x28G LAN WDM LC [Notes] ! Not compatible with single-lambda 100G transceivers such as QSFP-85985 | |
Sandstone QSFP28 100GBASE-CLR4/CWDM4 Single-Rate 2 km SMF 4x25G LC [Notes] ! Not compatible with single-lambda 100G transceivers such as QSFP-85984 | |
Sandstone QSFP28 100GBASE-LR4/OTU4 Multi-Rate 10 km SMF 4x28G LAN WDM LC [Notes] ! Not compatible with single-lambda 100G transceivers such as QSFP-85985 | |
Enabling built-in Wi-Fi and Bluetooth Capability [Notes] ! The RF option is not available for sale in China | |
Enables the ability to perform TCP stateful throughput measurements, including RFC 6349, at selected activated Ethernet rates. Also includes DTS-NAT and iPerf v2/v3 responder Includes the following options: � RFC6349 � RFC6349_40-100GE | |
Standard display | |
Enhanced display for outdoor use | |
SFP+ Multirate Optical Transceiver module Rates: 10GigE LAN/WAN, FC4/8/10X, OTU2, OTU1e/2e/1f/2f, CPRI/OBSAI (1.228-9.83Gb/s) 1550 nm, LC, SMF, 40 km reach [Notes] ! Not rated for SONET/SDH | |
SFP+ Multirate Optical Transceiver module Rates: 4FC/8FC/16FC 850 nm, MMF, 100 m reach | |
SFP+ Multirate Optical Transceiver module Rates: 4FC/8FC/16FC 1310 nm, SMF, 10 km reach | |
Finisar SFP+ 850 nm VCSEL 100 m MMF (OM4) 8/16/32FC 8.5/14.025/28.05 Gb/s | |
Finisar SFP+ 850 nm VCSEL 100 m MMF (OM4) 25GE-SR 25.78 Gb/s | |
Sumitomo SFP+ 1310 nm DFB-LD 25G 10 km SMF Duplex LC Rates: eCPRI-25G, CPRI (24.33 Gb/s), 25GBASE-LR (25.78 Gb/s) | |
SFP+ Multirate Optical Transceiver module FC8/10X, 10GigE LAN/WAN Rates: 8.5, 9.95-11.3 Gb/s 1310 nm, LC, SMF, 10 km reach | |
SFP+ Multirate Optical Transceiver module Sonet/SDH, 10GigE LAN/WAN, OTU2, OTU1e/2e, OTU1f/2f Rates: 8.5, 9.95-11.3 Gb/s 1310 nm, LC, SMF, 10 km reach | |
Dual Port QSFP+/QSFP28 Transceiver System. QSFP+ allows 40GE and OTU3 rates. QSFP28 allows 100GE and OTU4 rates. [Notes] ! Rate availability is determined by the module inserted in the Transceiver System | |
Dual Port SFP/SFP+/SFP28 Transceiver System SFP allows typically rates from 100M to 1G SFP+ allows typically rates from 8.5G to 16G SFP28 allows typically rates at 24G to 28G | |
Test Jumper MPO-12 QSFP+ 8 Fiber Multimode OM3 50/125 nm 3 mm Round Cable 2 m | |
Loopback MPO-12 QSFP+ 12 Fiber Multimode 50/125 nm | |
Test Jumper MPO-24 Loopback Multimode 24 Fiber 50/125 nm CXP Pin Out | |
Test Jumper MPO-24 to MPO-24 Multimode Fiber Ribbon, 5 m |
Mostrando 1 - 1 de 1 resultados
ID de producto: P-656375
Confirmado en Presupuesto
Presupuesto
Pregunte ahora para conocer más
Mostrando 1 - 1 de 1 resultados