Productos Fabricantes Servicios Soluciones Recursos Promociones About Us

Presupuesto Rápido: Vanguard TRI-PHASE

+1 800 553 2255¿Necesita ayuda? Hable con nuestros expertos.

Vanguard TRI-PHASE

Tri-Phase; True Three-Phase Transformer Turns-Ratio Tester

Modelo

TRI-PHASE

Familia de productos

Electrical & Power Quality

Fabricante

Vanguard

Los modelos configurados tienen las siguientes opciones:

Electrical & Power QualityTransformer and Motor Testing

Configuraciones

Especificaciones clave

Vista general del producto

Recursos

Permítanos ayudarlo con su configuración exacta

Utilice "Presupuesto Rápido" y nos pondremos en contacto con usted y le cotizaremos para su necesidad exacta.

También puede ponerse en contacto, si lo prefiere, y nuestros expertos podrán orientarlo con la aplicación y la solución de adquisición adecuadas para este producto.

Vista general del producto

The Tri-Phase is a true three-phase transformer turns-ratio tester designed to conform to the IEEE C57.12.90 measurement standard. The Tri-Phase generates and outputs a three-phase excitation test voltage to the three transformer primary windings. The induced three-phase secondary voltages are sensed, and the transformer turns-ratio is calculated. The Tri-Phase can measure turns-ratios from 0.8 to 15,000. The three-phase turns-ratios, excitation current, and phase angle readings are displayed on the unit’s LCD screen. Since a three-phase voltage is used to excite the transformer windings, the Tri-Phase can detect and measure turns-ratios of any transformer type, including phase-shifting transformers.

Key Features

Generates 3-phase transformer test voltage from single-phase AC or DC power input

Capable of detecting 130 different 3-phase transformer types defined by ANSI, IEC, and Australian standards

3 test voltages: 8Vac, 40Vac, and 100Vac

RS-232C and USB PC interfaces

Built-in 4.5” wide thermal printer

Specifications
Tri-Phase True 3-Phase Transformer Turns Ratio Tester
Features	Parameters
Dimensions	21”W x 9”H x 17” D (53 cm x 24 cm x 43 cm)
Weight	35 lbs (15.8 Kg)
Measuring Method	ANSI/IEEE C57.12.90
Typical Turns Ratio Accuracy	8 Vac: 0.8 ¬ 1,000 (±0.08%), 1,001 ¬ 4,000 (±0.1%), 4,001 ¬ 15,000 (±0.25%) 40 Vac: 0.8 ¬ 1,000 (±0.05%), 1,001 ¬ 4,000 (±0.1%), 4,001 ¬ 15,000 (±0.2%) 100 Vac: 0.8 ¬ 1,000 (±0.05%), 1,001 ¬ 4,000 (±0.1%), 4,001 ¬ 15,000 (±0.2%)
Test Voltages	Three-phase; 8 Vac @ 1 Amp 40 Vac @ 0.2 Amps 100 Vac @ 0.1 Amp
Display	Back-lit LCD screen (128 x 64 pixels) Viewable in bright sunlight and low-light levels
Printer	Built-in 4K” wide thermal printer
PC Software	Windows®-based transformer turns-ratio analysis software is included with purchase
Internal Test Record Storage	stores 112 complete transformer test records, each record holding the test record header and up to 99 readings
Safety	designed to meet UL 61010A-1 and CAN/CSA C22.2 No. 1010.1-92 standards
Temperature	Operating: -10°C to +50°C (+15°F to +122°F) Storage: -30°C to +70°C (-22°F to +158°F)
Cables	15-foot (4.57m) single-phase set 15-foot (4.57m) 3-phase set 25-foot (7.62m) extension set Safety ground power USB RS-232C Cable bag
Options	shipping case, 30' (9.14 m) 3-phase H and X leads, 30' (9.14 m) single phase H and X leads
Input Power	100 ¬ 240 Vac, 50/60 Hz, 3 amps
Ratio Measuring Range	0.8 ¬ 15,000 : 1 (5-digit resolution)
Current Reading Range	0 ¬ 1 Ampere, accuracy: ±0.1mA, ±2% of reading (±1 mA)
Phase Angle Measurement	0 ¬ 360 degrees accuracy: ±0.2 degree (±1 digit)
Computer Interfaces	One RS-232C port One USB port
Internal Test Plan Storage	Stores up to 128 transformer test plans; plans can be transferred to PC.
External Data Storage	Up to 999 test records on external USB flash drive (drive not included)
Humidity	90% RH @ 40°C (104°F) non-condensing
Altitude	2,000 m (6,562 ft) to full safety specifications
ITC Contact	240 Vac, 2A

Note:

Specifications are valid at nominal voltage and ambient temperature of +25°C (+77°F).

¿No encuentra lo que está buscando?

Póngase en contacto con nosotros