Configured models contain the following attributes:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopOption | Description |
---|---|
OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9 (hardware option) | |
Resolution bandwidth up to 80 MHz 20MHz, 40 MHz, 50 MHz and 80 MHz additionally; not installable postfactory (hardware option) For R&S®FSW43/50/67/85 | |
External generator control, retrofittable in Rohde & Schwarz service (hardware option) | |
Solid state drive, 128 GB, with analyzer firmware, for instruments with IPC11 CPU board and Windows 10 (hardware option) | |
LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service (hardware option) | |
RF preamplifier, 30dB, 100kHz to 8/13GHz, for FSW8 und FSW13, retrofit in Rohde & Schwarz service (hardware option) | |
RF preamplifier, 30dB, 100kHz to 50GHz, for R&S®FSW50; retrofit in Rohde & Schwarz service (hardware option) | |
USB mass memory write protection, disables writing to USB memory sticks, ex factory only (software license) | |
Analog base band inputs, analysis bandwidth 40MHz, for R&S®FSW26 and R&S®FSW43, retrofittable in Rohde & Schwarz service (hardware option) | |
Extension to 80MHz signal analysis bandwidth, includes microwave preselector bypass (software license) | |
Extension to 160MHz signal analysis bandwidth, includes microwave preselector bypass, retrofittable in Rohde & Schwarz service (hardware option) | |
Real-time spectrum analyzer, 160 MHz including bandwidth extension from 80 MHz to 160 MHz (hardware option) | |
Extension to 320MHz signal analysis bandwidth, retrofittable in Rohde & Schwarz service (hardware option) | |
Extension to 512 MHz signal analysis bandwidth including 200 MHz IF filter excludes R&S®FSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option) | |
Real-time spectrum analyzer, 512 MHz including 200 MHz IF filter excludes R&S®FSW-B/U160/B/U320/B/U1200 (retrofit in service) (hardware Option) | |
Real-time spectrum analyzer 800 MHz, includes signal analysis bandwidth 2 GHz, for R&S®FSW26/43/50/67/85 retrofittable in R&S service (hardware option) | |
Extension to 1200 MHz signal analysis bandwidth excludes R&S®FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R (retrofit in service) (hardware option) | |
Extension to 1200 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option) | |
Extension to 2 GHz signal analysis bandwidth retrofittable in R&S service requires an R&S®RTO1044 or R&S®RTO2044 with R&S®RTO-B4 oscilloscope as external digitizer. (hardware option) | |
Extension to 2000 MHz internal signal analysis bandwidth excludes R&S®FSW-B160/U160/B160R/B320/ U320/B512/U512/B512R/U512R only for R&S®FSW43, R&S®FSW50 (retrofit in service) (hardware option) | |
Extension to 4400 MHz signal analysis bandwidth; retrofittable in Rohde & Schwarz Service (hardware option) | |
Extension to 6400 MHz signal analysis bandwidth (HW opt.) | |
Pulse measurement application (software license) | |
AM/FM/PM Modulation analysis application for modulation analysis of analog single carrier signals (software license) | |
GSM measurement application, GSM, EDGE, EDGE Evolution and VAMOS (software license) | |
Power amplifier and envelope tracking measurement application (software license) | |
Direct DPD measurement application Requires R&S®FSW-K18 (software license) | |
Frequency response measurement application Requires R&S®FSW-K18 (software license) | |
Noise power ration measur | |
Noise figure measurement application, noise source required, preamplifier R&S®FSW-B24 recommended (software license) | |
Phase noise measurement application (software license) | |
Measurement application for detection and display of low level spurious signals (software license) | |
Transient measurement application (software license) | |
Transient measurements, extension chirp analysis, R&S®FSW-K60 required (software license) | |
Vector signal analysis application, for modulation analysis on digital modulated single carrier signals (software license) | |
3GPP FDD (WCDMA) MS measurement application, incl. HSUPA and HSUPA+ (software license) | |
CDMA2000® MS measurement application (software license) | |
3GPP 5G-NR downlink Measurement Application (software license) | |
3GPP 5G-NR uplink Measurement Application (software license) | |
User defined frequency response correction by SnP file in touch stone file format. Corrects frequency response (amplitude and phase) of measurement setup. (software license) | |
Upgrade to 2 GHz signal analysis bandwidth for R&S®FSW50 (retrofittable in service) Requires an R&S®RTO1044 or R&S®RTO2044 oscilloscope with option R&S®RTO-B4 as external digitizer. (hardware option) | |
Upgrade from 1200 MHz to 2000 MHz signal analysis bandwidth, option R&S FSW-B1200 or R&S FSW-U1200 required, user-retrofittable (software license) | |
Windows 10 OS |
Showing 1 - 6 of 36 results
Product ID: P-216810
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-222698
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-558449
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-549242
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-653962
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-216804
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Showing 1 - 6 of 36 results
How do I select a configuration?
You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.
What’s the difference between Quote and Buy?
You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.
Can I add extra items or make special requests?
Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.