Keysight Technologies N9962B

Opción ID	Descripción
N9962B-030	Remote control capability
N9962B-208	USB power sensor measurements versus frequency
N9962B-209	Extended range transmission analysis (ERTA)
N9962B-220	Full-band tracking generator
N9962B-235	Pre-amplifier
N9962B-236	Interference analyzer and spectrogram
N9962B-238	Spectrum analyzer time gating
N9962B-302	USB power sensor support
N9962B-307	GPS receiver
N9962B-309	DC bias variable-voltage source
N9962B-310	Built-in power meter
N9962B-312	Channel scanner
N9962B-320	Reflection measurements (return loss, VSWR and scalar measurements)
N9962B-330	Pulse measurements
N9962B-350	Real-time spectrum analyzer (RTSA)
N9962B-351	I/Q analyzer
N9962B-352	Indoor and outdoor mapping
N9962B-353	IQ streaming
N9962B-355	Analog demodulation
N9962B-356	Noise figure measurements
N9962B-358	EMF measurements
N9962B-360	Phased array antenna control
N9962B-370	Over the air LTE FDD measurements
N9962B-377	Over the air 5G TF measurements
N9962B-378	Over-the-air (OTA) 5G NR measurements
N9962B-B04	Bandwidth, 40 MHz
N9962B-B10	Bandwidth, 100 MHz

Atributo	Valor
High Frequency (range)	20GHz <= 50GHz
Low Frequency (range)	1kHz <= 100kHz

Vista general del producto

Given the new dynamics of wideband, microwave and millimeter wave communications, Keysight developed the next generation FieldFox Microwave Analyzer with 120 MHz of real-time bandwidth and frequency coverage up to 50 GHz. To address the millimeter wave frequency requirements for 5G, satellite and automotive radar industries, FieldFox can easily extend its frequency up to 110 GHz with an add-on downconverter.

FieldFox is also the industries most integrated handheld analyzer supporting over 20 key RF and microwave instrument functions including signal analyzer, full 2-port vector network analyzer, real-time spectrum analyzer, over-the-air demodulation, CW signal source, power meter and many more, in an all-in-one field proof package.

Key Features

Expand capabilities with real-time spectrum analyzer or tracking generator options.

Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup.

Capture intermittent signals with 120 MHz gap-free, real-time bandwidth.

Characterize radar pulse profiles with a portable solution.

Perform over-the-air measurements for 5G NR and LTE.

Capture I/Q data for RF signal monitoring and analysis.

Use GPS/GNSS for geolocation and timestamping.

Carry one lightweight unit at 3.4 kg (7.4 lb).

Benefits

Built For 5G

5G technologies provide dramatic network speed improvement and superfast connection time.

5G New Radio (NR) is the 3rd Generation Partnership Project (3GPP) standard for the wireless network running on the sub-7.125 GHz frequency band (FR1) and above 24.250 GHz on the millimeter-wave (mmWave) frequency band (FR2). 5G offers gigabit per second data rates.

5G networks use wider bandwidths, higher operating frequencies, and active antenna systems, such as phased array antennas.

The key challenges for 5G network deployment are characterizing air interface path loss, optimizing beam coverage, and mitigating interference issues.

Keysight’s 5G gNodeB (gNB) field test solution, based on the FieldFox microwave analyzer, provides a complete toolkit for radio frequency (RF) engineers and technicians to install and troubleshoot 5G networks.

This solution can verify hardware gNB performance, such as cable and antenna conditions, transmit power, control channel power, and RF spurious responses.

It can also verify signal quality over the air, including multipath synchronization signal information and coverage area path loss, as well as identify and troubleshoot interference issues.

Specifications
N9962B FieldFox Handheld Microwave Signal Analyzer
Features	Parameters
Maximum Frequency	50 GHz
SA Start Frequency	5 kHz
Dynamic Range	n/a
Output Power	n/a
Number of Built-In Ports	2 ports
Instrument Type	Spectrum Analyzer
Cable and Antenna Analyzer	No
Spectrum Analyzer	Yes - Standard
Vector Network Analyzer	No
Additional SA Based Features	Built-In Power Meter Extended Range Transmission Analysis (ERTA) Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements
System Features	Built-In DC Source GPS Receiver - Internal Only Remote Control Capability
Power Measurement Using USB Sensor	CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor
Standard Attenuator Range	n/a
Standard Attenuator Step	n/a
Maximum Dynamic Range 3rd Order @1 GHz	n/a
DANL @1 GHz	-163 dBm
Maximum Analysis Bandwidth	n/a
Phase Noise @1 GHz (1 MHz offset)	n/a
Phase Noise @1 GHz (10 kHz offset)	-117 dBc/Hz
Phase Noise @1 GHz (30 kHz offset)	n/a
Applications Available	Yes
Overall Amplitude Accuracy	n/a
Bandwidth Options	n/a
Frequency Options	n/a
Performance Level	n/a
Applications-Cellular	89600 VSA Software Over-The-Air LTE FDD and 5GTF
Applications-Digital Video	n/a
Applications-General Purpose	AM/FM Tune and Listen Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response
Applications-Wireless Connectivity	n/a
Handheld / Modular	Yes
Trace Update 100 MHz Span	25 Updates Per Second

Specifications
FieldFox Handheld Microwave Signal Analyzer
Model Overview
Model	Description	Frequency Range¹	Test Port Connectors
N9933B	4 GHz FieldFox signal analyzer	9 kHz to 4 GHz	Type-N (f)
N9934B	6.5 GHz FieldFox signal analyzer	9 kHz to 6.5 GHz	Type-N (f)
N9935B	9 GHz FieldFox signal analyzer	9 kHz to 9 GHz	Type-N (f)
N9936B	14 GHz FieldFox signal analyzer	9 kHz to 14 GHz	Type-N (f)
N9937B	18 GHz FieldFox signal analyzer	9 kHz to 18 GHz	Type-N (f)
N9938B	26.5 GHz FieldFox signal analyzer	9 kHz to 26.5 GHz	Type-N (f)²
N9960B	32 GHz FieldFox signal analyzer	9 kHz to 32 GHz	2.4 mm (m)
N9961B	44 GHz FieldFox signal analyzer	9 kHz to 44 GHz	2.4 mm (m)
N9962B	50 GHz FieldFox signal analyzer	9 kHz to 50 GHz	2.4 mm (m)
N9963B	54 GHz FieldFox signal analyzer	9 kHz to 54 GHz	1.8 mm (m)

Notes:

¹ Useable to 5 kHz.

² Order Option 100 for 3.5 mm (m) test port connectors. With N9938B-100, the spectrum analyzer is built with 3.5 mm test port connectors instead of the standard Type-N (f). Option 100 is a prerequisite for Option 320 for N9938B.