Anritsu MS2720T

Opción ID	Descripción
2000-1035-R	896 MHz to 941 MHz, SMA(m), 50 ohm (1/2 wave)
MS2720T-0007	Option 7, Secure Data Operation
MS2720T-0009	Option 9, Demodulation Hardware
MS2720T-0019	Option 19, High Accuracy Power Meter (Requires USB Power Sensor, sold separately)
MS2720T-0024	Option 24, IQ Waveform Capture (Requires Option 9)
MS2720T-0025	Option 25, Interference Analyzer (Option 31 is recommended)
MS2720T-0027	Option 27, Channel Scanner
MS2720T-0031	Option 31, GPS Receiver (Requires GPS Antenna, sold separately)
MS2720T-0089	Option 89, Zero Span IF Output
MS2720T-0090	Option 90, Gated Sweep
MS2720T-0098	Option 98, Standard Calibration
MS2720T-0099	Option 99, Premium Calibration
MS2720T-0431	Option 431, Coverage Mapping (Requires Option 31)
MS2720T-0444	Option 444, EMF Measurement (Requires Anritsu Isotropic Antenna, sold separately)
MS2720T-0509	Option 509, AM/FM/PM Measurements (Option 431 required for full functionality)
MS2720T-0709	Option 709, Frequency Range 9 kHz - 9 GHz
MS2720T-0709-ES312	3 Year Extended Service - Return to Anritsu Standard Calibration
MS2720T-0709-ES315	3 Year Extended Service - Return to Anritsu Premium Calibration
MS2720T-0709-ES510	5 Year Extended Service - Return to Anritsu Repair Only
MS2720T-0709-ES512	5 Year Extended Service - Return to Anritsu Standard Calibration
MS2720T-0709-ES513	5 Year Extended Service - Return to Anritsu Repair and Standard Calibration
MS2720T-0709-ES515	5 Year Extended Service - Return to Anritsu Premium Calibration
MS2720T-0709-ES516	5 Year Extended Service - Return to Anritsu Repair and Premium Calibration
MS2720T-0720	Option 720; Frequency Range 9 kHz to 20 GHz
MS2720T-0732	Option 732; Frequency Range 9 kHz - 32 GHz
MS2720T-0743	Option 743; Frequency Range 9 kHz to 43 GHz
MS2720T-0809	Option 809, 9 GHz Tracking Generator (Requires Option 709)
MS2720T-0820	20GHz tracking generator
MS2720T-0880	Option 880, GSM/GPRS/EDGE Measurements (Requires Option 9)
MS2720T-0881	Option 881, W-CDMA/HSPA+ Measurements (Requires Option 9, Option 31 recommended)
MS2720T-0882	Option 882, TD-SCDMA/HSPA+ Measurements (Requires Option 9, Option 31 required for full functionality)
MS2720T-0883	Option 883, LTE FDD/TDD Measurements (Requires Option 9, Option 31 required for full functionality)
MS2720T-0884	Option 884, CDMA/EV-DO Measurements (Requires Option 9, Option 31 required for full functionality)
MS2720T-0885	Option 885, WiMAX Fixed/Mobile Measurements (Requires Option 9, Option 31 required for full functionality)
MS2720T-0886	Option 886, 256-QAM Demodulation for LTE FDD/TDD Measurements (Requires Option 883)
MS2720T-0887	Option 887, NB-IoT Analyzer (Requires Option 9)

Atributo	Valor
High Frequency (range)	20GHz <= 50GHz
Low Frequency (range)	1kHz <= 100kHz
Form Factor	Handheld

Vista general del producto

he MS2720T Spectrum Master is a high performance handheld spectrum analyzer featuring over 30 analyzers in one to meet virtually every measurement need.

The 7th generation MS2720T features a touch screen, full-band tracking generators to 20 GHz, and best-in-class performance for dynamic range, DANL, phase noise, and sweep speed.

Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz

Anritsu's latest generation of handheld spectrum analyzers is the MS2720T Spectrum Master. This represents the company's highest performance handheld spectrum analyzer. Exciting new features and options bring more value and speed to the user.

Key Features

Frequency Ranges: 9 kHz to 9 GHz, 13 GHz, 20 GHz, 32 GHz and 43 GHz

Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Mask, Spurious Emissions, Field Strength

3G and 4G Measurement options for LTE (FDD & TDD), CDMA, W-CDMA, WiMAX, GSM, and

TD-SCDMA

Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping

Dynamic Range: > 106 dB in 1 Hz RBW @ 2.4 GHz

DANL: –164 dBm in 1 Hz RBW @ 1 GHz preamp On

Phase Noise: –112 dBc/Hz @ 10 kHz offset at 1 GHz

1 Hz to 10 MHz Resolution Bandwidth (RBW)

Tracking Generator up to 20 GHz

PIM Hunting

PIM Alert (a downloadable easyTest™ script)

Standard three-year warranty (battery one-year warranty)

Benefits

Broadband preamplifiers over the whole frequency range for increased sensitivity approximately 17 dB

Three Sweep Modes: improved sweep speed, up to 100 times faster

Resolution and Video Bandwidths from 1 Hz to 10 MHz

New triggering choices, including hysteresis, hold-off, and delay

More zero-span capabilities including 10 MHz RBW & VBW

Enhanced Spectrum Analyzer Touch Screen GUI, including large marker display choice

Choice of display options for readability: normal, black on white, night vision, color on white, or high contrast

On-screen Interference Mapping as part of the Interference Analysis option

LTE Measurements up to 20 MHz, plus support for Carrier Aggregation

30 MHz wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any wideband signal

Burst detect captures 200 μs bursts the first time, every time

PIM Hunting for finding external IM products

Features

High Accuracy Power Meter

PIM Hunting

Tracking Generator options to 20 GHz

Interference Analyzer

Channel Scanner

140 MHz Zero-Span IF Output, 30 MHz bandwidth

GPS Receiver:

- Increase Frequency Accuracy, Geo-Tag Data Collection

Secure Data Operation option

3GPP Signal Analyzers:

- LTE (TDD and FDD), GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSPA+

3GPP2 Signal Analyzers:

- CDMA and EV-DO

IEEE 802.16 Signal Analyzers:

- Fixed WiMAX and Mobile WiMAX

Specifications
MS2720T Spectrum Master
Features	Parameters
Frequency Range	9 kHz to 43 GHz
Dynamic Range	>106 dB in 1 Hz bandwidth at 2.4 GHz
Phase Noise	-112 dBc/Hz @ 10 kHz offset at 1 GHz
RF Connectors	N (f) for option 709, 713 and 720. Ruggedized K(m) for options 732 and 743
Input Attenuation	0 to 65 dB in 5 dB steps
Amplitude Accuracy	±0.5 dB typical
Frequency Accuracy	Aging: ± 1.0 ppm/10 years Accuracy: ± 0.3 ppm (25 °C ± 25°C) + aging

Specifications
MS2720T Spectrum Master
Options and Accessories
Model / Option	Description
MS2720T-0709	9 kHz – 9 GHz Spectrum Analyzer
MS2720T-0713	9 kHz – 13 GHz Spectrum Analyzer
MS2720T-0720	9 kHz – 20 GHz Spectrum Analyzer
MS2720T-0732	9 kHz – 32 GHz Spectrum Analyzer
MS2720T-0743	9 kHz – 43 GHz Spectrum Analyzer
MS2720T-0809	100 kHz – 9 GHz Tracking Generator (only with Option 709)
MS2720T-0813	100 kHz – 13 GHz Tracking Generator (only with Option 713)
MS2720T-0820	100 kHz – 20 GHz Tracking Generator (only with Option 720)
MS2720T-0007	Secure Data Operation
MS2720T-0009	RF and Demodulation Hardware
MS2720T-0019	High-Accuracy Power Meter (utilizes USB Power Sensor)
MS2720T-0024	I/Q Waveform Capture (requires Option 9)
MS2720T-0031	GPS Receiver (requires GPS Antenna PN 2000-1528-R, 2000-1652-R or 2000-1760-R, sold separately)
MS2720T-0025	Interference Analyzer (Option 0031 strongly recommended because it is required for interference mapping)
MS2720T-0027	Channel Scanner
MS2720T-0089	Zero-Span IF Output
MS2720T-0090	Gated Sweep
MS2720T-0431	Coverage Mapping (requires Option 31)
MS2720T-0444	EMF Measurement System
MS2720T-0509	AM/FM/PM Analyzer
MS2720T-0880	GSM/GPRS/EDGE RF Measurements (requires Option 9, Option 31 recommended)
MS2720T-0881	W-CDMA/HSPA+ Measurements (requires Option 9, Option 31 recommended)
MS2720T-0882	TD-SCDMA/HSPA+ Measurements (requires Option 9, Option 31 recommended)
MS2720T-0883	LTE (FDD and TDD) Measurements (requires Option 9, Option 31 recommended)
MS2720T-0886	256 QAM Demodulation for LTE Measurements (requires Option 883)
MS2720T-0887	NB-IoT Analyzer (requires Option 9)
MS2720T-0884	CDMA2000 1X & EV-DO Measurements (requires Option 9, Option 31 recommended)
MS2720T-0885	WiMAX Fixed/Mobile Measurements (requires Option 9, Option 31 recommended)
MS2720T-0098	Standard Calibration (ANSI Z540-1-1994)
MS2720T-0099	Premium Calibration (ANSI Z540-1-1994 plus test data)