配置型号包含以下属性:
Oscilloscope Probes10MHz <= 100MHz属性 | 价值 |
---|---|
High Frequency (range) | 10MHz <= 100MHz |
Passive voltage probes ship standard with most oscilloscopes and provide a low cost, general purpose probing solution. Generally, these probes lack the performance of an active voltage probe but provide the ruggedness and wide dynamic range suitable for visualizing signals over a broad range of applications.
The P6101B and P3010 probes are designed to complement the Tektronix family of portable DSO and ART instruments.
The P6101B, and P3010 probes are designed to complement the Tektronix family of portable DSO and ART instruments. The core of each probe's performance is supplied by a Tektronix HYBRID/SMT device.
Key Features |
1 MΩ inputs |
P6101B: 1X, 15 MHz, 300 V CAT II Readout |
P3010: 10X, 100 MHz |
Molded passive voltage probes |
Single-piece, molded rubber body |
Lightweight ergonomic design |
10-times improvement in durability |
HYBRID/SMT circuitry on multi-layer circuit board for improved performance and reliability |
New stronger, replaceable probe tip |
Safety certification: UL3111-2-031, CSA1010.2.031, EN61010-2-031, IEC61010-2-031 |
UL3111-2-031, CSA1010.2.031, EN61010-2-031, IEC61010-2-031 |
1-year unconditional guarantee |
Miniature probe tip compatible with a wide range of Tektronix accessories and adapters |
Mixture of high, medium, and low-frequency general-purpose relative measurements: Engineering and Design Service Manufacturing |
Specifications | ||
P3010 P6101B Passive Voltage Probes | ||
Model | P6101B | P3010 |
Attenuation | 1X | 10X |
Bandwidth | 15 MHz | 100 MHz |
Comp. Range (Typical) | N.A. | 10 pF to 15 pF |
System Input resistance | 1 MΩ | 10 MΩ |
Input Capacitance (Typical) | 100 pF | 13 pF |
Input RMS | 300 Vʀмѕ CAT II | 300 Vʀмѕ CAT I & II ¹ 150 Vʀмѕ CAT III ² |
Readout | X |
Note:
¹ 500 V peak, duty factor
² 250 V peak, duty factor
Specifications | |
P3010 P6101B Passive Voltage Probes | |
Model Overview | |
Model | Description |
P6101B | 1X, 15 MHz Passive Voltage Probe. |
P3010 | 10X, 100 MHz Passive Voltage Probe |
Specifications | ||||
Passive Probe | ||||
Model Overview | ||||
Model | Attenuation | Bandwidth | Input Impedance | Maximum Voltage |
TPP0051 | 10x | 50 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
TPP0101 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
TPP0100 | 10X | 100 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
TPP0201 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
TPP0200 | 10X | 200 MHz | 10 MΩ || 12 pF | 300 Vrms CAT II |
P2220 | 1X / 10X | 10X: 200 MHz 1X: 6 MHz | 10X: 10MOhm|| 17pF 1X: 1MOhm|| 110pF | 10X: 300 Vrms CAT II 1X: 150 Vrms CAT II |
P2221 | 1X / 10X | 10X: 200 MHz 1X: 6 MHz | 10X: 10 MΩ || 110 pF 1X: 1 MΩ || 17 pF | 10X: 300 Vrms CAT II 1X: 150 Vrms CAT II |
P3010 | 10X | 100 MHz | 10 MΩ || 13 pF | 300 Vrms CAT II |
P6101B | 1X | 15 MHz | 1 MΩ || 100 pF | 300 Vrms CAT II |
TPP0250 | 10X | 250 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
TPP0500B | 10X | 500 MHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |
TPP0502 | 2X | 500 MHz | 2 MΩ || 12.7 pF | 300 Vrms CAT II |
P5050B | 10X | 500 MHz | 10 MΩ || 11 pF | 300 Vrms CAT II |
P6139B | 10X | 500 MHz | 10 MΩ || 8 pF | 300 Vrms CAT II |
TPP1000 | 10X | 1 GHz | 10 MΩ || 3.9 pF | 300 Vrms CAT II |