The Network & Service Companion (NSC-200) allows techs and contractors to validate both network and service layers up to 10G before sharing their test results with customers and providers.
Simplify the closeout test process and analysis for both inexperienced and expert techs with one-button, one-screen result tests, all run under 1 minute.
Prevent customer complaints or find the root cause of issues by testing at every access point (GPON, XGSPON, Ethernet, WiFi) for a clear and fast demarcation.
Optimize WiFi coverage and performance; educate end users with simple room-by-room analysis. Get network improvement recommendations when performance is below expectation.
Specifications
GPON (Optional)
ONU/ONT
VIAVI GPON SFP
Interface
SC/APC
Standard
G.984.2 GPON compliant
G.988 OMCI compliant
Upstream (1310 nm) Tx Signal Power Range
0.5 dBm to 5.0 dBm
Downstream (1490 nm) Rx Signal Power Range
-28.0 dBm to -8.0 dBm
Test Results
PON Activation State, Power Level values from the SFP,
PON ID, ODN Class – according to ITU-T G.984
and G.988 standards
XGSPON (Optional)
ONU/ONT
VIAVI XGSPON SFP
Interface
SC/APC
Standard
G.9807.1 XGSPON compliant
G.988 OMCI compliant
Upstream (1270 nm) Tx Signal Power Range
4.0 dBm to 9.0 dBm
Downstream (1577 nm) Rx Signal Power Range
-28.0 dBm to -9.0 dBm
Test Results
PON Activation State, Power Level values from the SFP,
PON ID, ODN Class – according to ITU-T G.9807
and G.988 standards
Ethernet (Optional)
Standard
IEEE 802.3
10M, 100M, 1G, 2.5G, 5G, and 10G Ethernet
Test Results
Ethernet Frames, IP Connectivity, Ping, Traceroute, Web
Connectivity, Speed Test up to 10 Gbps
TWAMP Reflector (Optional)
10M, 100M, and 1G Ethernet
TWAMP Light Reflector support
Port/L2/L3 Loopback (Optional)
10M, 100M, 1G, and 10G Ethernet
Port Loopback and Source specific VIAVI Loopback support
WiFi (Optional)
Test Results
WiFi Expert
(Passive Mode)
Up to WiFi 6 (802.11 a/b/g/n/ac/ax)
• Signal strength (RSSI), Channel, Standard, Width, Channel
Noise, Total Airtime, Noise Airtime, Estimated Throughput,
Recommendations
OneCheck WiFi
(Connected Mode)
Up to WiFi 5 3x3 (802.11 a/b/g/n/ac)
• Signal strength (RSSI), Standard, Width, Max Router PHY
Rate, IP/Web connectivity, Throughput Tests