You are browsing the BE_NL site. Would you like to be redirected to another country or region to see content and products specific to your location?

Snelle Offerte: Rohde & Schwarz ZNA26 (1332.4500.24)

Rohde & Schwarz ZNA26 (1332.4500.24)

Vector Network Analyzer; 4 Port, 3.5 mm Connector, 10 MHz to 26.5 GHz
Model
ZNA26 (1332.4500.24)
Productgroep
RF & Microwave Network Analyzers
Fabrikant
Rohde & Schwarz

Geconfigureerde modellen bevatten de volgende opties:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz3.5mm-Male (Jack)Benchtop
Configuraties
Belangrijke specificaties
Productoverzicht
Hulpbronnen

Kies uw configuratie

Show:

Beschikbare opties voor Rohde & Schwarz ZNA26 (1332.4500.24)

Optie-IDBeschrijving
Precision frequency reference for R&S®ZNA (Hardware option)
2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)
Additional removable SSD
Direct IF access for R&S®ZNA (Hardware option)
Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Spectrum analyzer mode for R&S®ZNA (software license)
Time domain analysis (TDR) for R&S®ZNA (software license)
Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)
Vector corrected converter measurements (without reference mixer and phase reference) for R&S®ZNA requires R&S®ZNA-K4 (software license)
Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)
Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)
Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
1 mHz frequency resolution for R&S®ZNA (software license)
Extended time domain analysis incl. eye diagram for R&S®ZNA requires R&S®ZNA-K2 (software license)
Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)
In-Situ De-embedding (ISD) IEEE 370
3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)
Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Direct source monitor access for port 1 and port 3 before the source step attenuator for R&S ZNA26 (4 ports) requires R&S ZNA26-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)
Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)
Internal combiner for port 1 and port 3 for R&S®ZNA26 (4 ports). Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3. Upgrade / retrofit by R&S service Memmingen only. (Hardware option. Requires R&S®ZNA26-B21 and R&S®ZNA26-B23)
Low noise pre-amplifier receiver port 2
Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S ZNA26-B31, recommended: R&S ZNA26-B16, R&S ZNA26-B161, R&S ZNA26-B21)

Toont 1 - 6 van 12 resultaten

1
2
1

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-250366

ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

2

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-558728

ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)ZNA-K30 (1332.5465.02) • Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

3

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-558729

ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K9 (1332.5394.02) • Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

4

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-549307

ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-B43 (1332.4775.43) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

5

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-549304

ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B24 (1332.4630.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA26-B33 (1332.4700.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

6

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

Product-ID: P-549305

ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-B43 (1332.4775.43) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

Toont 1 - 6 van 12 resultaten

1
2
* Prijzen en beschikbaarheid kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle prijzen kunnen variëren als gevolg van verzendvoorwaarden, btw of omzetbelasting, invoerrechten en wisselkoersen. Producten zijn mogelijk niet op alle locaties beschikbaar. Alle vermelde besparingen zijn gebaseerd op de volledige catalogusprijs van nieuwe instrumenten; werkelijke besparingen kunnen variëren op basis van optie (s), configuratie, wisselkoersen en andere factoren. Garantie kan variëren per categorie of specifiek beschikbaar product. Alle voorwaarden worden bevestigd door volledige schriftelijke offerte.

Kunt u niet vinden wat u zoekt?

Contact opnemen
Kunt u niet vinden wat u zoekt?
loader
loader logo