You are browsing the BE_NL site. Would you like to be redirected to another country or region to see content and products specific to your location?

Rohde & Schwarz ZNA26 (1332.4500.22)

Vector Network Analyzer; 2 Port, 3.5 mm (m) Connectors, 10 MHz to 26.5 GHz
Model
ZNA26 (1332.4500.22)
Productgroep
RF & Microwave Network Analyzers
Fabrikant
Rohde & Schwarz

Geconfigureerde modellen bevatten de volgende opties:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz3.5mm-Male (Jack)Benchtop
Configuraties
Belangrijke specificaties
Productoverzicht
Hulpbronnen

Kies uw configuratie

Show:

Beschikbare opties voor Rohde & Schwarz ZNA26 (1332.4500.22)

Optie-IDBeschrijving
mmWave converter LO, 10 MHz to 26.5 GHz, for R&S ZNA Enables mmWave converter setups utilizing a R&S ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S ZNA-B26, Direct IF access, or R&S ZNA-B5, 2nd inte
Direct IF access for R&S ZNA (Hardware option)
mmWave converter support for R&S ZNA, R&S ZVA-Zxxx, R&S ZCxxx (software license)
Precision frequency reference for R&S®ZNA (Hardware option)
Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
Direct source and receiver access for R&S®ZNA26 (2 ports) Installation ex factory only (Hardware option)
Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Direct IF access for R&S®ZNA (Hardware option)
Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)
Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)
Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Low noise pre-amplifier receiver port 2
Low power spurious reduction, Port 1
Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
19 inch adapter BW2010, cabinet 6HU 1/1

Toont 1 - 3 van 3 resultaten

1

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product-ID: P-248448

ZNA26-B16 (1332.4581.22) • Direct source and receiver access for R&S®ZNA26 (2 ports) Installation ex factory only (Hardware option)ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA26-B501 (1332.5220.11) • Low power spurious reduction, Port 1ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

2

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product-ID: P-558555

ZNA-K8 (1332.5388.02) • mmWave converter support for R&S ZNA, R&S ZVA-Zxxx, R&S ZCxxx (software license)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S ZNA Enables mmWave converter setups utilizing a R&S ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S ZNA-B26, Direct IF access, or R&S ZNA-B5, 2nd inteZNA-B26 (1332.4598.02) • Direct IF access for R&S ZNA (Hardware option)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

3

Vector Network Analyzer, 2 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors.

Product-ID: P-411674

ZNA26-B91 (11332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-K7 (1332.5371.02) • Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)ZNA26-K17 (1332.5459.02) • Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)ZZA-KN6 (1175.3056.00) • 19 inch adapter BW2010, cabinet 6HU 1/1ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
Huren

Bevestigd bij offerte

Offerte

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

Financiele Oplossingen

Vraag nu om meer informatie

Toont 1 - 3 van 3 resultaten

* Prijzen en beschikbaarheid kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle prijzen kunnen variëren als gevolg van verzendvoorwaarden, btw of omzetbelasting, invoerrechten en wisselkoersen. Producten zijn mogelijk niet op alle locaties beschikbaar. Alle vermelde besparingen zijn gebaseerd op de volledige catalogusprijs van nieuwe instrumenten; werkelijke besparingen kunnen variëren op basis van optie (s), configuratie, wisselkoersen en andere factoren. Garantie kan variëren per categorie of specifiek beschikbaar product. Alle voorwaarden worden bevestigd door volledige schriftelijke offerte.

Kunt u niet vinden wat u zoekt?

Contact opnemen
Kunt u niet vinden wat u zoekt?
loader
loader logo