The Model 175S1G4A is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Push-pull circuitry is utilized in all high power stages in the interest of lowering distortion and improving stability.
Specifications:
RATED POWER OUTPUT: 175 watts minimum
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
POWER OUTPUT @ 3dB COMPRESSSION:
- Nominal: 190 watts; Minimum: 160 watts
POWER OUTPUT @ 1dB COMPRESSION:
- Nominal:165 watts; Minimum:135 watts
FLATNESS: 1.5 dB typical; 2.0 dB maximum
FREQUENCY RESPONSE: 0.7-4.2GHz instantaneously
GAIN (at maximum setting): 52.5dB minimum
GAIN ADJUSTMENT: (Continuous Range), 15dB minimum, (4096 steps remote)
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
RF POWER DISPLAY: 0200 Watts
OUTPUT IMPEDANCE: 50 ohms, nominal
MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load impedance.
MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
THIRD ORDER INTERCEPT: 61dBm typical
HARMONIC DISTORTION: Minus 20dBc, maximum at 160 watts
SPURIOUS: Minus 73dBc typical.
PHASE LINEARITY: 1.0 deg/100 MHz, Typ
PRIMARY POWER (Selected Automatically):
90-132, 180-264 VAC, 50/60Hz, single phase, 1050 watts maximum
CONNECTORS: RF See Model Configurations
REMOTE INTERFACES
- IEEE-488: 24 pin
- RS-232: 9 pin Subminiature D
- RS-232 (fiber optic): Type ST
- USB 2.0: Type B
- Ethernet: RJ-45