Configured models contain the following attributes:
RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz50GHz <= 85GHz1MHz <= 10MHzBenchtopOption | Description |
---|---|
Windows 7 OS | |
Cable set for option ZVA-K9. (4-port ZVA40 (2.4mm), ZVA50, ZVA67. Requires ZVAxx-B16) | |
Option: Mixer- and frequency converting measurements for ZVA and ZVT (software license) | |
Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) (software license) | |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports (software license) | |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth for all ZVA and ZVT (software license). includes ZVA-K17 (1164.1070.02) | |
Control of frequency converters (for ZVA with f>20 GHz, ZVT20, includes ZVA-K4) (software license) | |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required. 4-port ZVA or ZVT with 3 or more test ports recommended) (software license) | |
Increases the receiver bandwidth to 5MHz (software license) | |
Two internal pulse generators (for ZVA and ZVT) (software license) | |
Noise figure measurements on frequency converting DUTs, for R&S®ZVA and R&S®ZVT, R&S®ZVA-K4 and R&S®ZVA-K30 required (software license) | |
Direct generator-receiver-access (for 4 port ZVA67) | |
Generator Step Attenuator Port 1, mechanical, 50dB in 10dB steps | |
Generator Step Attenuator Port 2, mechanical, 50dB in 10dB steps | |
Generator Step Attenuator Port 3, mechanical, 50dB in 10dB steps | |
Generator Step Attenuator Port 4, mechanical, 50dB in 10dB steps | |
Receiver Step Attenuator Port 1, mechanical, 35dB in 5dB steps | |
Receiver Step Attenuator Port 2, mechanical, 35dB in 5dB steps | |
Receiver Step Attenuator Port 3, mechanical, 35dB in 5dB steps | |
Receiver Step Attenuator Port 4, mechanical, 35dB in 5dB steps | |
Option: Oven quartz (OCXO) for ZVA, ZVB, ZVT | |
Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 (factory installed only) | |
Additional removable Flash Disk 4GB for ZVA/ZVB with controller FMR7 with firmware for ZVA/ZVB Option ZVAB-B18 required | |
USB-IEC/IEEE Adapter and driver-SW (USB-Stick) for control of external generators | |
Time domain (for ZVA, ZVB, ZVT) (software license) | |
Noise figure measurement on 2 port devices (for ZVA and ZVT, option ZVA-K17(5MHz bandwidth)included, generator step attenuator option strongly recommended) (software license) |
Showing 1 - 3 of 3 results
Product ID: P-219638
Availability confirmed on quote
Quote
Product available under Certified Pre-Owned Program.
Find out moreAvailability confirmed on quote1
$311,209.00*$471,405.00
This product may be available by an alternative finance solution.
Product ID: P-219635
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-219639
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Showing 1 - 3 of 3 results
How do I select a configuration?
You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.
What’s the difference between Quote and Buy?
You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.
Can I add extra items or make special requests?
Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.