Configured models contain the following attributes:
RF & Microwave Network AnalyzersNetwork Analyzers <20GHz1GHz <= 10GHz100kHz <= 1MHzOption | Description |
---|---|
Option: Mixer- and frequency converting measurements for ZVA and ZVT (software license) | |
Vector corrected mixer measurements (for R&S®ZVA, R&S®ZVT; R&S®ZVA/T-B16 and R&S®ZVA-K4 required) (software license) | |
True Differential Measurements for all 4-port ZVA and for ZVT with at least 3 ports (software license) | |
Measurements on pulsed signals pulse profile, recording time up to 3ms up to 30 MHz bandwidth for all ZVA and ZVT (software license). includes ZVA-K17 (1164.1070.02) | |
Measurement of group delay on frequency converters without LO access (for ZVA, ZVT; ZVA/T-B16 and ZVA-K4 required. 4-port ZVA or ZVT with 3 or more test ports recommended) (software license) | |
Direct generator/receiver access for 4-port ZVA8 | |
Generator attenuator port 1 mechanical, 70 dB in 10-dB-steps, 8 GHz | |
Generator attenuator port 2 mechanical, 70 dB in 10-dB-steps 8 GHz | |
Generator attenuator port 3 mechanical, 70 dB in 10-dB-steps, 8 GHz | |
Generator attenuator port 4 mechanical, 70 dB in 10-dB-steps 8 GHz | |
Receiver attenuator port 1 mechanical, 35 dB in 5-dB-steps 8 GHz | |
Receiver attenuator port 2 mechanical, 35 dB in 5-dB-steps 8 GHz | |
Receiver attenuator port 3 mechanical, 35 dB in 5-dB-steps 8 GHz | |
Receiver attenuator port 4 mechanical, 35 dB in 5-dB-steps 8 GHz | |
Option: Oven quartz (OCXO) for ZVA, ZVB, ZVT | |
Removable Flash Disk 4GB for ZVA/ZVB with controller unit FMR7/3 or FMR7/6 (factory installed only) | |
Removable hard disk 500 GB (including firmware) for R&S®ZVA/ZVB with FMR7, FMR9, FMR11 factory installed only (hardware option) | |
USB-IEC/IEEE Adapter and driver-SW (USB-Stick) for control of external generators | |
Time domain (for ZVA, ZVB, ZVT) (software license) |
Showing 1 - 1 of 1 results
Product ID: P-219723
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Showing 1 - 1 of 1 results
How do I select a configuration?
You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.
What’s the difference between Quote and Buy?
You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.
Can I add extra items or make special requests?
Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.