Available to Buy Online
View Configurations
Configured models contain the following attributes:
Oscilloscope Probes10MHz <= 100MHzPlease use 'Get Quick Quote' or ‘Configure Unit’ and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Attribute | Value |
---|---|
High Frequency (range) | 10MHz <= 100MHz |
The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (w/ TCA-BNC), or TekVPI (w/ TPA-BNC) interfaces, current measurements and calculations are simple and easy.
The TCPA300 amplifier, when used with TCP312A, TCP305A, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and 150 A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.
Higher-frequency performance is available with the TCP312A w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.
Key Performance Specifications:
AC/DC measurement capabilities
*Derated with duty cycle
Key Features:
**Requires a TDS TEKSCOPE oscilloscope or a TekConnect oscilloscope with TCA-BNC adapter
Applications:
Specifications | ||||
Model Overview | ||||
Model | TCP312A w/ TCPA300 | TCP305A w/ TCPA300 | TCP303 w/ TCPA300 | TCP404XL w/ TCPA400 |
Bandwidth | DC – 100 MHz | DC – 50 MHz | DC – 15 MHz | DC – 2 MHz |
Rise Time | ≤3.5 ns | ≤7 ns | ≤23 ns | ≤175 ns |
DC Accuracy | ±3% of reading | ±3% of reading | ±3% of reading | ±3% of reading |
Accuracy, Typical | DC: ±1% of reading DC to 60 Hz, ≤5 A: ±1% 60 Hz – 5 kHz, ≤5 A: ±1.5% DC – 5 kHz, >5 A: ±1.5% | DC: ±1% of reading DC to 60 Hz, ≤5 A: ±1% 60 Hz – 5 kHz, ≤5 A: ±1.5% DC – 5 kHz, >5 A: ±1.5% | DC: ±1% of reading | DC: ±1% of reading |
Lowest measurable current (at ±3% accuracy at DC) Scope set to 1 mV/div and 20 MHz BW limited | 1 mA | 5 mA | 5 mA | 1 A |
Maximum Amp-Second product, typical (based on amplifier range setting) | 50 A*μS – 1 A/V 500 A*μS – 10 A/V | 500 A*μS – 5 A/V NA – 10 A/V | 3,000 A*μS – 5 A/V 15,000 A*μS – 50 A/V | NA – 1 A/mV |
Maximum Wire Voltage | ||||
Bare | 150 V CAT II | 150 V CAT II | 600 V CAT I & II | 600 V CAT I & II |
Insulated | 300 V CAT II | 300 V CAT II | 300 V CAT III | 300 V CAT III |
AC-coupling low-Frequency Bandwidth, typical (Low pass – 3 dB point) | <7 Hz | <7 Hz | <7 Hz | <7 Hz |
Displayed RMS Noise, typical (at 20 MHz Bandwidth limit) | ≤250 μARMS | ≤1.25 mA RMS | ≤2.5 mARMS | ≤250 mARMS |
Signal Delay (to output BNC) | 17 ns | 19 ns | 40 ns | 80 ns |
Insertion Impedance | 0.11 Ω at 1 MHz 0.12 Ω at 10 MHz 0.35 Ω at 50 MHz 0.7 Ω at 100 MHz | 0.02 Ω at 1 MHz 0.1 Ω at 10 MHz 0.35 Ω at 50 MHz | 0.01 Ω at 1 MHz 0.025 Ω at 5 MHz 0.1 Ω at 15 MHz | 0.1 m Ω at 10 kHz 0.6 m Ω at 100 kHz 8 m Ω at 1 MHz 16 m Ω at 2 MHz |