Keysight InfiniiVision HD3 Series Oscilloscopes

4x the resolution, ½ the noise floor in a portable oscilloscope

Meet the New Keysight InfiniiVision HD3 Series Oscilloscopes

Perform digital debugging using a portable oscilloscope with a custom application-specific integrated circuit (ASIC) that delivers four times more vertical resolution and half the injected noise of other general-purpose oscilloscopes. Troubleshoot your design and ensure product quality by debugging with an oscilloscope that can see the small signals beyond the noise to catch the slightest and most infrequent signal glitches.

Keysight Technologies HD304MSO

InfiniiVision 300 HD-Series Mixed Signal Oscilloscope, 4+16 Channel

Keysight Technologies HD302MSO

InfiniiVision 300 HD-Series Mixed Signal Oscilloscope

Keysight Technologies HD3WAVEGEN

WaveGen 100 MHz Arbitrary Waveform Generator for InfiniiVision 300 HD-Series

Keysight Technologies HD3SECURE

Enhanced Security for InfiniiVision 300 HD-Series

Highlights

Increase vertical resolution by four times with a 14-bit analog-to-digital converter (ADC).
See smaller signals with a 50 µV_RMS noise floor.
Identify infrequent signal glitches with an uncompromised 1.3M waveform / second update rate enabled by a custom ASIC.
Capture and analyze more signals at once with 100 Mpts of deep memory.
Display up to four independent signals and control the scaling individually.
Isolate signals in seconds with zone triggering — simply draw a box with your finger on the screen.
Characterize signals, hunt for errors, and save automatically with Keysight Fault Hunter.
Perform advanced analysis with fast Fourier transforms (FFTs), mask testing, histograms, and Bode plots.

Debug Designs with 4x the Resolution, 1/2 the Noise Floor

7-in-1 Instrument

The HD3 is more than an oscilloscope. This solution helps you save valuable bench space, providing more capabilities in the same footprint by enabling additional instrument integration: Oscilloscope with two or four analog channels, mixed-signal oscilloscope to add 16 digital channels, protocol analyzer, frequency response analyzer, 100-MHz arbitrary waveform generator, three-digit digital voltmeter, and Eight-digit counter with totalizer

14-bit ADC Delivering Four Times the Resolution

A key component in achieving high vertical accuracy is the ADC. The ADC converts the analog signal into a digital format that the oscilloscope can display. The number of bits in the ADC determines the resolution of this conversion. A higher number of ADC bits means more vertical resolution, translating to more accurate signal representation.

Capture Smaller Signals with a 50 µVRMS Noise Floor

All electronic devices, including oscilloscopes, generate some level of noise. However, the goal is to minimize the noise as much as possible. A lower noise floor means that the oscilloscope has less impact on the signal, resulting in more accurate measurements. The HD3 has a 50 µVRMS low noise floor at full 1 GHz bandwidth, two to five times less noise than other general-purpose oscilloscopes. You can further reduce the noise with bandwidth limiting and waveform averaging options on the HD3.

7-in-1 Instrument

The HD3 is more than an oscilloscope. This solution helps you save valuable bench space, providing more capabilities in the same footprint by enabling additional instrument integration: Oscilloscope with two or four analog channels, mixed-signal oscilloscope to add 16 digital channels, protocol analyzer, frequency response analyzer, 100-MHz arbitrary waveform generator, three-digit digital voltmeter, and Eight-digit counter with totalizer

Capture Smaller Signals with a 50 µVRMS Noise Floor

All electronic devices, including oscilloscopes, generate some level of noise. However, the goal is to minimize the noise as much as possible. A lower noise floor means that the oscilloscope has less impact on the signal, resulting in more accurate measurements. The HD3 has a 50 µVRMS low noise floor at full 1 GHz bandwidth, two to five times less noise than other general-purpose oscilloscopes. You can further reduce the noise with bandwidth limiting and waveform averaging options on the HD3.

7-in-1 Instrument

The HD3 is more than an oscilloscope. This solution helps you save valuable bench space, providing more capabilities in the same footprint by enabling additional instrument integration: Oscilloscope with two or four analog channels, mixed-signal oscilloscope to add 16 digital channels, protocol analyzer, frequency response analyzer, 100-MHz arbitrary waveform generator, three-digit digital voltmeter, and Eight-digit counter with totalizer

Key Specs

Channels	Bandwidth	ADC	Noise Floor	Max Memory Depth
2 or 4 analog + 16 digital	200 MHz to 1 GHz	14 bits	50 µVRMS	100M points

Limited-Time Promotion

Maximize Your Memory on a New HD3 Series Oscilloscope

The HD3 series features custom components optimized for oscilloscope measurements, including a new deep memory architecture. This deep memory allows you to capture longer time spans at full sample rates for better measurement and analysis results. For a limited time, you can maximize the memory depth on your new HD3 series oscilloscope (100 MPts/channel) for FREE!

VIEW OFFER