The Keysight N4693D microwave electronic calibration (ECal) module makes calibration of Keysight vector network analyzers fast, easy, and accurate. The N4693D is a precision 2-port ECal module that supports 2.4 mm connectors up to 50 GHz. Select either female-female, male-male, or female-male connectors. The plastic storage case for the N4693D is included for securing your ECal module and accessories.
The N4693D Option 0DC extends the calibration frequency range down to DC, which is beneficial for broadband device modeling or time domain and signal integrity analysis using enhanced time domain-analysis on the Keysight network analyzers.
This ECal module is an ideal solution for calibrating vector network analyzers. Performing a full two-port calibration takes less than half the time and number of connections versus traditional mechanical cal kits. The operator simply connects the ECal module to the vector network analyzer via USB and the firmware controls the rest, thus reducing the chance for operator error. Wear and tear on connectors is reduced as well, lowering repair costs on both the test port connectors and calibration standards.
| Key Features |
| Precision 2-port microwave ECal module with high accuracy |
| Frequency coverage from 10 MHz to 50 GHz or DC to 50 GHz (Option 0DC) |
| Fast, easy, and accurate full two-port calibration |
| Supports 2.4 mm connectors |
| Available in male/male, female/female, and male/female connector configurations |
| Direct control from Keysight vector network analyzers via USB |
| Specifications |
|
| Keysight Electronic Calibration (ECal) Module |
|
| Model Overview |
|
| Model | Description |
| N755xA Series 2-port Economy ECal Modules |
|
| N7550A | DC to 4 GHz |
| N7551A | DC to 6.5 GHz |
| N7552A | DC to 9 GHz |
| N7553A | DC to 14 GHz |
| N7554A | DC to 18 GHz |
| N7555A | DC to 26.5 GHz |
| 8509xC Series 2-port RF ECal Modules |
|
| 85091C | 300 kHz to 9 GHz |
| 85092C | 300 kHz to 9 GHz |
| 85093C | 300 kHz to 9 GHz |
| 85096C | 300 kHz to 3 GHz |
| 85098C | 300 kHz to 7.5 GHz |
| 85099C | 300 kHz to 3 GHz |
| N469xD Series 2-port Microwave ECal Modules |
|
| N4690D | DC / 300 kHz to 18 GHz |
| N4691D | DC / 300 kHz to 26.5 GHz |
| N4692D | DC / 10 MHz to 40 GHz |
| N4693D | DC / 10 MHz to 50 GHz |
| N4694D | DC / 10 MHz to 67 GHz |
| N4696D | DC / 300 kHz to 18 GHz |
| N443xA/B Series 4-port ECal Modules |
|
| N4431B | 9 kHz to 13.5 GHz |
| N4432A | 300 kHz to 18 GHz |
| N4433A | 300 kHz to 20 GHz |
| N443xD Series 4-port Ecal Modules |
|
| N4431D | DC to 13.5 GHz |
| N4432D | DC/300 KHz to 18 GHz |
| N4433D | DC/300 KHz to 26.5 GHz |
| Specifications |
|
| RF Electronic Calibration Module (ECal) |
|
| Options and Accessories |
|
| Part Number | Description |
| N4693D-00A | Add 2.4 mm adapters |
| N4693D-0DC | DC to 50 GHz |
| N4693D-100 | 10 MHz to 50 GHz |
| N4693D-1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) |
| N4693D-A6J | ANSI Z540-1-1994 Calibration |
| N4693D-F0F | Both connectors female |
| N4693D-M0F | One male connector and one female connector |
| N4693D-M0M | Both connectors male |
| N4693D-UK6 | Commercial calibration certificate with test data |
