Products Manufacturers Services Solutions Resources Promotions About Us

Quick quote: Fluke 753

+44 (0)20 84 200 200Need help? Talk to our experts.

Fluke 753

Documenting Process Calibrator

Model

753

Product Family

Multimeter

Manufacturer

Fluke

Configured models contain the following attributes:

MultimeterData AcquisitionCounters & Function GeneratorsDigital Multimeters

Configurations

Key Specs

Product Overview

Resources

Let us help you with your exact configuration

Please use 'Get Quick Quote' and we’ll contact you and quote for your exact need.

You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.

Product Overview

The Fluke 753 is a powerful multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software, and upload data for printing, archiving, and analysis. You'll find it does the work of several tools, with simultaneous source and measurement capabilities for all common process parameters. It sources, simulates, and measures pressure, temperature, and electrical signals in one rugged, hand-held calibration tool. It also automates calibration procedures, captures data for documentation, and helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations.

The 753 includes a USB interface and a USB communication cable to enable two-way communication with DPCTrack2 and other instrumentation management applications. To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.

Key Features

Measures and sources pressure using any of 50 Fluke 700Pxx Pressure Modules

Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results

Holds up to a full week of downloaded procedures and calibration results

Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more.

Offers compatibility with DPCTrack2 and many other asset management software packages

Bright white dual display for reading both sourced and measured parameters simultaneously

Easy-to-use multi-lingual interface

Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use

Comes with three-year warranty and DPC/Track trial software

Specifications
FLUKE-753 EU Documenting Process Calibrator
Model Overview
Model	FLUKE-753 EU
Data log functions	Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute)
Ramp functions	Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current)
Loop power function	Voltage: Selectable, 26 V Accuracy: 10%, 18 V minimum at 22 mA Maximum current: 25 mA, short circuit protected Maximum input voltage: 50 V DC
Step functions	Source functions: Voltage, current, resistance, frequency, temperature Manual step: Selectable step, change with arrow buttons Autostep: Fully programmable for function, start delay, stepvalue, time per step, repeat
Operating temperature	-10°C to +50°C
Storage temperature	-20°C to +60°C
Dust/water resistance	Meets IP52, IEC 529
Operating altitude	3000 m above mean sea level (9842 ft)
Size	136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in)
Weight	1.2 kg (2.7 lb)
Batteries	Internal Battery Pack Li-ion: 7.2 V, 4400 mAh, 30 Wh
Battery life	> 8 hours typical
Battery replacement	Via snap-shut door without opening calibrator; no tools required
Side port connections	Pressure module connector USB Connector to interface to your PC Connection for optional battery charger/eliminator
Data storage capacity	1 week of calibration procedures results
90 day specifications	The standard specification interval for the 750 Series are 1 and 2 years. Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant.
Agency approvals	CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993

Measurement Accuracy

Voltage

Range /Resolution

100.000 mV

3.00000 V

30.0000 V

300.00 V

1 Year

0.02% + 0.005 mV

0.02% + 0.00005 V

0.02% + 0.0005 V

0.05% + 0.05 V

2 Years

0.03% + 0.005 mV

0.03% + 0.00005 V

0.03% + 0.0005 V

0.07% + 0.05 V

Voltage AC

3.000 V (40 Hz to 500 Hz) / 0.001 V

30.00 V (40 Hz to 500 Hz) / 0.01 V

300.0 V (40 Hz to 500 Hz) / 0.1 V

0.5% + 0.002 V

0.5% + 0.02 V

0.5% + 0.2 V

1.0% + 0.004 V

1.0% + 0.04 V

1.0% + 0.2 V

Current DC

30.000 mA

110.00 mA

0.01% + 5 uA

0.01% + 20 uA

0.015% + 7 uA

0.015% + 30 uA

Resistance

10.000 Ω

100.00 Ω

1.0000 kΩ

10.000 kΩ

0.05% + 50 mΩ

0.05% + 500 mΩ

0.1% + 10 Ω

0.07% + 70 mΩ

0.07% + 0.5 Ω

0.15% + 15 Ω

Frequency

1.00 to 110.00 Hz / 0.01 Hz

110.1 to 1100.0 Hz / 0.1 Hz

1.101 to 11.000 kHz / 0.001 kHz

11.01 to 50.00 kHz / 0.01 kHz

0.05 Hz

0.5 Hz

0.005 kHz

0.05 kHz

Source Accuracy

1 Year

2 Years

Voltage DC

100.000 mV

1.00000 V

15.0000 V

0.01% + 0.005 mV

0.01% + 0.00005 V

0.01% + 0.0005 V

0.015% + 0.005 mV

0.015% + 0.0005 V

Current DC

22.000 mA (source)

Current sink (simulate)

0.01% + 0.003 mA

0.02% + 0.007 mA

0.02% + 0.003 mA

0.04% + 0.007 mA

Resistance

10.000 Ω

100.00 Ω

1.0000 kΩ

10.000 kΩ

0.01% + 10 mΩ

0.01% + 20 mΩ

0.02% + 0.2 Ω

0.02% + 3 Ω

0.015% + 15 mΩ

0.015% + 30 mΩ

0.03% + 0.3 Ω

0.03% + 5 Ω

Frequency

0.1 to 10.99 Hz

0.01 to 10.99 Hz

11.00 to 109.99 Hz

110.0 to 1099.9 Hz

1.100 to 21.999 kHz

22.000 to 50.000 kHz

0.01 Hz

0.1 Hz

0.002 kHz

0.005 kHz

Can't find what you are looking for?

Get in touch