You are browsing the UK site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Quick quote: Keysight Technologies N9912C
Keysight Technologies N9912C
FieldFox RF Analyzer; 3 kHz to 4 / 6.5 / 10 GHz
Model
N9912CProduct Family
CableManufacturer
Keysight TechnologiesConfigured models contain the following attributes:
CableAntenna & PIM AnalyzersSite Masters / Cable TestersConfigurations
Key Specs
Product Overview
Resources
Let us help you with your exact configuration
Please use 'Get Quick Quote' or ‘Configure Unit’ and we’ll contact you and quote for your exact need.
You can also get in touch, if you prefer, and our experts will be able to guide you with the right application and procurement solution for this product.
Key Specs
Please refer to the Resources section for Datasheets or see the Product Overview.
If you would like to know more, please get in touch and one of our team will be happy to help.
Product Overview
With fully upgradable and license-key activated frequency, bandwidth, and over 20 software applications, easily customize your analysis to your requirements. Mix and match VNA and SA frequencies, and effortlessly upgrade the capabilities of your analyzer as your needs change. Choose the FieldFox software-defined configuration that best meets your needs.
| Key Features |
| Select from cable and antenna analyzer (CAT), Vector Network Analyzer (VNA), and/or Spectrum Analyzer with desired maximum frequency. |
| Capture elusive signals with up to 40 MHz gap-free, real-time bandwidth. |
| Measure all four S-parameters simultaneously with 115 dB dynamic range. |
| Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup. |
| Perform over-the-air measurements for 5G NR and LTE. |
| Use GPS/GNSS for geolocation and timestamping. |
| Carry one lightweight unit at 3.4 kg (7.4 lb). |
| Base unit | FieldFox RF analyzer | Available Upgrades |
| Instrument functions (must pick one from CA, NA and SA, only can pick one from each group CA, NA and SA) | ||
| N9912C-CA4 | Cable and antenna analyzer 4 GHz | |
| N9912C-CA6 | Cable and antenna analyzer 6.5 GHz | Frequency can be upgraded via N9912CU |
| N9912C-CAX | Cable and antenna analyzer 10 GHz | Frequency can be upgraded via N9912CU |
| N9912C-NA4 | Vector network analyzer 4 GHz | Full 2 port VNA |
| N9912C-NA6 | Vector network analyzer 6.5 GHz | Frequency can be upgraded via N9912CU |
| N9912C-NAX | Vector network analyzer 10 GHz | Frequency can be upgraded via N9912CU |
| N9912C-SA4 | Spectrum analyzer 4 GHz | |
| N9912C-SA6 | Spectrum analyzer 6.5 GHz | Frequency can be upgraded via N9912CU |
| N9912C-SAX | Spectrum analyzer 10 GHz | Frequency can be upgraded via N9912CU |
| Measurement options | ||
| N9912C-010 | VNA time domain | Requires network analyzer (NA) |
| N9912C-030 | Remote control capability | Requires an iOS or an Android device |
| N9912C-208 | USB power sensor meas. versus frequency | Require option 302 |
| N9912C-215 | TDR cable measurements | Requires an CA option |
| N9912C-220 | Tracking generator | Requires spectrum analyzer unless VNA option is ordered |
| N9912C-235 | Pre-amplifier | Require spectrum analyzer |
| N9912C-236 | Interference analyzer and spectrogram | Require spectrum analyzer |
| N9912C-238 | Spectrum analyzer time gating | Require spectrum analyzer |
| N9912C-302 | USB power sensor support | Need to order USB power sensor. See FAQ A |
| N9912C-307 | GPS receiver | Need to order GPA antenna, N9910X-825. See FAQ C |
| N9912C-308 | Vector voltmeter | Require VNA option |
| N9912C-309 | DC bias variable-voltage source | Recommend N9910X-713 cable. See FAQ D |
| N9912C-310 | Built-in power meter | No power meter required |
| N9912C-312 | Channel scanner | Require spectrum analyzer |
| N9912C-330 | Pulse meas. with USB peak power sensor | Require option 302 |
| N9912C-350 | Real-time spectrum analyzer (RTSA) | Require spectrum analyzer |
| N9912C-352 | Indoor and outdoor mapping | Require channel scanner at one from option 312, 370, 371, 378 and GPS option 307 |
| N9912C-355 | Analog demodulation | Require spectrum analyzer |
| N9912C-358 | EMF measurements | Require spectrum analyzer and 85572A Tri-axial antenna |
| N9912C-361 | EMI measurements | Require Spectrum analyzer |
| N9912C-366 | Interference finder (manual mode) | Require Spectrum analyzer, GPS option 307, and 85574A Handheld direction antenna |
| N9912C-370 | Over-the-air (OTA) LTE FDD | Require Spectrum analyzer and GPS option 307 |
| N9912C-371 | Over-the-air (OTA) LTE TDD | Require Spectrum analyzer and GPS option 307 |
| N9912C-378 | Over-the-air (OTA) 5G NR | Require Spectrum analyzer and GPS option 307 |
| N9912C-B04 | Analysis bandwidth, 40 MHz | Require Spectrum analyzer |
Keysight FieldFox Models and frequency ranges:
| Model | Description | CAT & VNA Frequency Range | SA Frequency | Connector |
| N9912C | FieldFox RF analyzer | 3 kHz to 4/6.5/10 GHz | 3 kHz to 4/6.5/10 GHz 2 | Type-N (f) |
| N9913B | 4 GHz FieldFox RF analyzer | 30 kHz to 4 GHz | 9 kHz to 4 GHz | Type-N (f) |
| N9912C | FieldFox RF analyzer | 3 kHz to 4/6.5/10 GHz | 3 kHz to 4/6.5/10 GHz 2 | Type-N (f) |
| N9913C | 4 GHz FieldFox RF analyzer | 3 kHz to 4 GHz | 3 kHz to 4 GHz | Type-N (f) |
| N9914B | 6.5 GHz FieldFox RF analyzer | 30 kHz to 6.5 GHz | 9 kHz to 6.5 GHz | Type-N (f) |
| N9914C | 6.5 GHz FieldFox RF analyzer | 3 kHz to 6.5 GHz | 3 kHz to 6.5 GHz | Type-N (f) |
| N9915B | 9 GHz FieldFox microwave analyzer | 30 kHz to 9 GHz | 9 kHz to 9 GHz | Type-N (f) |
| N9915C | 10 GHz FieldFox RF analyzer | 3 kHz to 10 GHz | 3 kHz to 10 GHz | Type-N (f) |
| N9916B | 14 GHz FieldFox microwave analyzer | 30 kHz to 14 GHz | 9 kHz to 14 GHz | Type-N (f) |
| N9917B | 18 GHz FieldFox microwave analyzer | 30 kHz to 18 GHz | 9 kHz to 18 GHz | Type-N (f) |
| N9918B | 26.5 GHz FieldFox microwave analyzer | 30 kHz to 26.5 GHz | 9 kHz to 26.5 GHz | 3.5 mm (m) |
| N9950B | 32 GHz FieldFox microwave analyzer | 300 kHz to 32 GHz | 9 kHz to 32 GHz | 2.4 mm (m) |
| N9951B | 44 GHz FieldFox microwave analyzer | 300 kHz to 44 GHz | 9 kHz to 44 GHz | 2.4 mm (m) |
| N9952B | 50 GHz FieldFox microwave analyzer | 300 kHz to 50 GHz | 9 kHz to 50 GHz | 2.4 mm (m) |
| N9953B | 54 GHz FieldFox microwave analyzer | 300 kHz to 54 GHz | 9 kHz to 54 GHz | 1.8 mm (m) |
Resources
File resources
Keysight N991xC FieldFox Datasheet
Can't find what you are looking for?
Get in touch
