The 3 GHz Communications Tester for FR1 Bands - 5G, IoT, LoRa, BlueTooth, GNSS, WiLAN, Cellular
The R&S CMW100 communication manufacturing test set is a trendsetting product for calibrating and verifying wireless devices. The R&S CMW100 can perform receiver and transmitter tests for cellular and non-cellular technologies. The R&S CMW100 features high measurement accuracy as well as parallel testing, and can be used to optimize test time and capacity utilization.
The R&S CMW100 communications manufacturing test set is based on the CMW platform. The flexible RF interface permits simultaneous testing of up to eight RF ports. The R&S CMW100 remote control and measurement concepts are compatible with the R&S®CMW500. Both testers use the same methods for optimizing test time and capacity utilization. The CMW100 can be used to cost-effectively calibrate and verify wireless devices in non-signaling mode (analyzer/generator).
| Key Features |
| Continuous frequency range up to 6 GHz |
| Multitechnology solution |
| Parallel testing on up to eight RF ports |
| High measurement performance |
| High measurement accuracy |
| Support of a wide range of methods for reducing test time and maximizing capacity utilization |
| Minimum space requirements and footprint |
| Low weight |
| Silent |
| High MTBF |
| Benefits |
| High flexibility when designing production concepts thanks to horizontal or vertical mounting |
| Short implementation time and ramp-up phase thanks to R&S®CMW500 - Production Test compatible T&M and remote control concept |
| High accuracy and throughput thanks to fully automatic level correction |
| Eco-friendly due to minimal space requirements and low energy consumption |
| Platform Overview |
|
CMW500
The all-in-one test platform
| The R&S®CMW500 wideband radio communication tester is the universal test platform for RF integration and protocol development.
The R&S®CMW500 includes a fully integrated end-toend (E2E) data solution that permits comprehensive IP throughput and quality measurements.
The R&S®CMW500 can be used in all phases – from product development to production to service.
It is the solution with the widest range of supported technologies.
|
CMW270
The expert for all non-cellular technologies
| The R&S®CMW270 wireless connectivity tester is a cost-effective alternative for development, production and service.
The non-cellular specialist offers features comparable to those of the R&S®CMW500.
It supports Bluetooth®, WLAN and broadcast technologies.
|
CMW290
The compact RF tester for basic functional tests
| The R&S®CMW290 functional radio communication tester is the cost-effective compact version of the R&S®CMW500.
The tester is the right instrument for users who need to measure fundamental RF characteristics or verify the functionality of wireless devices.
The R&S®CMW290 provides service companies with a high-quality, customized, automated test environment for functional input and output tests.
Powerful network emulation allows IoT/M2M system integrators to functionally test module integration and custom IP applications.
|
CMX500
The 5G NR signaling tester
| The R&R®CMX500 radio communication tester is the test platform for signaling tests in all 5G frequency bands: sub6 GHz (FR1) and mmWave (FR2).
In non-standalone (NSA) mode, the R&S®CMW500 supports legacy technologies in mixed operation with LTE.
|
CMP200
The mmWave (FR2) production tester
| The R&S®CMP200 radio communication tester consists of a vector signal analyzer and a generator for RF frequencies from 4 GHz to 20 GHz.
Together with the R&S®CMPHEAD30 remote radio head up/downconverter for the higher frequency ranges (mmWave), it forms a compact non-signaling test platform for production testing of 5G FR2 products.
|
CMW100
The sub6 GHz (FR1) RF tester for production
| The R&S®CMW100 communications manufacturing test set is based on the R&S®CMW platform.
The flexible RF interface permits simultaneous testing of up to eight RF ports.
The R&S®CMW100 remote control and measurement concepts are compatible with the R&S®CMW500.
Both testers use the same methods for optimizing test time and capacity utilization.
The R&S®CMW100 can be used to cost-effectively calibrate and verify wireless devices in non-signaling mode (analyzer/generator).
|
| Specifications |
|
|
| CMW100 communications manufacturing test set |
|
|
| Ordering Information |
|
|
| Model | Order Number | Description |
| CMW100 | 1201.0002K03 | Communications manufacturing test set |
| CMW-PS10 | 1210.7606.02 | Hardware kit |
| DCV-2 | 0240.2193.08 | Documentation of calibration values |
| CMW-PK461 | 1210.7129.02 | Extended frequency range, 4 GHz to 6 GHz |
| CMW-PKM121 | 1210.7164.02 | GSM WCDMA, TX measurements, UL |
| CMW-PKM151 | 1210.7187.02 | LTE, TX measurements, UL |
| CMW-PKM171 | 1210.7206.02 | TD-SCDMA, TX measurements, UL |
| CMW-PKM181 | 1210.7229.03 | CDMA2000® 1xEV-DO, TX measurements, DL |
| CMW-PKM611 | 1210.7264.02 | Bluetooth® BR EDR LE, TX measurements (SL) |
| CMW-PKM651 | 1210.7287.02 | WLAN 802.11 a/b/g/n/ac, TX measurements (SL) |
| CMW-PKV191 | 1210.7306.03 | waveforms for ARB generator |
Note:
The R&S®CMW100 communications manufacturing test set can be operated only in combination with a standard computer, which is not included. The required R&S®CMW100 software must be installed on the computer. It can be downloaded free of charge or ordered as an accessory (R&S®CMW100-Z31).
