You are browsing the TW site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
配置型號包含以下特性:
RF & MicrowaveRF Power Sensors10GHz <= 20GHz特性 | 參數 |
---|---|
High Frequency (range) | 10GHz <= 20GHz |
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
Key Features |
Low frequency coverage (9 kHz to 6 GHz) for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3) |
High sensitivity (-60 to +20 dBm) and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers |
Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies |
Special option available to 18 GHz |
Compatible with EPM (N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters |
Specifications | |||||
E93xxA E-Series Average Power Sensor | |||||
Model Overview | |||||
Sensor | Frequency Range | Maximum SWR (25 °C ± 10 °C) | Maximum SWR (0 to 55 °C) | Maximum Power | Connector Type |
–60 to +20 dBm Wide Dynamic Range Sensors | |||||
E9300A | 10 MHz to 18 GHz | 10 to < 30 MHz: 1.15 | 10 to < 30 MHz: 1.21 | +25 dBm (320 mW) average | Type-N (m) |
30 MHz to < 2 GHz: 1.13 | 30 MHz to < 2 GHz: 1.15 | +33 dBm peak (2 W) (< 10 μsec) | |||
2 to < 14 GHz: 1.19 | 2 to < 14 GHz: 1.20 | ||||
14 to < 16 GHz: 1.22 | 14 to < 16 GHz: 1.23 | ||||
16 to 18 GHz: 1.26 | 16 to 18 GHz: 1.27 | ||||
E9301A | 10 MHz to 6 GHz | 10 to < 30 MHz: 1.15 | 10 to < 30 MHz: 1.21 | +25 dBm (320 mW) average | Type-N (m) |
30 MHz to < 2 GHz: 1.13 | 30 MHz to < 2 GHz: 1.15 | +33 dBm peak (2 W) (< 10 μsec) | |||
2 to 6 GHz: 1.19 | 2 to 6 GHz: 1.20 | ||||
E9304A | 9 kHz to 6 GHz | 9 KHz to < 2 GHz: 1.13 | 9 KHz to < 2 GHz: 1.15 | +25 dBm (320 mW) average | Type-N (m) |
2 to 6 GHz: 1.19 | 2 to 6 GHz: 1.20 | +33 dBm peak (2 W) (< 10 μsec) |