配置型号包含以下属性:
RF & Microwave Network AnalyzersTest Sets50GHz <= 85GHz50GHz <= 85GHz属性 | 价值 |
---|---|
High Frequency (range) | 50GHz <= 85GHz |
Low Frequency (range) | 50GHz <= 85GHz |
The N5256BW is a frequency extender module supplied by OML to perform measurements with an N522xB PNA or N524xB PNA-X vector network analyzer in 60 to 90 GHz (E-band). It can be used with a PNA/PNA-X and an N5261/62/92A test set controller or directly connected with a 4-port PNA/PNA-X for direct control configuration. This measurement configuration allows you to run most of the PNA software applications in E-band.
The millimeter-wave modules are designed for use with the N5260/61/62A Millimeter-wave Module Controllers for banded vector network analyzer systems. Refer to the N5250C or N5261/62A Users Guides (N5260-90001 or N5262-90001) for system connections, operation and functional check.
The N5256A/B “T/R” Millimeter-wave Module contains an RF source multiplier, dual directional coupler, reference downconverter and a test downconverter. The T/R Millimeter-wave Module is usually the primary module of a millimeter-wave VNA system. A single T/R module allows the measurement of S11 reflection coefficient only.
The single and dual channel receiver modules are used for antenna applications or for 1-port single path S-parameter measurements.
VNA modules enable engineers to conduct mm-wave S-parameters. The DUT interface is the standard waveguide flange that complies with MIL-DTL-3922/67D. Organized by waveguide bands, VNA modules are available from 50 GHz to 0.5 THz.
The N5256BW15 will expand your existing VNA capabilities so you can conduct millimeter wave S-parameter measurements from 50 to 75 GHz.
Modules are available in a variety of S-parameter configurations: T/R, T and/or S. They also offer various options including variable attenuation, low power, intermodulation distortion measurements (IMD) and extended frequency bands.
Key Features |
Dynamic Range of 105 dB |
Output Power of +8 dBm |
Optional Manual Attenuation of 0 to 25 dB |
Raw Directivity of 37 dB |
Raw Test Port Match of 17 dB |
Stability of ±0.2 dB & ±2 deg |
Applications |
S-parameters for millimeter wave devices |
Truly broadband on-wafer device characterization |
Pulse setups to mitigate power handling considerations |
Filter passband and rejection verification |
Antenna characterization for lobes and polarization |
True differential measurements |
Specifications | ||
N5256B Waveguide Model and Options¹ | ||
Module Overview | ||
Waveguide Modules | Frequency Range | Waveguide Band |
N5256BW12 | 60 to 90 GHz | WR-12, T/R module (LO x6), cables not included |
N5256BX12 | 56 to 94 GHz | Extended WR-12, T/R module (LO x6), cables not included |
N5256BW15 | 50 to 75 GHz | WR-15, T/R module (LO x6), cables not included |
Note:
¹ Waveguide models maybe ordered with;
Option 001 (Adjustable RF Attenuator)
Option 002 (15 dB Gain, RF and LO Internal Amplifiers)
Option 003 (Option 001 and Option 002)
Option 004 (IF amp bypass jumpers).
Specifications | |||||
Transmission Reflection Modules | |||||
Module Overview | |||||
Waveguide Flange | Frequency (GHz) | Standard Transmission Reflection Modules | Transmission Reflection Modules; with 25dB Mechanical Attenuator | Transmission Reflection Modules; with 15dB LO and RF Amplifier¹ | Transmission Reflection Modules; with Adjustable Attenuator and 15dB Gain LO and RF Amplifier⁴ |
WR15¹ | 50 to 75 | N5256BW15-STD³ | N5256BW15-001 ³ | N5256BW15-002 ³ | N5256BW15-003 ³ |
WR12¹ | 60 to 90 | N5256BW12-STD³ | N5256BW12-001 ³ | N5256BW12-002 ³ | N5256BW12-003 ³ |
WR10 | 75 to 110 | N5256AW10-STD³ | N5256AW10-001 ³ | N5256AW10-002 ³ | N5256AW10-003 ³ |
WR08 | 90 to 140 | N5256AW08-STD | N5256AW08-001 | N5256AW08-002 | N5256AW08-003 |
WR06 | 110 to 170 | N5256AW06-STD | N5256AW06-001 | N5256AW06-002 | N5256AW06-003 |
WR05 | 140 to 220 | N5256AW05-STD | N5256AW05-001 | N5256AW05-002 | N5256AW05-003 |
WR03 | 220 to 325 | N5256AW03-STD | N5256AW03-001 | N5256AW03-002 | N5256AW03-003 |
WR02.2 | 325 to 500 | N5256AW02-STD | N/A | N5256AW02-002 | N/A |
Extended WR12² | 56 to 94 | N5256BX12-STD | N5256BX12-001 | N/A | N/A |
Extended WR10 | 67 to 110 | N5256AX10-STD | N5256AX10-001 | N/A | N/A |
Notes:
¹ BW15/12 and AW15/12 models cannot be mixed in a system. (BW and AW have different LO multipliers.)
² BX12 and AX12 model cannot be mixed in a system. (BX and AX have different LO multipliers.)
³ N5256AW12/15 and N5256AX12 are non-RoHS versions.
⁴ The modules with Option 003 have the +15 dBm RF/LO amplifiers. A 15 dB attenuator must be connected when the modules are connected with 1.2 m cables.
Specifications | ||
N5256A/B Waveguide Models | ||
Model Overview | ||
Keysight Model Number | Keysight Part Number | Vendor Module Part Number |
N5256A/B Standard Note: A Models are not compatible with B Models | ||
N5256AW02-STD | N5260-80039 | V02VNA2-T/R |
N5256AW03-STD | N5260-80017 | V03VNA2-T/R |
N5256AW05-STD | N5260-80019 | V05VNA2-T/R |
N5256AW06-STD | N5260-80012 | V06VNA2-T/R |
N5256AW08-STD | N5260-80015 | V08VNA2-T/R |
N5256AW10-STD | N5260-60020 | V10VNA2-T/R |
N5256BW12-STD | N5260-80692 | V12VNA2R-T/R |
N5256BW15-STD | N5260-80686 | V15VNA2R-T/R |
N5256BX12-STD | N5260-80668 | V12VNA2R-TR-5694 |
N5256A/B Option 001¹ Note: A Models are not compatible with B Models | ||
N5256AW03-001 | N5260-80038 | V03VNA2-T/R-A |
N5256AW05-001 | N5260-80035 | V05VNA2-T/R-A |
N5256AW06-001 | N5260-80044 | V06VNA2-T/R-A |
N5256AW08-001 | N5260-80116 | V08VNA2-T/R-A |
N5256AW10-001 | N5260-80036 | V10VNA2-T/R-A |
N5256AW12-001 | N5260-80112 | V12VNA2-T/R-A |
N5256AW15-001 | N5260-80052 | V15VNA2-T/R-A |
N5256AX12-001 | N5260-80115 | V12VNA2-T/R-A-5694 |
N5256BW12-001 | N5260-80691 | V12VNA2R-T/R-A |
N5256BX12-001 | N5260-80667 | V12VNA2R-T/R-A-5694 |
N5256BW15-001 | N5260-80685 | V15VNA2R-T/R-A |
N5256A/B Option 002² Note: A Models are not compatible with B Models | ||
N5256AW02-002 | N5260-80061 | V02VNA2-T/R-RLA |
N5256AW03-002 | N5260-80142 | V03VNA2-T/R-RLA |
N5256AW05-002 | N5260-80143 | V05VNA2-T/R-RLA |
N5256AW06-002 | N5260-80063 | V06VNA2-T/R-RLA |
N5256AW08-002 | N5260-80144 | V08VNA2-T/R-RLA |
N5256AW10-002 | N5260-80053 | V10VNA2-T/R-RLA |
N5256A Option 003³ | ||
N5256AW03-003 | N5260-80130 | V03VNA2-T/R-A-RLA |
N5256AW05-003 | N5260-80129 | V05VNA2-T/R-A-RLA |
N5256AW06-003 | N5260-80117 | V06VNA2-T/R-A-RLA |
N5256AW08-003 | N5260-80118 | V08VNA2-T/R-A-RLA |
N5256AW10-003 | N5260-80054 | V10VNA2-T/R-A-RLA |
Notes:
¹ Waveguide models with Option 001 (Adjustable RF Attenuator).
² Waveguide models with Option 002 (15 dB Gain, RF and LO Internal Amplifiers).
³ Waveguide models with Option 003 (Option 001 and Option 002), or Option 004 (IF Amplifier Bypass Jumpers).