配置型號包含以下特性:
RF & Microwave Network AnalyzersNetwork Analyzers20GHz <= 50GHz1kHz <= 100kHz3.5mm-Male (Jack)特性 | 參數 |
---|---|
High Frequency (range) | 20GHz <= 50GHz |
Low Frequency (range) | 1kHz <= 100kHz |
Connector Type | 3.5mm-Male (Jack) |
FieldFox is equipped to handle routine maintenance, in-depth troubleshooting and anything in between. FieldFox delivers Keysight-quality measurements – wherever you need to go. Add FieldFox to your kit, and carry precision with you.
The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone.
FieldFox 是一款多功能微波組合式分析儀,可輕鬆處理日常維護到深入故障排除等各種任務。無論你身在何處,FieldFox 都能提供 Keysight 品質的測量結果。將 FieldFox 加入你的工具箱,隨身攜帶精準測量能力。
這款微波組合式分析儀的基本功能是電纜和天線分析儀,可配置為包含頻譜和網路分析儀。FieldFox 還可選配其他功能,包括功率計、獨立訊號產生器、向量電壓計、干擾分析儀、可變直流電源、內建 GPS 接收器以及透過 iPad 或 iPhone 的遠端控制。
立即前往挑選更多 : 網路分析儀
Key Features |
26.5 GHz max frequency |
Carry the world’s most integrated handheld analyzer: standard model includes cable and antenna analyzer |
Expand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more |
Save time by measuring DTF and TDR in the same sweep |
Simultaneously measure all four S-parameters |
Make accurate spectrum analyzer measurements (± 0.5 dB) without needing warm-up |
Calibrate simply with QuickCal |
Lightest all-in-one analyzer at only 6.6 lb. (3.0 kg) |
Specifications | |
N9928A FieldFox Handheld Microwave Vector Network Analyzer | |
Features | Parameters |
Maximum Frequency | 26.5 GHz |
Minimum Frequency | 30 kHz |
Number of Built-In Ports | 2 ports |
Instrument Type | Vector Network Analyzer |
Cable and Antenna Analyzer | Yes - Optional |
Spectrum Analyzer | No |
Vector Network Analyzer | Yes - Standard |
Additional CAT/VNA Based Features | QuickCal (Subset) Vector Voltmeter Mixed-Mode S-Parameters DTF/TDR Cable Measurements |
Additional SA Based Features | Built-In Power Meter |
System Features | Built-In DC Source GPS Receiver - Internal Only |
Specifications | |
FieldFox Handheld Microwave Vector Network Analyzer | |
N991xA, N992xA Frequency Overview | |
Model | Frequency Range |
N9913A | 30 kHz to 4 GHz |
N9914A | 30 kHz to 6.5 GHz |
N9915A/N9925A | 30 kHz to 9 GHz |
N9916A/N9926A | 30 kHz to 14 GHz |
N9917A/N9927A | 30 kHz to 18 GHz |
N9918A/N9928A | 30 kHz to 26.5 GHz |
N995xA Frequency Overview | |
N9950A | 300 kHz to 32 GHz |
N9951A | 300 kHz to 44 GHz |
N9952A | 300 kHz to 50 GHz |
Specifications | |||||
FieldFox Handheld Analyzers Selection Guide | |||||
Maximum Frequency | Combination Models (CAT + VNA + SA) | Combination Models (CAT + VNA + SA) | VNA Models | VNA Models | SA Models |
4 GHz | N9912A-104 | N9913A | N9923A-104 | ||
6/6.5 GHz | N9912A-106 (2) | N9914A (3) | N9923A-106 (2) | ||
9 GHz | N9915A | N9925A | N9935A | ||
14 GHz | N9916A | N9926A | N9936A | ||
18 GHz | N9917A | N9927A | N9937A | ||
26.5 GHz | N9918A | N9928A | N9938A | ||
32 GHz | N9950A | N9960A | |||
44 GHz | N9951A | N9961A | |||
50 GHz | N9952A | N9962A |
Notes:
(1). Also referred to as cable and antenna analyzer
(2). Maximum frequency is 6 GHz.
(3). Maximum frequency is 6.5 GHz