配置型号包含以下属性:
RF & Microwave Network AnalyzersNetwork Analyzers10GHz <= 20GHz1kHz <= 100kHzType N-Female (Plug)属性 | 价值 |
---|---|
High Frequency (range) | 10GHz <= 20GHz |
Low Frequency (range) | 1kHz <= 100kHz |
Connector Type | Type N-Female (Plug) |
The VNA Master MS2037C is Anritsu's mid-tier model of the the MS202xC/3xC family, offering Vector Network Analyzer frequency coverage from 5 kHz to 15 GHz PLUS a Spectrum Analyzer covering 9 kHz to 15 GHz. The VNA Master MS2037C offers a high-performance spectrum analyzer with ultra-low noise floor. Based on Anritsu’s industry-leading handheld platform, the VNA Master MS2037C offers unmatched measurement capabilities and precision; reducing the number of different tools needed to analyze modern communication systems on land, sea, air and in space.
The Anritsu VNA Master MS2037C is the industry's highest performance, handheld solution for 2-port, 2-path measurements, anytime, anywhere. It specifically addresses complex coaxial or waveguide measurement needs in the field with accurate, vector corrected 2-port magnitude, phase, and standard Distance-To-Fault measurements (requires firmware V1.16 or higher). The VNA Master MS2037C covers a frequency band from 5 kHz to 15 GHz, which contains a wide variety of radio frequency communications systems.
Anritsu VNA Master MS2037C 是該公司 MS202xC/3xC 系列的中階型號,提供 5 kHz 至 15 GHz 的向量網路分析儀頻率覆蓋範圍,以及 9 kHz 至 15 GHz 的頻譜分析儀功能。該儀器擁有超低雜訊底板的高性能頻譜分析儀。
基於Anritsu領先業界的手持式平台,VNA Master MS2037C 提供無與倫比的測量能力和精度,減少了分析陸地、海洋、空中和太空現代通信系統所需的不同工具數量。
Anritsu VNA Master MS2037C 是業界性能最高的雙埠雙路測量手持式解決方案,可隨時隨地使用。它專門針對現場複雜同軸或波導測量需求,提供精確的向量校正雙埠幅度、相位和標準距離到故障測量(需要固件 V1.16 或更高版本)。VNA Master MS2037C 覆蓋 5 kHz 至 15 GHz 的頻段,包含各種無線通信系統。
Equally impressive, this measurement tool offers the industry's first 12-term error correction algorithm in a handheld VNA. With a typical measurement speed of 350 µsec per point, this is ideally suited for tuning filters in the field, where multiple S-parameters often interact during tuning. Using a 3-receiver architecture, the MS2037C can measure and display all 4 S-parameters at once with a single connection to the DUT.
RF engineers and technicians in the field provide installation and maintenance support for aerospace, defense, and general purpose communication systems around the world. These might typically include radars on Navy ships, communications on Army vehicles, flight-line test on Air Force and commercial jets. They support VHF Omni-directional Range (VOR) antennas in radio navigational systems globally. They will be routinely faced with a wide variety of system elements that can cause failures in the overall system: antennas, cables, filters, multiplexers, amplifiers, isolators, circulators, switches, and other sophisticated elements.
VNA Master also serves in new high technology applications such as radome/dielectric tests in the field. Its VNA error-correction functions vital to innovative test fixtures for dielectrics, laminates, ferrites, lossy paints, and more, offered by manufacturers such as Damaskos, Inc. Another novel application is the age-old problem of fault location in aircraft and shipboard wire cable bundles that snake through bulkheads and compartments.
+ Spectrum Analyzer (9 kHz to 15 GHz)
At the test site, the systems contain sophisticated transmitters and receivers, which require characterization of their complex transmitter and receiver (LO) signals for proper performance. These comprehensive signal tests increase the job complexity for the maintenance technician, on top of the VNA tests already needed. A field-friendly spectrum analyzer can greatly simplify this task. Spectrum analysis data are especially critical in microwave systems such as radars, defense electronics and communication systems up to 15 GHz).
The MS2037C VNA Master + Spectrum Analyzer adds a powerful spectrum diagnostic capability in the field to the already powerful MS2027C VNA Master! Don’t let the small footprint fool you; this combined instrument powerhouse offers performance and features that rival bench-top alternatives for simplifying spectrum monitoring, interference analysis, and other general purpose signal measurements in the field. The Spectrum Analyzer features up to 10 MHz RBW, and Burst Detect™ sweep mode that allows intermittent signals as short as 200 µS to be positively identified each and every time.
The VNA Master offers broad spectrum analysis frequency coverage, impressive dynamic range, and excellent phase noise performance from 9 kHz to 15 GHz. Now available with Coverage Mapping option (Option 0431) that simplifies the task of validating the power and quality of your signal coverage area, whether indoors or outdoors. Outdoor Coverage Mapping using the available internal GPS option provides accurate GPS location stamped data that allows users to easily find problem areas where signal strength is poor, users can easily compare actual measured results to theoretical predicted models, and optimize their coverage accordingly.
The new PIM Hunting mode in the Spectrum Analyzer is used for locating external IM products in conjunction with the MW82119B PIM Master.
The VNA Master + Spectrum Analyzer includes many one-button standard measurement sequences, including field strength, occupied bandwidth, channel power, adjacent channel power ratio, and carrier to interference (C/I) ratio. In addition, the built-in AM/FM/SSB demodulator simplifies the task of identifying interfering signals. Overall, the VNA Master + Spectrum Analyzer is a powerful handheld tool for general purpose spectrum analysis anywhere, anytime. Option 0025, Interference Analyzer is a very powerful tool which is extremely useful when troublesome interferers are causing problems you’re your communications system. With the Interference Analyzer option users can quickly and easily locate the source of interferer(s) and remedy the problem efficiently. Add the InterferenceHunter™ MA2700A accessory and you now have a complete and powerful tool that will help you in the final stages of tracking down the precise location of the interferer using GPS triangulation and detailed on-screen maps.
Key Features | |
VNA Master MS2037C (5 kHz to 15 GHz) | Ultimate accuracy with 12-term error correction User-defined Quad Display for viewing all 4 S-Parameters 350 μs/data point sweep speed |
Spectrum Analyzer (9 kHz to 15 GHz) | Measure: Occupied Bandwidth, Channel Power, ACPR, C/I DANL: –160 dBm in 1 Hz RBW Dynamic Range: > 104 dB in 1 Hz RBW Burst Detect PIM Hunting |
Specifications | ||
MS2037C VNA Master + Spectrum Analyzer | ||
Option | Description | Option Ordering Number |
Option 2 | Time Domain (includes Option 0501, Distance Domain) | MS2037C-0002 |
Option 7 | Secure Data Operation | MS2037C-0007 |
Option 10 | Built-in Variable Voltage Bias Tee | MS2037C-0010 |
Option 11 | K(f) Test Port Connector | MS2037C-0011 |
Option 15 | Vector Voltmeter | MS2037C-0015 |
Option 19 | High Accuracy Power Meter (Requires USB Sensors, sold separately) | MS2037C-0019 |
Option 25 | Interference Analysis - provides a spectrogram display, signal strength with audible tone and RSSI (received signal strength indication) (requires external antenna) | MS2037C-0025 |
Option 27 | Channel Scanner (requires external antenna) | MS2037C-0027 |
Option 31 | GPS Receiver (requires GPS antenna, sold separately) | MS2037C-0031 |
Option 77 | Balanced/Differential S-Parameters, 1-port | MS2037C-0077 |
Option 98 | Z-540 Calibration | MS2037C-0098 |
Option 99 | Premium Calibration | MS2037C-0099 |
Option 431 | Coverage Mapping (requires Option 31, GPS) | MS2037C-0431 |
Option 509 | AM/FM/PM Demodulation Analyzer | MS2037C-0509 |