快速報價: Rohde & Schwarz ZNA26 (1332.4500.24)

+886 701 0152 200需要幫忙？請與我們的專家聯繫

Rohde & Schwarz ZNA26 (1332.4500.24)

Vector Network Analyzer; 4 Port, 3.5 mm Connector, 10 MHz to 26.5 GHz

型號

ZNA26 (1332.4500.24)

產品類別

RF & Microwave Network Analyzers

製造商

Rohde & Schwarz

配置型號包含以下特性:

RF & Microwave Network AnalyzersNetwork Analyzers >=20GHz20GHz <= 50GHz1MHz <= 10MHz3.5mm-Male (Jack)Benchtop

配置

技术指标

產品總覽

資源

選擇您的配置

顯示:

搜尋和整合選項，例如“C4000; M400”

Rohde & Schwarz ZNA26 (1332.4500.24)的可用選項

選項	說明
ZNA-B4 (1332.4530.02)	Precision frequency reference for R&S®ZNA (Hardware option)
ZNA-B5 (1332.4675.02)	2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)
ZNA-B7 (1332.4546.02)	Memory extension for long time data recording, data streaming, extended pulse pattern recording for R&S®ZNA (Hardware option)
ZNA-B8 (1332.4652.02)	mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)
ZNA-B19 (1332.4600.03)	Additional removable SSD
ZNA-B26 (1332.4598.02)	Direct IF access for R&S®ZNA (Hardware option)
ZNA-B91 (1332.4800.02)	Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)
ZNA-K1 (1332.5320.02)	Spectrum analyzer mode for R&S®ZNA (software license)
ZNA-K2 (1332.5336.02)	Time domain analysis (TDR) for R&S®ZNA (software license)
ZNA-K4 (1332.5342.02)	Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)
ZNA-K5 (1332.5359.02)	Vector corrected converter measurements (without reference mixer and phase reference) for R&S®ZNA requires R&S®ZNA-K4 (software license)
ZNA-K7 (1332.5371.02)	Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)
ZNA-K8 (1332.5388.02)	mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)
ZNA-K9 (1332.5394.02)	Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)
ZNA-K17 (1332.5459.02)	Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)
ZNA-K19 (1332.5513.02)	1 mHz frequency resolution for R&S®ZNA (software license)
ZNA-K20 (1332.4746.02)	Extended time domain analysis incl. eye diagram for R&S®ZNA requires R&S®ZNA-K2 (software license)
ZNA-K30 (1332.5465.02)	Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)
ZNA-K220 (1339.3900.02)	In-Situ De-embedding (ISD) IEEE 370
ZNA26-B3 (1332.4523.02)	3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)
ZNA26-B16 (1332.4581.24)	Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)
ZNA26-B21 (1332.4630.21)	Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B22 (1332.4630.22)	Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B23 (1332.4630.23)	Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B24 (1332.4630.24)	Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B31 (1332.4700.31)	Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B32 (1332.4700.32)	Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B33 (1332.4700.33)	Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B34 (1332.4700.34)	Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)
ZNA26-B41 (1332.4775.41)	Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)
ZNA26-B42 (1332.4775.42)	Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)
ZNA26-B43 (1332.4775.43)	Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
ZNA26-B44 (1332.4775.44)	Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)
ZNA26-B161 (1332.4823.51)	Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)
ZNA26-B163 (1332.4823.53)	Direct source monitor access for port 1 and port 3 before the source step attenuator for R&S ZNA26 (4 ports) requires R&S ZNA26-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)
ZNA26-B213 (1332.4846.13 )	Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)
ZNA26-B213 (1332.4846.13)	Internal combiner for port 1 and port 3 for R&S®ZNA26 (4 ports). Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3. Upgrade / retrofit by R&S service Memmingen only. (Hardware option. Requires R&S®ZNA26-B21 and R&S®ZNA26-B23)
ZNA26-B302 (1332.4752.12)	Low noise pre-amplifier receiver port 2
ZNA26-B501 (1332.5220.11)	Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S ZNA26-B31, recommended: R&S ZNA26-B16, R&S ZNA26-B161, R&S ZNA26-B21)

顯示中 1 - 6 的 12 結果

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-558730

ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B33 (1332.4700.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B24 (1332.4630.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K30 (1332.5465.02) • Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-558729

ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K9 (1332.5394.02) • Group delay measurements on frequency converters without LO access for R&S®ZNA (4 ports recommended) requires R&S®ZNAxx-B16/R&S®ZNA-K4 (software license)ZNA26-B213 (1332.4846.13 ) • Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-653708

ZNA26-B24 (1332.4630.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA26-B213 (1332.4846.13 ) • Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K30 (1332.5465.02) • Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K8 (1332.5388.02) • mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B33 (1332.4700.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-558728

ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA26-B24 (1332.4630.24) • Source step attenuator for port 4, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA-K4 (1332.5342.02) • Scalar mixer measurements and arbitrary frequency-converting measurements for R&S®ZNA (software license)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA-K8 (1332.5388.02) • mmWave converter support for R&S®ZNA, R&S®ZVA-Zxxx, R&S®ZCxxx (software license)ZNA26-B22 (1332.4630.22) • Source step attenuator for port 2, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B33 (1332.4700.33) • Receiver step attenuator for port 3, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B161 (1332.4823.51) • Direct source monitor access, port 1, R&S®ZNA26 (HW opt.)ZNA-K30 (1332.5465.02) • Noise figure measurements on 2-port devices for ZNA (ZNAxx-B16/-B2x recommended) (software license)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-655449

ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B163 (1332.4823.53) • Direct source monitor access for port 1 and port 3 before the source step attenuator for R&S ZNA26 (4 ports) requires R&S ZNA26-B16/-B21/-B23 (Hardware option) (B-option ex factory only, ZNAxx-Uxx for retrofit)ZNA26-B501 (1332.5220.11) • Spur magnitude reduction for enhanced spectral purity with low RF output power, for Port 1. (Required: R&S ZNA26-B31, recommended: R&S ZNA26-B16, R&S ZNA26-B161, R&S ZNA26-B21)ZNA-K220 (1339.3900.02) • In-Situ De-embedding (ISD) IEEE 370ZNA-B19 (1332.4600.03) • Additional removable SSDZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA26-B31 (1332.4700.31) • Receiver step attenuator for port 1, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B213 (1332.4846.13 ) • Internal combiner for port 1 and port 3 for R&S ZNA26 (4 ports) Provides a two-tone signal at Port 1, combining the internal sources of Port 1 and Port 3 (Hardware option. Requires R&S ZNA26-B21 and R&S ZNA26-B23)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA26-B43 (1332.4775.43) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B302 (1332.4752.12) • Low noise pre-amplifier receiver port 2ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

Vector Network Analyzer, 4 ports 10 MHz to 26.5 GHz, 3.5 mm (m) connectors

產品編號: P-549303

ZNA26-B32 (1332.4700.32) • Receiver step attenuator for port 2, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B41 (1332.4775.41) • Internal pulse modulator for port 1 for R&S®ZNA26 (Hardware option)ZNA26-B42 (1332.4775.42) • Internal pulse modulator for port 2 for R&S®ZNA26 (Hardware option)ZNA26-B34 (1332.4700.34) • Receiver step attenuator for port 4, mechanical, 35 dB in 5 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B21 (1332.4630.21) • Source step attenuator for port 1, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA26-B3 (1332.4523.02) • 3rd and 4th internal source for R&S®ZNA26 (4 ports) (Hardware option)ZNA-B5 (1332.4675.02) • 2nd internal LO source, for R&S®ZNA (4 ports) external access up to 26.5 GHz requires option R&S®ZNA-B8 in addition (Hardware option)ZNA26-B16 (1332.4581.24) • Direct source and receiver access for R&S®ZNA26 (4 ports) Installation ex factory only (Hardware option)ZNA-B8 (1332.4652.02) • mmWave converter LO, 10 MHz to 26.5 GHz, for R&S®ZNA Enables mmWave converter setups utilizing a R&S®ZNA, or general external (IF) mixing. (used for mmWave-converter setups: Requires one of options R&S®ZNA-B26, ""Direct IF access"", or R&S®ZNA-B5, ""2nd internal LO src"". Used as general mixer LO: Requires R&S®ZNA-B5, ""2nd internal LO src"") (Hardware option)ZNA-K7 (1332.5371.02) • Measurements on pulsed signals (Pulse configuration, pulse profile and pulse train measurements) for R&S®ZNA requires R&S®ZNA-K17 (software license)ZNA26-B44 (1332.4775.44) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)ZNA-B91 (1332.4800.02) • Additonal trigger and control I/O ports for R&S®ZNA 3 trigger in, 4 trigger out, 4 pulse modulator control ports (I/O switchable), busy and ready for trigger indication, noise source control (28 V), RF OFF control input (Hardware option)ZNA26-B23 (1332.4630.23) • Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&S®ZNA26 Installation ex factory only (Hardware option)ZNA-B26 (1332.4598.02) • Direct IF access for R&S®ZNA (Hardware option)ZNA-K17 (1332.5459.02) • Increased IF bandwidth up to 30 MHz for R&S®ZNA (software license)ZNA-B4 (1332.4530.02) • Precision frequency reference for R&S®ZNA (Hardware option)ZNA26-B43 (1332.4775.43) • Internal pulse modulator for port 3 for R&S®ZNA26 (Hardware option)

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

顯示中 1 - 6 的 12 結果

* 價格及供應情況如有更改，恕不另行通知。所有價格可能因運輸條款、增值稅或銷售稅、進口關稅和匯率而有所不同。產品可能不是在所有地區都能買到。任何列出的折扣是基於全新儀器的售價並僅供參考;實際折扣可能會因選項、配置、貨幣匯率和其他因素而有所不同。保修期可能因儀器類別或特定產品而有差異。所有條款均需通過完整的書面報價確認。

¹ 對於我們的品質二手儀器，在發貨前需要進行23步認證檢查

技术指标

在選擇附件時標明其特性，有關附件詳細資訊請參見“配置”選項。

特性	參數
High Frequency (range)	20GHz <= 50GHz
Low Frequency (range)	1MHz <= 10MHz
Connector Type	3.5mm-Male (Jack)
Form Factor	Benchtop

產品總覽

The ZNA vector network analyzers are the high-end series of the R&S VNA portfolio: excellent RF-performance is combined with a wide range of software features and a unique hardware concept. The touch-only operation together with the DUT-centric approach makes the ZNA a powerful, universal and compact measurement system for characterizing both, passive and active devices.

The ZNA features exceptional stability, low trace noise and excellent raw data, making it a perfect choice for development and production applications that require high accuracy, e.g. for developing and producing components and modules for A&D and satellite applications.

The ZNA offers four internal, phase-coherent sources, allowing independent control of the signal's frequency at each port as well as phase measurements on mixers. It provides two internal LO sources, a true multichannel receiver architecture, pulse generators and modulators, an internal combiner and comprehensive trigger and synchronization capabilities. These hardware features make the ZNA a universal, compact test system for active and passive device characterization. Even intermodulation measurements on mixers and receivers can be performed without external signal generators, minimizing test time and simplifying test configuration.

Key Features

10 MHz to 26.5/43.5/50/67 GHz (ZNA26/43/50/67)

Two or four port models available

Excellent RF-performance

Up to four integrated sources

Unique and intuitive touch-only operation

Benefits

Excellent RF-Performance

(High performance and fast speed for advanced measurement tasks)

- Precise measurements on active and passive components.

- Wide dynamic range to characterize even high-blocking devices under test.

- Excellent stability, low trace noise and outstanding raw system data for high reliability.

- High accuracy suitable also for metrology applications.

- Wide power sweep range.

Versatile Hardware Options

(Powerful and universal measurement system)

- Optional direct channel access for wide dynamic range, external test setups and system integration.

- Up to four internal phase-coherent sources for high flexibility and short sweep times.

- Up to two internal receiver LOs for fast mixer measurements with low trace noise.

- Up to eight independent receivers for reliable multi-channel phase measurements.

- Up to four internal pulse modulators and pulse generators.

- Optional source and receiver step attenuators for expanding the usable power range.

Wide Range of Software Options

(Challenging measurements configured intuitively)

- Time domain analsis and extended features as eye diagram for signal integrity.

- Scalar mixer measurements and frequency converting measurements.

- Vector mixer measurements for advanced mixer measurements.

- Frequency converting measurements on mixers/converters without LO access.

- Spectrum analysis mode for an extensive analysis of the device under test.

- Real Time Measurement uncertainty calculation plus verification measurement (METAS VNA Tools)

Unique Operational Concept

(Intuitive touch-based operation with sophisticated user interface)

- Two independent touchscreens for convenient operation.

- Display of user-selected content (e.g. SCPI commands) on smaller screen possible.

- Efficient operation with multi-touch gestures.

- Free configuration of channels, diagrams with drag-and-drop.

- DUT-centric approach that adapts to the user's requirements and optimizes the settings.

- Extensive evaluation features for detailed analysis of measurement traces.

Extension Units

(Advanced measurement capabilities)

- Frequency extension p to 1.1 THz with the ZVA-Z and ZC converter families.

Accessories for a Complete Solution

(Different accessories for calibration, verification and different measurements)

- Mechanical calibraton and verification kits.

- Automatic calibration units.

- Inline calibration units for in-situ refresh of calibration data.

- Test cables.

- Torque wrenches.

- Support of NRP power sensor family.

Specifications
ZNA Series Vector Network Analyzers
Model Overview
Model	Order Number	Ports	Frequency	Connectors
ZNA26	1332.4500.22	2 ports	10 MHz to 26.5 GHz	3.5 mm(m)
ZNA26	1332.4500.24	4 ports	10 MHz to 26.5 GHz	3.5 mm(m)
ZNA43	1332.4500.42	2 ports	10 MHz to 43.5 GHz	2.92 mm(m)
ZNA43	1332.4500.43	2 ports	10 MHz to 43.5 GHz	2.4 mm(m)
ZNA43	1332.4500.44	4 ports	10 MHz to 43.5 GHz	2.92 mm(m)
ZNA43	1332.4500.45	4 ports	10 MHz to 43.5 GHz	2.4 mm(m)
ZNA50	1332.4500.52	2 ports	10 MHz to 50 GHz	2.4 mm(m)
ZNA50	1332.4500.54	4 ports	10 MHz to 50 GHz	2.4 mm(m)
ZNA67	1332.4500.62	2 ports	10 MHz to 67 GHz	1.85 mm(m)
ZNA67	1332.4500.64	4 ports	10 MHz to 67 GHz	1.85 mm(m)

Specifications
ZNA-Kxx
Options Overview
Model	Order Number	Description
ZNA-K1	1332.5320.02	Spectrum analyzer mode
ZNA-K2	1332.5336.02	Time domain analysis (TDR)
ZNA-K4	1332.5342.02	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K4	1332.5342.07	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K4	1332.5342.13	Scalar mixer and arbitrary frequency-converting measurements
ZNA-K5	1332.5359.02	Vector corrected converter measurements (without reference mixer and phase reference)¹
ZNA-K5	1332.5359.07	Vector corrected converter measurements (without reference mixer and phase reference)¹
ZNA-K6	1332.5413.02	Phase coherent source control
ZNA-K7	1332.5371.02	Measurements on pulsed signals²
ZNA-K8	1332.5388.02	Millimeterwave converter support
ZNA-K9	1332.5394.02	Group delay measurements on frequency converters without LO access³
ZNA-K9	1332.5394.07	Group delay measurements on frequency converters without LO access³

Note:

¹ Requires R&S®ZNA-K4.

² Requires R&S®ZNA-K17.

³ Requires R&S®ZNA-K4, R&S®ZNAxx-B16, and an R&S®ZNAxx-Z9 cable set, or R&S®ZNA-B213 internal combiner, for generating a two-tone signal. An R&S®ZNA (4 ports) is strongly recommended.