配置型号包含以下属性:
RF & Microwave Network AnalyzersCal Kits1GHz <= 10GHzDC属性 | 价值 |
---|---|
High Frequency (range) | 1GHz <= 10GHz |
Low Frequency (range) | DC |
The N7552A is part of Keysight’s family of value-line electronic calibration (ECal) modules that makes calibration of vector network analyzers fast, easy and accurate. Cut your calibration down to half the time it normally takes using a traditional mechanical cal kit. Simply connect it to your instrument and the firmware does the rest. For greater precision and higher accuracy measurements consider the N44xx and N469x family of ECal products.
The N7552A supports Keysight’s , PNA-X, PNA, ENA, and PXI vector network analyzers and FieldFox handheld analyzers. The N7552A is a 2-port ECal module that supports 3.5 mm connectors or Type N connectors. As a value-line product, it makes it cost effective to replace the N7552A than to have it recertified.
The firmware installed on the instrument is used to control the calibration module, making it a fully integrated solution. The calibration code on the instrument communicates via a USB 2.0 micro-interface and simplifies the calibration to a single connection for a full two-port calibrated measurement.
Key Features |
Frequency coverage from DC to 9 GHz |
Supports Type N and 3.5 mm connectors |
Smaller, lighter 2-port ECal module |
Zero wait time for faster calibration |
Convenience of ECal with the performance of an economy mechanical kit |
Specifications | |
Electronic Calibration (ECal) Module Overview | |
Model | Description |
N755xA Series 2-port Economy ECal Modules | |
N7550A | DC to 4 GHz |
N7551A | DC to 6.5 GHz |
N7552A | DC to 9 GHz |
N7553A | DC to 14 GHz |
N7554A | DC to 18 GHz |
N7555A | DC to 26.5 GHz |
8509xC Series 2-port RF ECal Modules | |
85091C | 300 kHz to 9 GHz |
85092C | 300 kHz to 9 GHz |
85093C | 300 kHz to 9 GHz |
85096C | 300 kHz to 3 GHz |
85098C | 300 kHz to 7.5 GHz |
85099C | 300 kHz to 3 GHz |
N469xD Series 2-port Microwave ECal Modules | |
N4690D | DC / 300 kHz to 18 GHz |
N4691D | DC / 300 kHz to 26.5 GHz |
N4692D | DC / 10 MHz to 40 GHz |
N4693D | DC / 10 MHz to 50 GHz |
N4694D | DC / 10 MHz to 67 GHz |
N4696D | DC / 300 kHz to 18 GHz |
N443xA/B Series 4-port ECal Modules | |
N4431B | 9 kHz to 13.5 GHz |
N4432A | 300 kHz to 18 GHz |
N4433A | 300 kHz to 20 GHz |
N443xD Series 4-port Ecal Modules | |
N4431D | DC to 13.5 GHz |
N4432D | DC/300 KHz to 18 GHz |
N4433D | DC/300 KHz to 26.5 GHz |
Specifications | |
RF Electronic Calibration Module (ECal) | |
Options and Accessories | |
Part Number | Description |
N7552A-150 | Plastic storage box |
N7552A-1A7 | Calibration + Uncertainties + Guardbanding (Not Accredited) |
N7552A-3FF | Both 3.5 mm connectors are female on module |
N7552A-3MF | 1 female and 1 male connector on module, both 3.5 mm |
N7552A-3MM | Both 3.5 mm connectors are male on module |
N7552A-A6J | ANSI Z540-1-1994 Calibration |
N7552A-NFF | Both type-N 50 connectors are female on module |
N7552A-NMF | 1 female and 1 male connector on module, both type-N 50 |
N7552A-NMM | Both type-N 50 connectors are male on module |
N7552A-UK6 | Commercial calibration certificate with test data |
N7550X-151 | 3.5 or 2.92 Torque Wrench |
N7550X-152 | Type-N Torque Wrench |