19”-Rack for ELM 5000 Modules
The new series EA-ELR 5000 was designed to configure a multi channel electronic DC load. In a rack for 19" systems, up to ten DC load units with 320W nominal power each can be installed. The modular units operate separately from each other, but require the rack as it contains the energy recovering DC-AC inverter.
The modules are also extendable. Parallel connection on the DC inputs of the module is possible.The load modules come in two voltage variants, 80V and 200V, and incorporate the common regulation modes constant voltage (CV), constant current (CC) and constant power (CP).
| Key Features |
| Multi Channel DC load |
| Energy recovery of the supplied DC energy into the local grid |
| 19" 6U rack for up to 10 seperae load modules |
| Input power ratings: up to 320W per module |
| Input currents: 12A or 25A |
| μ Controller based digital control |
| Bilingual TFT touch panel (DE/EN) |
| Sequence generator |
| Ethernet/LAN interface built-in |
| SCPI command language and ModBus RTU supported |
| Specifications |
|
EA-ELR 5000 Rack 6U
19”-Rack for ELM 5000 Modules |
|
| Features | Parameters |
| Product Type | DC Electronic Load with Inverter Function |
| Housing | 19" rack |
| Voltage (U) | 0 |
| Current (I) Ampere | 0 |
| Power (P) Watt | 3200 |
| Resistance (R) | No |
| Characteristic Curve | U/I/P autoranging |
| Human Interface | Touch panel & Menu |
| ext.control-analogue 0-5V/0-10V | No |
| ext.control - GPIB (IEEE488) | No |
| ext. control - USB | Yes |
| ext.control - RS232 | No |
| ext.control - CAN | No |
| ext.control - LAN | Yes |
| ext.control - Profibus | No |
| ext.control - DeviceNet | No |
| ext.control - Modbus | No |
| special feature - function generator | No |
