快速報價: Farnell AP100-30

+886 701 0152 200需要幫忙？請與我們的專家聯繫

Farnell AP100-30

DC Autoranging Power Supply; 100V / 30A / 1KW

型號

AP100-30

產品類別

Power Supplies / Electronic Loads

製造商

Farnell

配置型號包含以下特性:

Power Supplies / Electronic LoadsDC Power Supplies >50V

配置

技术指标

產品總覽

資源

讓我們為您提供準確的配置

請使用“獲取快速報價”，我們將根據您的需求與您聯繫並報價。

您也可以選擇保持聯繫，我們會為您提供正確的應用和採購解決方案。

產品總覽

The AP series power supplies utilise an autoranging concept and can provide a wide and adjustable range of voltage and current combinations within their constant power envelope. This is ideal for bench or systems use because a single unit will often meet your future as well as present needs.

Key Features

500W, 1kW and 3kW models available

Manual or IEEE 488.2 bus (GPIB)

High resolution programming and readback with interface options

Constant voltage or constant current operation

Operating modes: local or bus control, remote sensing, remote programming, auto parallel, auto series, auto tracking

Master/slave operation for more power or higher voltages

Digital LED panel meters and annunciators

Easily rack mountable, ideal for systems use

Active power factor correction on 3kW models

Benefits
Compact and Efficient	Because they utilise an efficient switchmode topology AP Series units are compact and relatively lightweight for their considerable power outputs. They are suitable for stand-alone bench use or for integrating into systems
Powerful Outputs	The voltage and current capability of the units is shown graphically in the SPECIFICATION section and can be determined when in use from two front panel bar graphs which show volts with available current, and current with available volts.
Protected	CV/CI power supplies are inherently safe as both output voltage and current will be automatically limited to the preset values.
Remote Sensing	When supplying a load which is some distance from the output, the remote sensing terminals should be used to maintain regulation at the load rather than at the unit’s output terminals. Up to 0.5 volts drop per load lead can be allowed for without degrading the specified CV performance.
Multiple Unit Operation	Up to four units can be connected for auto-parallel (master/slave) operation to increase total output current.

Specifications
AP Series Autoranging Power Supplies
Model Overview
Model	V Step	I Step	Programming Accuracy	Readback Accuracy
AP20-80	5mV	20mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP70-30	20mV	10mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP400-5	100mV	1.25mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP30-80	10mV	20mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP60-50	20mV	12.50mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP100-30	25mV	10mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP30-250	10mV	100mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP60-150	20mV	50mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s
AP100-90	25mV	25mA	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1% of output +0.13% f.s. Overvoltage trip: 1 % of output +0.16% f.s.	Voltage: 0.2% of output +0.13% f.s. Current:: 1.1 % of output +0 16% f.s

Specifications
AP Series Autoranging Power Supplies
Series Overview
Model	Description
1kW Power Limit
AP30-80	0-30V/0-80A
AP60-50	0-60V/0-50A
AP100-30	0-100V/0-30A
3kW Power Limit
AP30-250	0-30V/0-250A
AP60-150	0-60V/0-150A
AP100-90	0-100V/0-90A