快速報價: Elektro-Automatik EA-PSBE 10080-1000 4U

+886 701 0152 200需要幫忙？請與我們的專家聯繫

Elektro-Automatik EA-PSBE 10080-1000 4U

Programmable Bi-directional Power-Supply; 80V / 1000A / 30kW / 4U

型號

EA-PSBE 10080-1000 4U

產品類別

Power Supplies / Electronic Loads

製造商

Elektro-Automatik

配置型號包含以下特性:

Power Supplies / Electronic LoadsRegenerative Power Supplies

配置

技术指标

產品總覽

資源

讓我們為您提供準確的配置

請使用“獲取快速報價”，我們將根據您的需求與您聯繫並報價。

您也可以選擇保持聯繫，我們會為您提供正確的應用和採購解決方案。

產品總覽

The bidirectional power supplies of series EA-PSBE 10000 are the economy variants of series EA-PSB 10000 and offer the same power of 30 kW in only 4U, the same connectivity with all interfaces, but save costs due to reduced software features.

All models incorporate two devices in one: a power supply (source) and an electronic load (sink) with energy recovery. Based on these two features the devices offer the functionality of two-quadrants operation as standard.

The internal electronic load achieves a high voltage dynamics by discharging unavoidable capacities on the DC terminal. For a connected source, the devices are full electronic loads with energy recovery, also ideal for bigger systems. In source operation mode the device becomes a flexible, autoranging power supply like those of series EAPSI 10000 4U. It incorporates the advantages of both device types into one and at the same time it eliminates the disadvantages of separate units regarding weight, space requirement, costs and effort to implement them into custom test software.

Key Features

Wide range 342...528 V AC supply for operation on 380 V, 400 V or 480 V grids

US 208 V models available

Bidirectional device - power supply and electronic load in one

Energy recovery with high efficiency

Power rating: 30 kW (15 kW*) per device, expandable up to 1920 kW

Voltage ratings: 60 V up to 2000 V

Current ratings: 40 A up to 1000 A

Flexible, power regulated DC<->AC stage

Various protection circuits (OVP, OCP, OPP, OTP)

5" TFT touch panel with display for values, status and notifications

Remote sensing with automatic detection

Galvanically isolated interfaces (USB, Ethernet, analog, slot)

Optional, digital interface modules

SCPI and ModBus command set

LabView VIs and control software for Windows

Note:

* US208V models

Benefits
AC Supply	All models are provided with an active Power Factor Correction (PFC) circuit and are designed for operation on a three-phase supply with typical worldwide ratings between 380 V and 480 V AC. But also regions where only 208 V three-phase is available are covered by the US 208 V models. During load operation, the device recovers the consumed DC energy and feeds it back into the local power network. This helps saving a lot of energy costs.
Autoranging Power Stage	All models are equipped with a flexible autoranging bidirectional power stage which provides a higher output voltage at lower output current or a higher output current at lower output voltage, always limited to the max. rated output power. The same applies for sink mode operation. The power set value is adjustable with these models. Therefore, a wide range of applications can already be covered by the use of just one unit.
DC Output/Input	DC voltages between 0...60 V and 0 ...2000 V, current ratings between 0...40 A and 0...1000 A are available, all along with a power rating of 0...30kW for all standard models, while the US 208 V models are rated with 0...15 kW. The DC terminal is located on the rear panel.
Source-Sink Operation	One salient feature of these devices is the coalescence of an electronic load, also called sink, and a power supply, also called source, into one unit. It means, the device cannot only arbitrarily operate as sink or source, the switchover between these two operating modes occurs without interruption and time loss. This is also called two-quadrants operation.
Energy Recovery	The most important feature of these devices is that the AC input while connected to the grid is also used as output for the recovery of the supplied DC energy during load operation, which is converted with an efficiency of up to 95.5%. This way of energy recovery helps to lower costs and can avoid expensive cooling systems, such as they are required for conventional electronic loads which only convert energy into heat.
Master-Slave	All models feature a digital master-slave bus by default. It can be used to connect up to 64 units of identical models in parallel operation to a bigger system with totals formation of the actual value of voltage, current and power. This allows for a total power of up to 1920 kilowatts. The configuration of the master-slave system is either completely done on the control panels of the units or by remote control via any of digital communication interfaces. Handling of the master unit is possibly by manual or remote control (any interface).
Display and Control Panel	Set values and actual values of input & output voltage / current / power are clearly represented on the 5" graphic display. The color TFT screen is touch sensitive and can be intuitively used to control all functions of the device with just a finger tip. Set values of voltage, current, power or resistance can be adjusted using the rotary knobs or entered directly via a numeric pad. To prevent unintentional operations, all operation controls can be locked.
Analog Interface	There is a galvanically isolated analog interface terminal, located on the rear of the device. It offers analog inputs to set voltage, current, power and resistance from 0...100% through control voltages of 0 V...10 V or 0 V...5 V. To monitor the output voltage and current, there are analog outputs with 0 V...10 V or 0 V...5 V. Also, several inputs and outputs are available for controlling and monitoring the device status.

Specifications
EA-PSBE 10080-1000 4U 30000W Programmable Bidirectional DC Power Supply
Feature	Description
Product Type	DC Laboratory Power Supply
Rated Voltage and Range	0...80 V
Ripple (Source Mode) ¹	≤480 mV_PP / ≤83 mV_RMS
Insulation	Negative DC < - > PE: ±1500 V DC Positive DC < - > PE: +2000 V DC
Rated Current and Range	0...240 A
Rated Power	0...30 kW (0...15 kW) ⁴
Efficiency ⁵	Up to 94.6%
Weight ²	≈ 50 kg / 110 lb

Note:

¹ RMS value: measured at LF with BWL 300 kHz, PP value: measured at HF with BWL 20MHz

² Weight of the standard version, models with option(s) may vary

³ WC = water-cooling

⁴ US 208 V models

⁵ Both directions, i. e. source and sink mode

Specifications
EA-PSBE 10000 4U Series Programmable Bidirectional DC Power Supply
Model Overview
Model	Description
PSBE 10060-1000 4U	Rated Voltage and Range: 0...60 V Rated Current and Range: 0...1000 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 10080-1000 4U	Rated Voltage and Range: 0...80 V Rated Current and Range: 0...1000 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 10200-420 4U	Rated Voltage and Range: 0...200 V Rated Current and Range: 0...420 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 10360-240 4U	Rated Voltage and Range: 0...360 V Rated Current and Range: 0...240 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 10500-180 4U	Rated Voltage and Range: 0...500 V Rated Current and Range: 0...180 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 10750-120 4U	Rated Voltage and Range: 0...750 V Rated Current and Range: 0...120 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 11000-80 4U	Rated Voltage and Range: 0...1000 V Rated Current and Range: 0...80 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 11500-60 4U	Rated Voltage and Range: 0...1500 V Rated Current and Range: 0...60 A Rated Power: 0...30 kW (0...15 kW) *
PSBE 12000-40 4U	Rated Voltage and Range: 0...2000 V Rated Current and Range: 0...40 A Rated Power: 0...30 kW (0...15 kW) *

Note:

* US 208 V models

找不到您要的?

聯繫方式