配置型號包含以下特性:
Oscilloscope Probes10MHz <= 100MHz特性 | 參數 |
---|---|
High Frequency (range) | 10MHz <= 100MHz |
The TA041 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700 V (DC + peak AC). It can be used with signal speeds of up to 25 MHz.
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.
The TA041 is an active probe powered by either four AA batteries, included, or the PS008 power supply, available as an optional extra.
Specifications | |
Differential Oscilloscope Probe | |
Feature | Parameters |
Bandwidth | DC to 25 MHz (–3 dB) |
Attenuation Ranges | 10:1 / 100:1 |
DC Accuracy | ±2% |
Rise Time | 14 ns |
Input Impedance | 4 MΩ ∥ 5.5 pF each side to ground |
Input Voltage: | |
Differential Voltage Range (10:1) | ±70 V (DC + peak AC) or 70 V RMS |
Differential Voltage Range (100:1) | ±700 V (DC + peak AC) or 700 V RMS |
Common Mode Voltage Range | ±700 V (DC + peak AC) or 700 V RMS (10:1 and 100:1) |
Absolute Maximum Voltage (differential or common-mode) | ±1400 V (DC + peak AC) or 1000 V RMS CAT III (10:1 and 100:1) |
Output: | |
Swing | ±7 V into 2 kΩ load |
Offset (typical) | <±5 mV |
Noise (typical) | 0.7 mV RMS |
Source Impedance (typical) | 1 Ω @ 1 kHz, 8 Ω @ 1 MHz |
CMRR (typical) | 86 dB @ 50 Hz; 66 dB @ 20 kHz |
Ambient Operating Temperature | −10 to +40 °C |
Ambient Storage Temperature | −30 to +70 °C |
Ambient Operating Humidity | 25 to 85% RH |
Power Requirements | 4 AA cells or 6 V DC 60 mA mains adaptor or regulated 9 V DC 40 mA mains adaptor |
Length of Input Leads | 45 cm |
Length of BNC Lead | 95 cm |
Weight | 400 g (inc. probes and PVC jacket) |
Dimensions | 170 mm x 63 mm x 21 mm |
請聯繫我們查找與此產品相關的資料。
如果您想瞭解更多,請 聯繫,我們的團隊將為您提供幫助。