快速報價: Keysight Technologies E2649B

+886 701 0152 200需要幫忙？請與我們的專家聯繫

Keysight Technologies E2649B

USB 2.0 High-Speed Fixture Set

型號

E2649B

產品類別

Oscilloscopes & Logic Analyzers

製造商

Keysight Technologies

配置型號包含以下特性:

Oscilloscopes & Logic AnalyzersOscilloscopes

配置

技术指标

產品總覽

資源

選擇您的配置

顯示:

搜尋和整合選項，例如“C4000; M400”

Keysight Technologies E2649B的可用選項

選項	說明
15443B	Transition Time Converter
DEMACC	Demo Accessories
E2646A	USB LOW/FULL SQIDD FIXTURE
E2649A	USB Low/Full Speed Fixture Kit

顯示中 1 - 1 的 1 結果

USB 2.0 High-Speed Fixture Set

產品編號: P-603404

租賃

查詢報價

報價

數量

周

開始日期

二手購置

查詢報價

查詢

電子郵件 +886 701 0152 200

其他購置方案

查詢我們的金融解決方案

顯示中 1 - 1 的 1 結果

* 價格及供應情況如有更改，恕不另行通知。所有價格可能因運輸條款、增值稅或銷售稅、進口關稅和匯率而有所不同。產品可能不是在所有地區都能買到。任何列出的折扣是基於全新儀器的售價並僅供參考;實際折扣可能會因選項、配置、貨幣匯率和其他因素而有所不同。保修期可能因儀器類別或特定產品而有差異。所有條款均需通過完整的書面報價確認。

¹ 對於我們的品質二手儀器，在發貨前需要進行23步認證檢查

產品總覽

The N5416A USB 2.0 Compliance test software makes USB signal integrity testing as simple as capturing the signals with your oscilloscope; eliminating the need to transfer scope waveforms to a PC.
Automation:

Test setup wizard guides you through test selection, configuration, connection, execution, and results reporting
Measurement connection setups are displayed
Oscilloscope setup is automatically configured for each test
Test results report documents test configuration, measurements made, pass/fail status, margin analysis, and waveforms

Standards Supported:

USB-IF recognized for use in USB 2.0 compliance testing
MATLAB scripts used are from the USB-IF organization

Requirements:

E2649B for a complete set of six high-speed test fixtures and power supply
E2646A Signal Quality inrush Droop/Drop (SQiDD) for low/full speed testing

Extensibility:

Use the N5467A User Defined Application tool (www.keysight.com/find/uda) to:
Create and fully integrate custom tests, configuration variables and connection instructions.
Insert external application calls into the run sequence, such as MATLAB scripts or your device controller.
Configure additional external instruments used in your test suite.