配置型號包含以下特性:
Network & Fiber InstallationsOptical Spectrum AnalyzersModular特性 | 參數 |
---|---|
Form Factor | Modular |
The VIAVI Pol-Mux OSCA-710 is the first Optical Spectrum and Correlation Analyzer that can perform in-band OSNR measurement in high speed, ROADM based DWDM networks using polarization multiplexing transmission formats without shutting down optical channels. This module uses a novel, proprietary spectral correlation measurement technique (VIAVI pat.) along with an ultra-high resolution coherent receiver for complete signal characterization in amplitude, frequency, phase and polarization.
Key Features:
Highlights:
Applications:
Specifications | |
OSCA-710 (1) | |
Spectral Wavelength/Frequency Range Abs. Wavelength Accuracy Resolution Bandwidth Min Channel Spacing for Signal Separation Number of Optical Channels Display Resolution | 1527.6 – 1565.50 nm /196.25 – 191.50THz ±10 pm / ± 1250 MHz < 1 pm / < 100 MHz < 8pm / <1 GHz Up to 256 0.001 nm / 100 MHz |
Power Input Power Range (per channel) (2) Max. Non-Destructive Total Power Noise Floor Abs. Power Accuracy (4) Display Resolution | -40 to +10 dBm +23 dBm <-65 dBm ±0.6 dB 0.01 dB |
OSNR OSNR Measurement Modes OSNR Measurement Range (3) OSNR Measurement Accuracy (3) Modulation Formats | Out-of-band (IEC 61280-2-9), In-band (spectral correlation) Up to > 30 dB ±0.5dB all formats supported incl. DP-xPSK, DP-xQAM and Nyquist shaped signals |
Chromatic Dispersion Measurement Mode Measurement Range | In-service measurement of the chromatic dispersion per channel Up to >50.000 ps/nm |
Measurement Modes Analysis Display | In-band OSNR, WDM, Drift, DFB, CD Graph, WDM Table, Graph + Table |
UTM-710: Utility Module | Required for systems with >8 channels and/or channel power <-20dBm. Includes optical pre-amplifier and optical pre-filter |
Optical Interfaces OSCA-710, UTM-710 Optical Adapters ORL | SM-APC Interchangeable, type 2150/00.xx FC, SC, ST, DIN >35 dB |
Temperature Operating Storage | +0 to +30°C / 32 to 86°F −20 to +60°C /-4 to 140°F |
Dimensions and Weight OSCA-710 Module UTM-710 Module | 39x250x305 mm / 1.5x9.8x12 in 1.8 kg / 4 lbs 39x250x305 mm / 1.5x9.8x12 in 1.8 kg / 4 lbs |
Notes:
(1) Unless otherwise specified, all specifications are based on a temperature of 23°C ±2°C with an FC/APC connector after warm-up
(2) Measured in 0.1nm bandwidth
(3) Valid for OSNR measurements according IEC 61280-2-9. For in-band OSNR measurements at 100Gps DP-QPSK signals and >-20dBm/ch: OSNR range = 10 to 25 dB, OSNR accuracy = ±1 dB
(4) For 100Gbit/s modulated signals
Specifications | |
OSCA-710 | |
Ordering Information | |
Part Number | Description |
2323/91.11 | OSCA-710 module |
2323/86.11 | UTM-710 module (requires factory upgrade) |
2323/93.12 | OSCA-710 Kit (incl. OSCA-710 + UTM-710 + TB/MTS-8000 MF) |