快速報價: Anritsu MS9740A

+886 701 0152 200需要幫忙？請與我們的專家聯繫

Anritsu MS9740A

Optical Spectrum Analyzer (OSA); 600nm to 1750nm

型號

MS9740A

產品類別

Network & Fiber Installations

製造商

Anritsu

配置型號包含以下特性:

Network & Fiber InstallationsOptical Spectrum AnalyzersBenchtop

配置

技术指标

產品總覽

資源

讓我們為您提供準確的配置

請使用“獲取快速報價”，我們將根據您的需求與您聯繫並報價。

您也可以選擇保持聯繫，我們會為您提供正確的應用和採購解決方案。

特性	參數
Form Factor	Benchtop

產品總覽

The MS9740A is a benchtop optical spectrum analyzer covering 600 nm to 1750 nm. The MS9740A offers high-performance optical resolution and high-speed measurements to support the needs of device and component manufacturers.

Waveform data can be measured and transmitted to external control equipment within 0.2s -- a 5x improvement over previous Anritsu models.

The Optical Spectrum Analyzer MS9740A reduces the total time from waveform sweeping to data transfer to external control equipment and supports simple analysis procedures, offering excellent cost performance and better productivity.

Key Features

Measurement of passive optical devices in <0.2s(5nm) reduces total analysis time

Dedicated applications for evaluating active optical devices

Excellent cost performance

Dynamic range performance ≥60 dB (0.4 nm from peak wavelength)

30 pm minimum resolution bandwidth

Supports SM and MM fibers

Lightweight, 50% less power consumption

Specifications
Optical Spectrum Analyzer (OSA)
Model	MS9740A	MS9740A-009
Applicable Optical Fiber	10 μm/125 μm SM fiber (ITU-T G.652), 50 μm/125 μm GI fiber	10 μm/125 μm SM fiber (ITU-T G.652), 50 μm/125 μm GI fiber, 62.5 μm/125 μm GI fiber
Optical Connector	User replaceable: FC, SC, ST, DIN	User replaceable: FC, SC, ST, DIN
Wavelength Measurement Range	600 nm to 1750 nm	600 nm to 1750 nm
Wavelength Accuracy	±20 pm (1520 nm to 1620 nm, Resolution: 0.03 to 0.2 nm)1, 2 ±100 pm (1520 nm to 1620 nm, Resolution: 0.5, 1.0 nm)1, 2	±50 pm (1530 nm to 1570 nm, Resolution: 0.07 to 0.2 nm)3, 4 ±100 pm (1530 nm to 1570 nm, Resolution: 0.5, 1.0 nm)3, 4
Setting Resolution	0.03, 0.05, 0.07, 0.1, 0.2, 0.5, 1.0 nm (RBW: 3 dB optical filter: transmission bandwidth)	0.07, 0.1, 0.2, 0.5, 1.0 nm (RBW: 3 dB optical filter: transmission bandwidth)
Maximum Input power	+23 dBm (Optical ATT: On)	+23 dBm (Optical ATT: On)
Dynamic Range	High dynamic range: 60 dB (0.4 nm from peak wavelength)1 Normal dynamic range: 58 dB (0.4 nm from peak wavelength)1 [Resolution: 0.05 nm, 1550 nm, Optical ATT: Off, 20° to 30°C]	High dynamic range: 60 dB (0.5 nm from peak wavelength)3 Normal dynamic range: 58 dB (0.5 nm from peak wavelength)3 [Resolution: 0.07 nm, 1550 nm, using SM fiber, Optical ATT: Off, 20° to 30°C]
Sweep	Sweep width: 0.2 nm to 1200 nm, 0 nm Sweep speed: ≤0.2 sec. (Span 5 nm) [Resolution: 0.1 nm, VBW=10 kHz, Normal dynamic range, center 1550 nm, sweep start to stop, no optical input, sampling point: ≤501]	Sweep width: 0.2 nm to 1200 nm, 0 nm Sweep speed: ≤0.2 sec. (Span 5 nm) [Resolution: 0.1 nm, VBW=10 kHz, Normal dynamic range, center 1550 nm, sweep start to stop, no optical input, sampling point: ≤501]
Dimensions and Mass	426 (W) × 177 (H) × 350 (D) mm (excluding projections) ≤15.0 kg (without option)	426 (W) × 177 (H) × 350 (D) mm (excluding projections) ≤15.0 kg (without option)

Notes:

*1: Using SM fiber (ITU-T G.652), after 2 hours of warm-up (the Repeat sweeping performed at Span 100 nm or more and VBW 10 kHz or more during the warm-up operation), after Auto Align, at stable room temperature.

*2: Built-in option 002, after Wl cal (ref) wavelength calibration execution, at stable room temperature.

*3: Warm-up the instrument for at least 2 hours before measurement by performing repeated sweeping at span ≥100 nm, VBW = 10 kHz. Perform waveform calibration after auto-optical alignment (WI Cal) and keep the instrument at the same temperature unless stated otherwise. Use either SM fiber (ITU-T G.652) or GI fiber (50 μm/125 μm) with a return loss of >40 dB, or GI fiber (62.5 μm/125 μm) with a return loss of >38 dB.

*4: Built-in MS9740A-002, after Wl Cal (Ref), with SM fiber.

找不到您要的?

聯繫方式