The Fujikura specialty fiber splicer FSM-100 series offers a host of innovative technologies to address the rapidly expanding splicing needs for factory, manufacturing, laboratory and R&D applications. These capabilities is revolutionizing the way users splice various types of specialty fibers, LDFs, PMFs and so on.
| Key Features |
|
| Optimal Plasma Zone Control | The patented “Split V-groove” and electrode systems create flexibility within the plasma zone. |
Polarization Maintain fiber splicing
(FSM-100P, FSN-100P+)
| Three alignment methods for PM fibers:
Fast PANDA mode alignment by PAS system
New IPA mode for alignment of all kinds of PM fibers
EndView PM fiber alignment（FSM-100P+ only)
|
| Enhanced Power Calibrations | The FSM-100 series provides three types of arc calibration methods for both 125μm fibers and LDFs. |
| Dual Splice Loss Estimation | FSM-100 series provides loss estimation methods using either cold or warm splice Images for accurate splice loss estimation. |
| USB, GPIB Communication | The splicer firmware can be upgraded via internet connection. Also, splice data upload/download is available via PC.
The GPIB connection provides power meter feedback alignment capabilities.
|
| Specifications |
|
|
|
|
Fusion Splicer
FSM-100 series |
|
|
|
|
| Series Overview |
|
|
|
|
| Model | FSM-100P | FSM-100M | FSM-100P+ | FSM-100M+ |
| Cladding Diameter | 60 to 500μm | 60 to 500μm | 60 to 1200μm | 60 to 1200μm |
| Heating Area | Narrow | Narrow | Wide | Wide |
| Electrode Swing | ー | ー | ✔ | ✔ |
| PM Fiber Splicing | ✔ | ー | ✔ | ー |
| End View Fiber Observation System | ー | ー | ✔ | ✔ |
| Sweep Length | 0 to 10mm | 0 to 10mm | 0 to 36mm | 0 to 36mm |
