配置型号包含以下属性:
Network & Fiber InstallationsFiber Optic Light Sources很抱歉,我们目前在线上没有有关此产品关键规格的任何信息。
如果您想了解更多信息,请保持联系和我们的团队之一 乐于提供帮助。
With up to three singlemode wavelengths on a single port, or four wavelengths (two multimode, and two singlemode) on two ports, the FLS-300 is the most versatile, complete light source available.
Key Features |
Can transmit with a wavelength-identification digital encrypted protocol so that any compatible unit can automatically use the proper calibration parameters |
Autonomy of 120 hours |
Instrument identification available in six languages |
Highest output power in the industry |
Three-year warranty and recommended calibration interval, for dramatically reduced cost of ownership |
Benefits | |
An FTTx Test Solution | This product is part of EXFO's series of FTTx optical test products. It allows for the testing of passive optical networks (PONs) at the three main wavelengths (1310, 1490 and 1550 nm) used in fiber-to-the-home (FTTH) and fiber-to-the-premises (FTTP) networks and complies with the ITU-T G.983 and G.984 Recommendation series and the IEEE 802.3ah standard. |
Auto-Wavelength Recognition | The FLS-300 Light Source can transmit with a wavelength-identification digital encrypted protocol, so that any compatible unit—the FPM-300 Power Meter and the FOT-300 Optical Loss Test Set—can automatically use the proper calibration parameters. This feature reduces the need for communication between the two technicians and decreases the potential for error. |
Distant Referencing | Signal encrypting can also give the receiving end information on the power to be used as reference, helping ensure efficient referencing, even when the two units are far apart. |
Specifications¹ | ||||
FLS-300 Lightsource Network Testing Optical | ||||
Model² | 23BL | 234BL | 235BL | 12D |
Central Wavelength (nm) | 1310 ± 20 1550 ± 20 | 1310 ± 20 1550 ± 20 1625 ± 15 | 1310 ± 20 1490 ± 10 1550 ± 20 | 850 ± 25 1300 +50/–20 |
Spectral Width³ (nm) | ≤5 | ≤5 | ≤5 | 50/135 |
Output Power (dBm) | ≥1/≥1 | ≥1/≥–3/≥–5 | ≥1/≥–4.5/≥–3 | ≥–20/≥–20 (62.5/125 µm) |
Power Stability ⁴ (dB) (8 Hours) | ±0.10 | ±0.10 | ±0.10 | ±0.10 |
Battery Life ⁵ (Hours) | 120 | 100 | 120 | 120 |
Enables Automatic Wavelength Recognition | Yes | Yes | Yes | Yes |
Tone Generation (Hz) | 270, 1 k, 2 k | 270, 1 k, 2 k | 270, 1 k, 2 k | 270, 1 k, 2 k |
Warranty and Recommended Calibration Interval (years) | 3 | 3 | 3 | 3 |
Notes:
¹. Guaranteed unless otherwise specified.
². All specifications valid at 23 °C ± 1 °C, with an FC connector.
³. rms for lasers and —3 dB width for LEDs; typical values for LEDs.
⁴. After 15 minutes warmup; expressed as ± half the difference between the maximum and minimum values measured during the period, with an APC connector on the power meter.
⁵. Typical autonomy in Auto mode.
Specifications | |
FLS-300 Light Source | |
Model Overview | |
Model (FLS-300-XX) | Description |
FLS-300-12D | 850/1300 nm LED 62.5/125 µm |
FLS-300-23BL | 1310/1550 nm laser 9/125 µm * |
FLS-300-234BL | 1310/1550/1625 nm laser 9/125 µm |
FLS-300-235BL | 1310/1490/1550 nm laser 9/125 µm * |
FLS-300-12D-23BL | 850/1300 nm LED 62.5/125 µm 1310/1550 nm laser 9/125 µm |
Connector (FLS-300-XX-XX) | |
EI-EUI-28 | UPC/DIN 47256 |
EI-EUI-76 | UPC/HMS-10/AG |
EI-EUI-89 | UPC/FC narrow key |
EI-EUI-90 | UPC/ST |
EI-EUI-91 | UPC/SC |
EI-EUI-95 | UPC/E-2000 |
EI-EUI-98 | UPC/LC |
EA-EUI-28 | APC/DIN 47256 * |
EA-EUI-89 | APC/FC narrow key * |
EA-EUI-91 | APC/SC |
EA-EUI-95 | APC/E-2000 * |
EA-EUI-98 | APC/LC |
Note:
* EA-EUI only available on models 23BL, 234BL and 235BL.