配置型号包含以下属性:
MultimeterData AcquisitionCounters & Function GeneratorsDigital Multimeters很抱歉,我们目前在线上没有有关此产品关键规格的任何信息。
如果您想了解更多信息,请保持联系和我们的团队之一 乐于提供帮助。
The Fluke 753 is a powerful multifunction documenting calibrator that lets you download procedures, lists, and instructions created with software, and upload data for printing, archiving, and analysis. You'll find it does the work of several tools, with simultaneous source and measurement capabilities for all common process parameters. It sources, simulates, and measures pressure, temperature, and electrical signals in one rugged, hand-held calibration tool. It also automates calibration procedures, captures data for documentation, and helps you meet rigorous standards like ISO 9000, FDA, EPA, and OSHA regulations.
The 753 includes a USB interface and a USB communication cable to enable two-way communication with DPCTrack2 and other instrumentation management applications. To create a seamless/paperless calibration management system consider adding Fluke DPCTrack2 Calibration Management software for use with your Fluke 753 and 754 or even legacy Fluke 743 and 744 calibrators.
Key Features |
Measures and sources pressure using any of 50 Fluke 700Pxx Pressure Modules |
Allows you to creates and run automated as-found/as-left procedures to satisfy quality programs or regulations, and record and document results |
Holds up to a full week of downloaded procedures and calibration results |
Offers many flexible features like autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay and more. |
Offers compatibility with DPCTrack2 and many other asset management software packages |
Bright white dual display for reading both sourced and measured parameters simultaneously |
Easy-to-use multi-lingual interface |
Gas gauge and rechargeable Li-Ion battery for 10 hour uninterrupted use |
Comes with three-year warranty and DPC/Track trial software |
Specifications | |
FLUKE-753 EU Documenting Process Calibrator | |
Model Overview | |
Model | FLUKE-753 EU |
Data log functions | Measure functions: Voltage, current, resistance, frequency, temperature, pressure Reading rate: 1, 2, 5, 10, 20, 30, or 60 readings/minute Maximum record length: 8000 readings (7980 for 30 or 60 readings/minute) |
Ramp functions | Source functions: Voltage, current, resistance, frequency, temperature Rate: 4 steps/second Trip detect: Continuity or voltage (continuity detection not available when sourcing current) |
Loop power function | Voltage: Selectable, 26 V Accuracy: 10%, 18 V minimum at 22 mA Maximum current: 25 mA, short circuit protected Maximum input voltage: 50 V DC |
Step functions | Source functions: Voltage, current, resistance, frequency, temperature Manual step: Selectable step, change with arrow buttons Autostep: Fully programmable for function, start delay, stepvalue, time per step, repeat |
Operating temperature | -10°C to +50°C |
Storage temperature | -20°C to +60°C |
Dust/water resistance | Meets IP52, IEC 529 |
Operating altitude | 3000 m above mean sea level (9842 ft) |
Size | 136 x 245 x 63 mm (5.4 x 9.6 x 2.5 in) |
Weight | 1.2 kg (2.7 lb) |
Batteries | Internal Battery Pack Li-ion: 7.2 V, 4400 mAh, 30 Wh |
Battery life | > 8 hours typical |
Battery replacement | Via snap-shut door without opening calibrator; no tools required |
Side port connections | Pressure module connector USB Connector to interface to your PC Connection for optional battery charger/eliminator |
Data storage capacity | 1 week of calibration procedures results |
90 day specifications | The standard specification interval for the 750 Series are 1 and 2 years. Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. |
Agency approvals | CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993 |
Measurement Accuracy | |||
Voltage | Range /Resolution 100.000 mV 3.00000 V 30.0000 V 300.00 V | 1 Year 0.02% + 0.005 mV 0.02% + 0.00005 V 0.02% + 0.0005 V 0.05% + 0.05 V | 2 Years 0.03% + 0.005 mV 0.03% + 0.00005 V 0.03% + 0.0005 V 0.07% + 0.05 V |
Voltage AC | 3.000 V (40 Hz to 500 Hz) / 0.001 V 30.00 V (40 Hz to 500 Hz) / 0.01 V 300.0 V (40 Hz to 500 Hz) / 0.1 V | 0.5% + 0.002 V 0.5% + 0.02 V 0.5% + 0.2 V | 1.0% + 0.004 V 1.0% + 0.04 V 1.0% + 0.2 V |
Current DC | 30.000 mA 110.00 mA | 0.01% + 5 uA 0.01% + 20 uA | 0.015% + 7 uA 0.015% + 30 uA |
Resistance | 10.000 Ω 100.00 Ω 1.0000 kΩ 10.000 kΩ | 0.05% + 50 mΩ 0.05% + 50 mΩ 0.05% + 500 mΩ 0.1% + 10 Ω | 0.07% + 70 mΩ 0.07% + 70 mΩ 0.07% + 0.5 Ω 0.15% + 15 Ω |
Frequency | 1.00 to 110.00 Hz / 0.01 Hz 110.1 to 1100.0 Hz / 0.1 Hz 1.101 to 11.000 kHz / 0.001 kHz 11.01 to 50.00 kHz / 0.01 kHz | 0.05 Hz 0.5 Hz 0.005 kHz 0.05 kHz |
Source Accuracy | |||
1 Year | 2 Years | ||
Voltage DC | 100.000 mV 1.00000 V 15.0000 V | 0.01% + 0.005 mV 0.01% + 0.00005 V 0.01% + 0.0005 V | 0.015% + 0.005 mV 0.015% + 0.0005 V 0.015% + 0.0005 V |
Current DC | 22.000 mA (source) Current sink (simulate) | 0.01% + 0.003 mA 0.02% + 0.007 mA | 0.02% + 0.003 mA 0.04% + 0.007 mA |
Resistance | 10.000 Ω 100.00 Ω 1.0000 kΩ 10.000 kΩ | 0.01% + 10 mΩ 0.01% + 20 mΩ 0.02% + 0.2 Ω 0.02% + 3 Ω | 0.015% + 15 mΩ 0.015% + 30 mΩ 0.03% + 0.3 Ω 0.03% + 5 Ω |
Frequency
| 0.1 to 10.99 Hz 0.01 to 10.99 Hz 11.00 to 109.99 Hz 110.0 to 1099.9 Hz 1.100 to 21.999 kHz 22.000 to 50.000 kHz | 0.01 Hz 0.01 Hz 0.1 Hz 0.1 Hz 0.002 kHz 0.005 kHz |