You are browsing the NO site. Would you like to be redirected to another country or region to see content and products specific to your location?
US
Quick quote: Rohde & Schwarz FPL1003 (1304.0004.03)
Rohde & Schwarz FPL1003 (1304.0004.03)
Spectrum Analyzer; 5 kHz to 3 GHz
Model
FPL1003 (1304.0004.03)Product Family
RF & Microwave Spectrum AnalyzersManufacturer
Rohde & SchwarzConfigured models contain the following attributes:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Economy1GHz <= 10GHz1kHz <= 100kHzConfigurations
Key Specs
Product Overview
Resources
Choose your configuration
Show:
Available Options for Rohde & Schwarz FPL1003 (1304.0004.03)
| Option | Description |
|---|---|
| R&S®Accredited Calibration for FPL1003 - Accredited calibration certificate - ISO 17025 accredited and ISO 9001 certified, traceability to national/ international standards - Measurement of complete product specifications with the same procedures as used in production, incl. measurement uncertainties/ guardbanding - Documentation of calibration results upon receipt | |
| Calibration Coverage 2 Years from delivery for FPL1003: - 1 scheduled R&S®Manufacturer- Calibration according to the 12 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 3 Years from delivery for FPL1003: - 2 scheduled R&S®Manufacturer- Calibrations according to the 12 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 4 Years from delivery for FPL1003: - 3 scheduled R&S®Manufacturer- Calibrations according to the 12 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Calibration Coverage 5 Years from delivery for FPL1003: - 4 scheduled R&S®Manufacturer- Calibrations according to the 12 month recommended calibration interval - All necessary R&S®Manufacturer- Calibrations in case of repair or option upgrade | |
| Extension of the 3 year standard product warranty to 4 years and Calibration Coverage for FPL1003 for 4 years: - 3 scheduled R&S®Manufacturer- Calibrations according to the 12 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Extension of the 3 year standard product warranty to 5 years and Calibration Coverage for FPL1003 for 5 years: - 4 scheduled R&S®Manufacturer- Calibrations according to the 12 month recommended calibration interval - All repairs and all necessary R&S®Manufacturer-Calibrations after repair or option upgrade | |
| Documentation of calibration values | |
| Documentation of calibration values | |
| Printout of DCV (additional, in combination with DCV-Option only) | |
| OCXO, precision frequency reference, aging/Year: < 1x10-7, Temp.-drift: < 1x10-7, retrofitable in R&S Service (hardware option) | |
| Additional interfaces: User port, noise source control, power sensor, IF/video/demod out, AF output, plug-in unit (hardware option) | |
| Internal Generator 5 kHz - 3 GHz (for R&S®FPL1003) (factory fitted option) | |
| Additional interface for remote control by GPIB, plug-in unit (hardware option) | |
| Second hard disk for R&S®FPL1000, premounted on PC-board, including analyzer Firmware, for exchange against standard hard drive (hardware option) | |
| RF preamplifier, 2 MHz to 3 / 7.5 GHz, Gain 20 dB (software license) | |
| 1 dB steps for the electronic attenuator (software license) | |
| DC Power supply for 12/24 V supply voltage, plug-in unit (hardware option) | |
| Li-Ion battery pack for internal battery slot, includes charging unit, charges by 110/240 V AC or optional 12/24 V DC supply retrofittable in R&S Service (hardware option) | |
| Extension to 40 MHz signal analysis bandwidth (software license) (For use in ZNL, ZNLx-B1 is required) | |
| Noise Figure and Gain Measurement (software license). FPL1-B5 and ext. noise source are required. For use in FPL, internal pre-amplifier option FPL1-B22 is recommended, For use in ZNL, an ext. pre-amp is recommended and option ZNLx-B1 is required. | |
| EMI measurement application for diagnostics of RF interference (software license) | |
| Vector Signal Analysis Application for modulation analysis on digital modulated single carrier signals (software license) | |
| Vector Signal Analysis Application for Modulation Analysis of Signals with Multiple Modulations (R&S®FPL1-K70 Required) (software license) | |
| BER Measurement Application with PRBS Data (R&S®FPL1-K70 Required) (software license) | |
| Extension of the 3 year standard product warranty to 4 years for FPL1003: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair | |
| Extension of the 3 year standard product warranty to 5 years for FPL1003: - All repairs and all necessary R&S®Manufacturer-Calibrations in case of repair |
Showing 1 - 1 of 1 results
1
Spektrum analyser 5 kHz to 3 GHz -148 dBm to +30 dBm resolution bandwidth 1 Hz to 10 MHz 10.1 in mul
Product ID: P-647881
Rent
Availability confirmed on quote
Quote
Source New
Enquire about our range of financial solutions
Showing 1 - 1 of 1 results
* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, VAT or sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm timescales.
Can't find what you are looking for?
Get in touch
Related Products
