EXFO FTBX-88200NGE

Optie-ID	Beschrijving
2.5G-Bundle	Enables support for the following SONET/SDH rates
40GE	Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564)
52M	Enables 52Mbit/s optical Rate Interface
100GE	Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564)
ETH-CAPTURE	full line rate Ethernet
FTB-2-PRO	2-slot capacity PRO Modular mainframe
GigE-Bundle	Enables EtherBERT, RFC2544 with Smart Loopback, EtherSAM (Y.1564)
iOptics	Intelligent Pluggable Optic Test Application
iSAM	Ultra Simple version of Y.1564, including MEF 23.1 thresholds.
ODUMUX	Enables single and multi-stage ODU multiplexing test functions
SONET-SDH	SONET+SDH base software package
TK-2X-PRO-S1-64G	TK-2X-PRO-S1-64G - Mainfr
TRAFFIC-SCAN	Enables the discovery of C, S, E-VLAN and their priorities.

Kenmerk	Waarde
Form Factor	Handheld
Form Factor	Modular

Productoverzicht

Advanced testing of the full suite of new 400G technologies in lab and R&D environments. To keep pace with bandwidth demands, network operators are supporting higher transmission rates and data centers are upgrading both the capacity and number of their facilities. The industry standards’ bodies are pushed to develop more and faster Ethernet speeds, such as 400GE, to support trends like IoT, cloud, big data, and 5G.

Network infrastructure planners must deal with skyrocketing demands for more bandwidth, including in the data center interconnect (DCI) or even in core and metro networks. Network equipment manufacturers (NEMs) continue to push the limits of technology, developing increasingly innovative 400G solutions. Service providers are constantly expanding their networks, looking for more efficient and cost-effective ways to deploy those high-speed circuits.

Key Features

With EXFO’s Open Transceiver System (OTS): innovative, evolutionary design enabling any transceiver (now or future) to fit into an EXFO test solution

iOptics test application that quickly validates the sanity of an optical device using minimal configuration

Compatible with FTB-4 Pro Platform capable of running up to four modules simultaneously for up to eight ports of 25 GigE

OTS support for multiple interfaces: dual SFP28, dual QSFP28, single CFP4

Compatible with EXFO’s LTB-8 Rackmount Platform featuring hot-swap capability for lab use

Combine with FTBx-88200NGE module for 10M to 100G in a single testing solution

Dual-port Ethernet testing capability up to 50GE including a complete Ethernet test suite

Compatible with FTB-2 Pro Platform capable of running up to two modules simultaneously for up to four ports of 25 GigE

Supported by EXFO Multilink, a web-based application for easy multi-user management and remote access

Specifications
Power Blazer Modules Overview
Ordering Information
Power Blazer Modules	FTBx-8870	FTBx-8880	FTB-88100G	FTB-88100NGE	FTBx-88200NGE	FTBx-88260
DSn/PDH (DS1/E1)	•	•
DSn/PDH (DS3, E3 and E4)		•
OTN OTU1/2	•	•		•	•	•
OTN OTU3/4			•	•	•	•
ODUMux	•	•	•	•	•	•
Multichannel OTN and Mixed Mapping Testing					•
OTN GCC BERT	•	•	•	•	•	•
SONET/SDH	•	•	•	•	•	•
40G OC-768/STM-256			•	•
Fibre Channel (1X, 2X, 4X, 8X and 10X)	•	•		•	•
Fibre Channel 16X					•
1588 PTP/SyncE	•	•		•	•	•
Wander		•
Carrier Ethernet OAM	•	•		•	•	•
Link OAM	•	•		•	•	•
25GE						•
RFC 2544 (up to 100G)	•	•	•	•	•	•
ITU-T Y.1564 Testing	•	•	•	•	•	•
RFC 6349 (up to 10G TCP)	•	•		•	•	•
RFC 6349 (40G and 100G)			•	•	•	•
eCPRI 10 G	•	•			•	•
eCPRI 25 G						•
CPRI 1.2 Gbit/s to 10.1 Gbit/s	•	•		•	•
OBSAI 1.5 Gbit/s, 3.1 Gbit/s and 6.1 Gbit/s	•	•		•	•
Dual-Port Ethernet Testing	•	•		•	•	•
Smart Loopback	•	•	•	•	•	•
Dual Test Set	•	•	•	•	•	•
iOptics	•	•	•	•	•	•
iSAM	•	•	•	•	•	•
OpticalRF and BBU Emulation	•	•

Specifications
Power Blazer Series
Model Overview
Model	Description
Dual SFP28	10G / 25G / FC32x data rates Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN, SONET/SDH, FC testing The dual port can be shared with another OTS module, one port from each OTS module
Dual QSFP28	40G/100G data rates Framed Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN testing The dual port can be shared with another OTS module, one port from each OTS module
Single CFP4	100G data rate Ethernet Dual Port testing (EBERT, RFC2544, ESAM, TGEN), OTN testing The dual port can be shared with another OTS module, one port from each OTS module
Sync	Built-in GPS Ideal solution for latency and clock testing Next-generation timing application