Keysight Technologies (formerly Agilent) U2022XA | 50MHz-40GHz USB Wideband Power Sensor | Electro Rent

Optie-ID	Beschrijving
DEMACC	Demo Accessories
R-50C-011-3	Calibration Assurance Plan - Return to Keysight - 3 years
R-50C-011-5	Calibration Assurance Plan - Return to Keysight - 5 years
R-50C-011-MU-3	Keysight Calibration + Uncertainties - 3 years
R-50C-011-MU-5	Keysight Calibration + Uncertainties - 5 years
R-50C-021-3	ANSI Z540-1-1994 Calibration - 3 years
R-50C-021-5	ANSI Z540-1-1994 Calibration - 5 years
R-51B-001-5Z	Warranty Assurance Plan - Return to Keysight - 5 years
U2000A-201	Transit case
U2000A-202	Soft carrying case
U2000A-203	Holster
U2000A-204	Soft carrying pouch
U2000A-301	Power sensor cable; 5-ft (1.5m)
U2000A-302	Power sensor cable; 10-ft (3m)
U2000A-303	Power sensor cable; 16.4-ft (5m)
U2021XA-CD1	Documentation Optical Disk
U2022XA-0B1	English language user guide; printed
U2022XA-0BF	English language programming guide; printed
U2022XA-0BN	English language service guide; printed
U2022XA-1A7	Keysight Calibration + Uncertainties + Guardbanding
U2022XA-100	2.4mm Connector
U2022XA-A6J	ANSI Z540-1-1994 Calibration
U2022XA-ABJ	Japan - Japanese user guide; printed
U2022XA-H50	USB Wideband Power Sensor (50MHz - 50GHz)
U2022XA-INT	For demo use only
U2022XA-UK6	Commercial calibration certificate with test data included
U2031A	Power Sensor cable; 5-ft (1.5m)
U2031B	Power Sensor cable; 10-ft (3m)
U2031C	Power Sensor cable; 16.4-ft (5m)
U2032A	Trigger cable BNC male to SMB female 50ohm, 1.5meter length
W4100-3MW	Warranty, 3mth for included accessories

Kenmerk	Waarde
High Frequency (range)	20GHz <= 50GHz

Productoverzicht

Keysight U2020 X-series USB power sensors provides the peak and average power measurement capability of a power meter in a compact and portable form factor.

The Keysight U2020 X-series USB peak and average power sensors come bundled with the N1918A Power Analysis Manager software at no additional cost. Simply connect the sensor to your PC to perform complex pulse analysis and standard average power measurement.

The U2020 X-Series is also supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming.

Key Features

Frequency range of 50 MHz to 40 GHz

Wide dynamic range of -30 to +20 dBm (peak/gated), -45 dBm to 20 dBm (average only mode)

30 MHz video bandwidth and single shot real-time capture at 80 Msample/sec per second

Internal zeroing & calibration

High measurement speed of up to 25,000 readings/second (free run/fast buffer mode)

A BenchVue software license (BV0007B) is now included with your instrument.

BenchVue makes it simple to connect, control instruments, and automate test sequences.

Benefits

Perform measurements direct from your PC

The U2020 X-Series is supported by the Keysight BenchVue software.

BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming.

Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform complex pulse analysis and standard average power measurement.

Built in external trigger in and out

External trigger will enable accurate trigger of small signals close to the signal noise floor.

With the built-in trigger in/out connection on the Keysight U2020 X-series USB power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.

Specifications
U2020 X-Series
Model Overview
Model	U2021XA	U2022XA
Frequency Range	50 MHz to 18 GHz	50 MHz to 40 GHz 50 MHz to 50 GHz (with Option H50)
Power Range (Normal Mode)	–30 dBm to 20 dBm (50 MHz to <500 MHz) –35 dBm to 20 dBm (500 MHz to 40 GHz) –35 dBm to 8 dBm (> 40 GHz to 50 GHz)	–30 dBm to 20 dBm (50 MHz to <500 MHz) –35 dBm to 20 dBm (500 MHz to 40 GHz) –35 dBm to 8 dBm (> 40 GHz to 50 GHz)
Power Range (Average Only Mode (1)(2))	–45 dBm to 20 dBm (50 MHz to 40 GHz) –45 dBm to 8 dBm (> 40 GHz to 50 GHz)	–45 dBm to 20 dBm (50 MHz to 40 GHz) –45 dBm to 8 dBm (> 40 GHz to 50 GHz)
Damage Level	23 dBm (average power) 30 dBm (< 1 μs duration) (peak power)	23 dBm (average power) 30 dBm (< 1 μs duration) (peak power)
Rise/Fall Time	≤ 13 ns (3)	≤ 13 ns (3)
Maximum Sampling Rate	80 Msamples/sec, continuous sampling	80 Msamples/sec, continuous sampling
Video Bandwidth	≥ 30 MHz	≥ 30 MHz
Single-Shot Bandwidth	≥ 30 MHz	≥ 30 MHz
Minimum Pulse Width	50 ns (4)	50 ns (4)
Basic Accuracy of Average Power Measurement (5)	≤ ± 0.2 dB or ± 4.5%	≤ ± 0.3 dB or ± 6.7%
Maximum Capture Length	1 s (decimated) 1.2 ms (at full sampling rate)	1 s (decimated) 1.2 ms (at full sampling rate)
Maximum Pulse Repetition Rate	10 MHz (based on 8 samples/period)	10 MHz (based on 8 samples/period)
Connector Type	N-type (m)	2.4 mm (m)

Specifications
U2020 X-Series USB Peak and Average Power Sensors
Model Overview
Model	Description
U2021XA	X-Series USB peak and average power sensor, 50 MHz to 18 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration
U2022XA	X-Series USB peak and average power sensor, 50 MHz to 40 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration
U2022XA-H50	X-Series USB peak and average power sensor, 50 MHz to 50 GHz Included Accessories: Power sensor cable 5 ft (1.5 m), default cable length BNC male to SMB female trigger cable, 50 Ω, 1.5 m (Quantity: 2) Certificate of calibration