Producten FABRIKANT SERVICES Oplossingen Resources Promotions About Us

Snelle Offerte: Omicron TESTRANO 600

+31 (0) 318 588 688Hebt u hulp nodig? Spreek met een van onze experts.

Omicron TESTRANO 600

Three Phase Power Transformer Test System

Model

TESTRANO 600

Productgroep

Electrical & Power Quality

Fabrikant

Omicron

Geconfigureerde modellen bevatten de volgende opties:

Electrical & Power QualityTransformer and Motor Testing

Configuraties

Belangrijke specificaties

Productoverzicht

Hulpbronnen

Kies uw configuratie

Show:

Zoek & combineer opties, bijv. 'C4000; M400'

Beschikbare opties voor Omicron TESTRANO 600

Optie-ID	Beschrijving
VE000707	Advanced 3 Phase TTS
VEHO0700	TouchControl Option
VEHP0076	Accy Transport Case

Toont 1 - 1 van 1 resultaten

3-Phase power transformer test system

Product-ID: P-433443

VEHO0700 • TouchControl OptionVE000707 • Advanced 3 Phase TTSVEHP0076 • Accy Transport Case

Huren

Bevestigd bij offerte

Offerte

Aantal

Weken

Startdatum

Gebruikt

Beschikbaarheid wordt op de offerte vermeld

Inlichtingen

E-mail +31 (0) 318 588 688

Financiele Oplossingen

Vraag nu om meer informatie

Toont 1 - 1 van 1 resultaten

* Prijzen en beschikbaarheid kunnen zonder voorafgaande kennisgeving worden gewijzigd. Alle prijzen kunnen variëren als gevolg van verzendvoorwaarden, btw of omzetbelasting, invoerrechten en wisselkoersen. Producten zijn mogelijk niet op alle locaties beschikbaar. Alle vermelde besparingen zijn gebaseerd op de volledige catalogusprijs van nieuwe instrumenten; werkelijke besparingen kunnen variëren op basis van optie (s), configuratie, wisselkoersen en andere factoren. Garantie kan variëren per categorie of specifiek beschikbaar product. Alle voorwaarden worden bevestigd door volledige schriftelijke offerte.

Productoverzicht

TESTRANO 600 is the world's first portable three-phase tester that supports all common electrical tests of single-phase and three-phase power and distribution transformers for routine and diagnostic tests on site or during factory acceptance tests.

The use of TESTRANO 600 enables various tests of power transformers to be carried out without having to reconnect. Thus, the TESTRANO 600 shortens the testing time to a third compared to conventional single-phase testers.

Key Features

True three-phase power transformer test system

Powerful device with 3 x 33 A DC or 400 V AC

Reduced connection effort as the same connection can be used for various tests

Three times faster testing

Total weight of 20 kg / 44 lbs – ideal for on-site testing

Benefits
Transformer Turns Ratio	Transformer turns ratio (TTR) measurements verify the operating principle of a power transformer to detect shorted turns and open-circuited conditions. In order to perform this test with up to 12 kV, the CP TD12 and MCA1 are required.
Exciting Current	Exciting current measurements are performed to assess the turn-to-turn insulation of the windings, the magnetic circuit of a transformer as well as the tap changer. In order to perform this test with 10 kV, the CP TD12 is required.
DC Winding Resistance	DC winding resistance measurements are used to assess contact problems of the windings and tap changers.
Dynamic Resistance	Dynamic resistance measurements (DRM) are used to check the on-load tap changer (OLTC) for poorly maintained and damaged OLTC contacts.
Vibro-Acoustic Measurement	The vibro acoustic measurement records a unique vibration pattern during the operation of the on-load tap changer to evaluate the mechanical integrity of the OLTC.
Cool Down Test	The cooldown test is performed to determine the winding temperature at the end of the heat run procedure by means of a winding resistance measurement.
Vector Group Check	The vector group check can be used to determine the vector group of the power transformer.
Short-Circuit Impedance / Leakage Reactance	Leakage reactance / short-circuit impedance measurements are sensitive methods to assess possible deformation or displacements of windings.
Frequency Response of Stray Losses	The frequency response of stray losses (FRSL) test identifies short-circuits between parallel strands and local overheating due to excessive eddy current losses.
Demagnetization	Demagnetization of the core is recommended after DC has been applied; e.g. during winding resistance tests. The risk of high inrush currents during energization, and influences on other tests are reduced.
Power / Dissipation Factor (with CP TD12)	Power/dissipation factor and capacitance measurements are performed to investigate the insulation of power transformers and bushings.
Quick Test	The Quick Test is TESTRANO 600’s swiss army knife. You can define your own test procedures and perform special measurements like magnetic balance or zero-sequence impedance.

Specifications
Testrano 600 Three-Phase Test system
Package Overview
Testrano 600 Package (Order Number)	Basic (P0000703)	Standard (P0000705)	Enhanced (P000200)	Advanced (P0000710)	Universal (P0000748)
PTM Standard software license; Including Manual Control Mode and Report Generator	■	■	■	■	■
Quick test	■	■	■	■	■
Transformer Turns Ratio (TTR) / Exciting Current	■	■	■	■	■
DC Winding Resistance	■	■	■	■	■
Demagnetization	■	■	■	■	■
Short-Circuit Impedance / Leakage Reactance	--	■	■	■	■
Frequency Response of Stray Losses (FRSL)	--	■	■	■	■
Power / Dissipation Factor and Capacitance (incl. CP TD12 and its accessories)	--	--	--	■	■
OLTC Scan / Dynamic Resistance Measurement (DRM)	--	--	■	--	■
Vector Group Check	--	--	■	--	■
Cooldown Test	--	--	--	--	--
Power Losses at Low Voltage	■	■	■	■	■

Note:

■ = Included

-- = Not Included

Specifications
Testrano 600 Three-Phase Test system
Model Options and Accessories Overview
Advanced Control Options	Description	Order Number
TESTRANO 600 TouchControl (for new device)	TESTRANO 600 TouchControl featuring an integrated 10.6“ color touch display	VEHO0700
TESTRANO 600 TouchControl (retrofit option)	TESTRANO 600 TouchControl featuring an integrated 10.6“ color touch display	P0006234
PTM Advanced software license	License for PC software upgrade adding guided workflow, customized test plans, automatic assessment, graphical comparison and trending	P0006797
Upgrade Options
"Short-circuit impedance / leakage reactance" module	Software license upgrade to perform short-circuit impedance / leakage reactance tests and frequency response of stray losses (FRSL)	P0006795
"OLTC scan and transient recording" module	Software license upgrade to perform dynamic resistance measurements (DRM) including motor current recording for OLTC	P0006796
"Vector group check" module	Software license to automatically determine the vector group of the transformer	P0006799
"Cooldown test“ module	Software license to perform cooldown tests Note: Requires TouchControl option (VEHO0700 / P0006234)	P0006800
CP TD12 upgrade option	Upgrade option to expand your exisiting TESTRANO 600 to a power / dissipation factor test system	P0005857
VAM1 upgrade option	Upgrade option to perform vibro-acoustic measurements on OLTC Note: For the motor current measurement a current clamp such as the C-Probe 1 (P0006362) is needed	P0000821
Accessories
TESTRANO 600 HV cable extension package	6 m / 19.7 ft extension package for HV cables for large power transformers	P0006204
TESTRANO 600 LV cable extension package	6 m / 19.7 ft extension package for LV cables for large power transformers	P0006205
TESTRANO 600 HV cable	4m / 13 ft HV cable	B1882800
TESTRANO 600 LV cable	4m / 13 ft LV cable	B1882700
TESTRANO 600 tap changer cable	4m / 13 ft tap changer cable	B1882900
SAA2	Cascadable safety accessory (up to six signal lamps) to mark testing area, including emergency button and optional audible signal
SAA3	3-position remote emergency switch, with connection cable (15 m / 49 ft)	P0006323
C-Probe 1	Active AC and DC current probe with voltage output (two measuring ranges: 10 A and 80 A, frequency range: DC to 10 kHz)	P0006434
MCA1	Measurement capacitance to perform transformer turns ratio test up to 12 kV using CP TD12	P0006352
TESTRANO 600 transport case for accessories	Transport case with wheels for TESTRANO 600 accessories	B1449803