Keysight Technologies (formerly Agilent) N9914B | 6.5 GHz FieldFox RF Analyzer | Electro Rent

Optie-ID	Beschrijving
N1972A-710	AC / DC adapter for US / Canada
N1972A-711	AC / DC adapter for Europe / China
N1972A-712	AC / DC adapter for non US / Canada / Europe / China
N9914B-0B0	Download the product manual from the Keysight website
N9914B-010	Vector network analyzer time domain
N9914B-030	Remote control capability
N9914B-208	USB power sensor measurements versus frequency
N9914B-209	Extended Range Transmission Analysis (ERTA)
N9914B-210	Vector network analyzer transmission/reflection
N9914B-211	Vector network analyzer full 2-port S-parameters
N9914B-212	1-port mixed-mode S-parameters
N9914B-215	TDR Cable Measurements
N9914B-233	Spectrum analyzer
N9914B-235	Pre-amplifier
N9914B-236	Interference analyzer and spectrogram
N9914B-238	Spectrum analyzer time gating
N9914B-302	USB power sensor support
N9914B-307	GPS receiver
N9914B-308	Vector voltmeter
N9914B-309	DC bias variable-voltage source
N9914B-310	Built-in power meter
N9914B-312	Channel scanner
N9914B-330	Pulse measurements
N9914B-350	Real-time Spectrum Analyzer
N9914B-351	I/Q analyzer
N9914B-352	Indoor and outdoor mapping
N9914B-355	Analog demodulation
N9914B-356	Noise figure measurements
N9914B-358	EMF measurements
N9914B-360	Phased array antenna control
N9914B-370	Over the air LTE FDD measurements
N9914B-377	Over the air 5G measurements
N9914B-378	Over-the-air (OTA) 5G NR measurements
N9914B-ABA	Printed User's Guide in English
N9914B-B04	Bandwidth, 40 MHz
N9914B-B10	Bandwidth, 100 MHz
R-50C-011-3	Calibration Plan - Return to Keysight - 3 years
R-50C-011-5	Calibration Plan - Return to Keysight - 5 years
R-51B-001-5Z	Extended Warranty - Return to Keysight - 5 years
R-51B-001-7Z	Extended Warranty - Return to Keysight - 7 years
R-51B-001-10Z	Extended Warranty - Return to Keysight - 10 years

Productoverzicht

Given the new dynamics of wideband, microwave and millimeter wave communications, Keysight developed the next generation FieldFox Microwave Analyzer with 100 MHz of real-time bandwidth and frequency coverage up to 26.5 GHz. To address the millimeter wave frequency requirements for 5G, satellite and automotive radar industries, FieldFox can easily extend its frequency up to 110 GHz with an add-on downconverter.

FieldFox is also the industries most integrated handheld analyzer supporting over 20 key RF and microwave instrument functions including signal analyzer, full 2-port vector network analyzer, real-time spectrum analyzer, over-the-air demodulation, CW signal source, power meter and many more, in an all-in-one field proof package.

Key Features

Base model includes cable and antenna analyzer.

Expand capabilities with vector network analyzer and spectrum analyzer options.

Capture elusive signals with 100 MHz gap-free, real-time bandwidth.

Measure all four S-parameters simultaneously with 115 dB dynamic range.

Make accurate spectrum analyzer measurements (± 0.3 dB) without warmup.

Perform over-the-air measurements for 5G NR and LTE.

Use GPS/GNSS for geolocation and timestamping.

Carry one lightweight  unit at 3.4 kg (7.4 lb).

Benefits

Built For 5G

5G technologies provide dramatic network speed improvement and superfast connection time.

5G New Radio (NR) is the 3rd Generation Partnership Project (3GPP) standard for the wireless network running on the sub-7.125 GHz frequency band (FR1) and above 24.250 GHz on the millimeter-wave (mmWave) frequency band (FR2). 5G offers gigabit per second data rates.

5G networks use wider bandwidths, higher operating frequencies, and active antenna systems, such as phased array antennas.

The key challenges for 5G network deployment are characterizing air interface path loss, optimizing beam coverage, and mitigating interference issues.

Keysight’s 5G gNodeB (gNB) field test solution, based on the FieldFox microwave analyzer, provides a complete toolkit for radio frequency (RF) engineers and technicians to install and troubleshoot 5G networks.

This solution can verify hardware gNB performance, such as cable and antenna conditions, transmit power, control channel power, and RF spurious responses.

It can also verify signal quality over the air, including multipath synchronization signal information and coverage area path loss, as well as identify and troubleshoot interference issues.

Specifications
N9914B FieldFox Handheld Microwave Analyzer
Features	Parameters
Maximum Frequency	6.5 GHz
Minimum Frequency	30 kHz
SA Start Frequency	5 kHz
System Dynamic Range	> 114 dB
Best Speed at 1001 Point, 1 Sweep	171 us/pt
Output Power	8 dBm
Trace Noise	n/a
Number of Built-In Ports	2 ports
Instrument Type	Combination Analyzer
Cable and Antenna Analyzer	Yes - Standard
Spectrum Analyzer	Yes - Optional
Vector Network Analyzer	Yes - Optional
Additional CAT/VNA Based Features	Vector Voltmeter Mixed-Mode S-Parameters DTF/TDR Cable Measurements
Additional SA Based Features	Built-In Power Meter Extended Range Transmission Analysis (ERTA) Real-Time Spectrum Analysis Noise Figure Measurements Over-The-Air Measurements
System Features	Built-In DC Source GPS Receiver - Internal Only Remote Control Capability
Power Measurement Using USB Sensor	CW or Swept-Frequency Frequency-Offset RF Pulse Test with Peak Sensor
Standard Attenuator Range	n/a
Standard Attenuator Step	n/a
DANL @1 GHz	-163 dBm
Maximum Analysis Bandwidth	n/a
Phase Noise @1 GHz (1 MHz offset)	n/a
Phase Noise @1 GHz (10 kHz offset)	-117 dBc/Hz
Phase Noise @1 GHz (30 kHz offset)	n/a
Spur Free Dynamic Range	n/a
TOI @1 GHz (3rd Order Intercept)	n/a
Applications Available	Yes
Maximum Real-Time Bandwidth	n/a
Overall Amplitude Accuracy	n/a
Bandwidth Options	n/a
Performance Level	n/a
Applications-Cellular	89600 VSA Software Over-The-Air LTE FDD and 5GTF
Applications-Digital Video	n/a
Applications-General Purpose	AM/FM Tune and Listen Cable and Antenna Analysis Field Strength Measurement SCPI Code Compatibility Spectrogram Stimulus Response
Applications-Wireless Connectivity	n/a
Handheld / Modular	Yes

Specifications¹
FieldFox RF and Microwave (Combination) Analyzers
Model Overview
Model	Description	CAT and VNA Frequency	SA Frequency²	Test Port Connectors
N9913B	4 GHz FieldFox RF analyzer	30 kHz to 4 GHz	9 kHz to 4 GHz	Type-N (f)
N9914B	6.5 GHz FieldFox RF analyzer	30 kHz to 6.5 GHz	9 kHz to 6.5 GHz	Type-N (f)
N9915B	9 GHz FieldFox microwave analyzer	30 kHz to 9 GHz	9 kHz to 9 GHz	Type-N (f)
N9916B	14 GHz FieldFox microwave analyzer	30 kHz to 14 GHz	9 kHz to 14 GHz	Type-N (f)
N9917B	18 GHz FieldFox microwave analyzer	30 kHz to 18 GHz	9 kHz to 18 GHz	Type-N (f)
N9918B	26.5 GHz FieldFox microwave analyzer	30 kHz to 26.5 GHz	9 kHz to 26.5 GHz	3.5 mm (m)
N9950B	32 GHz FieldFox microwave analyzer	300 kHz to 32 GHz	9 kHz to 32 GHz	2.4 mm (m)
N9951B	44 GHz FieldFox microwave analyzer	300 kHz to 44 GHz	9 kHz to 44 GHz	2.4 mm (m)
N9952B	50 GHz FieldFox microwave analyzer	300 kHz to 50 GHz	9 kHz to 50 GHz	2.4 mm (m)
N9953B	54 GHz FieldFox microwave analyzer	300 kHz to 54 GHz	9 kHz to 54 GHz	1.8 mm (m)

Notes:

¹ Models N9913/33B, N9914/34B and N9915/35B do not support frequency extenders. This is because the mixers’ starting LO frequency is higher than 9 GHz and the FieldFox Port 1 provides the LO to the mixer.

² Useable to 5 kHz.