Configured models contain the following attributes:
RF & Microwave Spectrum AnalyzersSpectrum Analyzers-Performance20GHz <= 50GHzDC <= 1kHzBenchtopOption | Description |
---|---|
5 year extended cal and warranty | |
OCXO, precision frequency reference. Aging/year : 3x10E-8, temperature drift : 1x10E-9. | |
Resolution bandwidth up to 80 MHz 20MHz, 40 MHz, 50 MHz and 80 MHz additionally; not installable postfactory | |
Resolution Bandwidth up to 40 MHz for R&S®FSW. Retrofittable in service. (software license) | |
External generator control, retrofittable in Rohde & Schwarz service (hardware option) | |
High pass filter, improved dynamic range for measurement of harmonics, suppression of fundamental signals from 500MHz to 1.5GHz. | |
Digital Baseband Interface, for signal and spectrum analyzer R&S®FSW (software license) | |
Solid state drive, 8GB | |
LO/IF connections for external mixers for FSW26, FSW43, FSW50 and FSW67 retrofit in Rohde & Schwarz service. | |
RF preamplifier, 30dB, 100kHz to 43GHz, for R&S®FSW43, retrofit in Rohde & Schwarz service (hardware option) | |
28MHz analysis bandwidth | |
Analog base band inputs, analysis bandwidth 40MHz, for R&S FSW26 and R&S FSW43, retrofittable in Rohde & Schwarz service (hardware option) | |
80MHz analysis BW for B71 | |
160MHz analysis bandwidth | |
160MHz analysis bandwidth | |
512MHz Analysis bandwidth | |
Extension to 512 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option) | |
Real time spectrum analyz | |
Real-time spectrum analyzer 512 MHz for R&S®FSW8/13/26/43/50/67/85 retrofittable in R&S service (hardware option) | |
1200MHz analysis bandwidt | |
Extension to 1200 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option) | |
Extension to 2 GHz signal analysis bandwidth retrofittable in R&S service requires an R&S®RTO1044 or R&S®RTO2044 with R&S®RTO-B4 oscilloscope as external digitizer. (hardware option) | |
Extension to 2000 MHz internal signal analysis bandwidth. | |
Extension to 4400 MHz signal analysis bandwidth (HW opt.) | |
Extension to 5 GHz signal analysis bandwidth for R&S®FSW43 | |
Pulse measurement application (software license) | |
AM/FM/PM Modulation analysis application for modulation analysis of analog single carrier signals | |
GSM measurement application, GSM, EDGE, EDGE Evolution and VAMOS (software license) | |
Multi carrier group delay measurement application (software license) | |
Power amplifier and envelope tracking measurement application (software license) | |
Noise Power Ratio Measurement (SL) (software license) | |
Noise Power Ratio Measurement (SL) (software license) | |
Noise figure measurement application, noise source required, preamplifier R&S®FSW-B24 recommended (software license) | |
Phase noise measurement application (software license) | |
Measurement application for detection and display of low level spurious signals (software license) | |
Transient measurement application (software license) | |
Transient measurements, extension chirp analysis, R&S®FSW-K60 required (software license) | |
Vector signal analysis application, for modulation analysis on digital modulated single carrier signals | |
Vector Signal Analysis Application for modulation analysis of signals with multiple modulations, requires option R&S®FSW-K70 (software license) | |
BER measurement application with PRBS data, requires option R&S R&S®FSW-K70 (software license) | |
3GPP FDD (WCDMA) BS measurement application, incl. HSDPA and HSDPA+ (software license) | |
EUTRA/LTE FDD Downlink measurement application. | |
EUTRA/LTE TDD Downlink measurement application. | |
EUTRA/LTE NB-IoT downlink measurement application (software license) | |
V5GTF testing | |
5G NR R15 downlink Measurement Application. | |
3GPP 5G-NR uplink | |
512MHz real-time measurement application | |
User defined frequency response correction by SnP file in touch stone file format. Corrects frequency response (amplitude and phase) of measurement setup. (software license) | |
Customized digital baseband connection for R&S FSW, including netlist for XILINX FPGA R&S FSW-B517 required (software license) | |
320MHz Analysis bandwidth | |
Upgrade from 1200 MHz to 2000 MHz signal analysis bandwidth, option R&S FSW-B1200 or R&S FSW-U1200 required, user-retrofittable (software license) | |
Rack Mount kit |
Showing 1 - 6 of 48 results
Product ID: P-643550
Availability confirmed on quote
Quote
Product available under Certified Pre-Owned Program.
Find out moreAvailability confirmed on quote1
$158,000.00*$239,900.00
This product may be available by an alternative finance solution.
Product ID: P-180977
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-577343
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-434153
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-648003
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Product ID: P-654777
Availability confirmed on quote
Quote
This product may be available by an alternative finance solution.
Showing 1 - 6 of 48 results
How do I select a configuration?
You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.
What’s the difference between Quote and Buy?
You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.
Can I add extra items or make special requests?
Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.