You are browsing the LATIN_EN site. Would you like to be redirected to another country or region to see content and products specific to your location?

Quick quote: Rohde & Schwarz FSWP26 (1322.8003.26)

Rohde & Schwarz FSWP26 (1322.8003.26)

Phase Noise Analyzer; 1 MHz to 26.5 GHz
Model
FSWP26 (1322.8003.26)
Product Family
RF & Microwave Power
Manufacturer
Rohde & Schwarz

Configured models contain the following attributes:

RF & Microwave PowerNoise & OtherNoise Test Sets
Configurations
Key Specs
Product Overview
Resources

Choose your configuration

Show:

Available Options for Rohde & Schwarz FSWP26 (1322.8003.26)

OptionDescription
Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
High stability OCXO
Resolution BW >10MHz
Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)
External generator control Retrofittable in Rohde&Schwarz service (hardware option)
High pass filter improved dynamic range for measurement of harmonics, suppression of fundamental signals from 300 MHz to 1.8 GHz, option R&S®FSWP-B1 required (software license)
Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)
Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)
RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)
Cross correlation
Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)
Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)
Signal source for additiv
Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Extension to 80 MHz signal analysis bandwidth, includes microwave preselector bypass option R&S®FSWP-B1 required (software license)
Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)
All software options active
Measurement application for pulsed phase noise and additive pulsed phase noise (software license)
Pulse measurement application R&S®FSWP-B1 required (software license)
Pulse stability measureme
Time Sidelobe Measurment
Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)
Noise figure measurement application noise source required, R&S®FSWP-B1 required Preamplifier R&S®FSWP-B24 recommended (software license)
Security Write Protection
Measurement application for detection and display of low level spurious signals (software license)
Transient measurement application (software license)
Chirp analysis extension
Hopping analsis extension
Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Upgrade of internal signal source for additive phase noise meas.
Windows 10

Showing 1 - 6 of 34 results

1
2
6
1

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-605572

FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B60 (1322.9800.26) • Cross correlation for phase noise analyzer R&S FSWP26 from 1 MHz to 26 GHz (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

2

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-605556

FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

3

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-605601

FSWP-B4 (1325.3890.02) • High stability OCXOFSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B60 (1322.9800.08) • Cross correlationFSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

4

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-607787

FSWP-B61 (1325.3719.26) • Cross correlation for phase noise analyzer R&S®FSWP26 from 1MHz to 26GHz Low phase noise, includes R&S®FSWP-B4, excludes option R&S®FSWP-B60 (hardware option)FSWP-K4 (1325.5034.02) • Measurement application for pulsed phase noise and additive pulsed phase noise (software license)FSWP-K6 (1325.4221.02) • Pulse measurement application R&S®FSWP-B1 required (software license)FSWP-K7 (1325.4238.02) • Modulation analysis application for modulation analysis of analog (AM, FM, PM) modulated single carrier signals, R&S®FSWP-B1 required (software license)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-K70 (1325.4280.02) • Vector signal analysis for modulation analysis on digital modulated single carrier signals R&S®FSWP-B1 required (software license)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

5

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-245911

FSWP-K60H (1338.4548.02) • Hopping analsis extensionFSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B320 (1338.3235.04) • Extension to 320 MHz signal analysis bandwidth (retrofit in service) (hardware option)FSWP-B18 (1331.4313.02) • Solid state drive, 64 GB with analyzer firmware for exchange against standard SSD for instruments with IPC11 CPU board (hardware option)FSWP-B10 (1325.5463.02) • External generator control Retrofittable in Rohde&Schwarz service (hardware option)
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

6

Phase noise analyzer and VCO tester 1 MHz to 26.5 GHz optionally with cross correlation and spectrum

Product ID: P-366356

FSWP-B1 (1322.9997.26) • Signal and spectrum analyzer 10 Hz to 26 GHz for R&S®FSWP26 (hardware option, retrofittable in factory)FSWP-B21 (1325.3848.02) • Support for harmonic mixers, includes LO/IF ports for external mixers for R&S®FSWP for x-corr option FSWP-B64 required (hardware option)FSWP-B24 (1325.3725.26) • RF Preamplifier, 20 dB 100 kHz to 26 GHz for R&S®FSWP26 option R&S®FSWP-B1 required (hardware option)FSWP-B8 (1325.5028.26) • Resolution bandwidth up to 80 MHz, 20 MHz and 50 MHz additionally, for R&S FSWP8 and R&S FSWP26, option R&S FSWP-B1 required (hardware option)FSWP-B64 (1322.9900.27) • Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB stepsFSWP-B4 (1325.3890.02) • High stability OCXO
Rent

Availability confirmed on quote

Quote

Used

Availability confirmed on quote

Inquire

Looking For New?

This product may be available by an alternative finance solution.

Showing 1 - 6 of 34 results

1
2
6
NOTE: If you’re in Canada, please use the ‘Quote’ option. Online Purchase is currently only available for US addresses, either via Card or Purchase Order.

How do I select a configuration?

You can scroll through configurations, search for options (separated by ;) above, and filter by Rental, New & Used. Or, let our experts guide you to the right solution by simply using ‘Quick Quote’ at the top of the page.

What’s the difference between Quote and Buy?

You can request a Quote for any item. Many New and Used items are also available to Buy online! You can mix your cart with items to Quote and items to Buy online. You’ll be able to complete the Quote and Buy checkout process at the same time. To check details, simply use ‘Quote’ and we’ll confirm everything. You can now buy either by card or by supplying a Purchase Order (P.O.). Note that P.O's will require verification and account set-up if you do not have an account.

Can I add extra items or make special requests?

Look out for the ‘Additional Information’ field when submitting your details. Use this for extra accessory or special calibration requests or for special delivery instructions. We’ll contact you when we receive your Order or Quote to fulfil.

* Prices & availability are subject to change without notice. All prices may vary due to shipping terms, sales tax, import duties, and exchange rates. Products may not be available in all locations. Any listed savings are based on the full list price of new instruments and are indicative depending on date of list; actual savings may vary based on option(s), configuration, currency exchange rates, and other factors. Warranty may vary by category or specific available product. All terms to be confirmed by full written quote or available to review in the Payment page when you buy online.
1 For Certified Pre-Owned equipment, units go into 23-step certification checks before shipping and we will confirm lead times.

Can't find what you are looking for?

Get in touch
Can't find what you are looking for?
loader
loader logo