Keysight Technologies N5256AW10

The millimeter-wave modules are designed for use with the N5260/61/62A Millimeter-wave Module Controllers for banded vector network analyzer systems. Refer to the N5250C or N5261/62A Users Guides (N5260-90001 or N5262-90001) for system connections, operation and functional check. 

The N5256A/B “T/R” Millimeter-wave Module contains an RF source multiplier, dual directional coupler, reference downconverter and a test downconverter. The T/R Millimeter-wave Module is usually the primary module of a millimeter-wave VNA system. A single T/R module allows the measurement of S11 reflection coefficient only.

The single and dual channel receiver modules are used for antenna applications or for 1-port single path S-parameter measurements.

VNA modules enable engineers to conduct mm-wave S-parameters. The DUT interface is the standard waveguide flange that complies with MIL-DTL-3922/67D. Organized by waveguide bands, VNA modules are available from 50 GHz to 0.5 THz.

The N5256AW10 will expand your existing VNA capabilities so you can conduct millimeter wave S-parameter measurements from 75 - 110 GHz.

Modules are available in a variety of S-parameter configurations: T/R, T and/or S. They also offer various options including variable attenuation, low power, intermodulation distortion measurements (IMD) and extended frequency bands.

Notes:

¹ Waveguide models may be ordered with Option 001 (Adjustable RF Attenuator)

Option 002 (15 dB Gain, RF and LO Internal Amplifiers)

Option 003 (Option 001 and Option 002)

Option 004 (IF amp bypass jumpers).

² These models are non-RoHS compliant models. Refer to the B model for RoHS compliant versions

Notes:

¹ Waveguide models with Option 001 (Adjustable RF Attenuator).

² Waveguide models with Option 002 (15 dB Gain, RF and LO Internal Amplifiers).

³ Waveguide models with Option 003 (Option 001 and Option 002), or Option 004 (IF Amplifier Bypass Jumpers).